Bug #1179
closed
After NanoBSD Firmware upgrade pfSense doesn't reboot automatically
0%
Description
When the NanoBSD upgrade by webinterface is done the message 'NanoBSD Firmware upgrade is complete. Rebooting in 10 seconds.' appears but it never reboots. Need to hit enter, losing ssh connection, reconnecting via ssh and do a manual reboot. Had this with both snaps of 1/8.
Updated by Jim Pingle over 13 years ago
- Status changed from New to Feedback
Should be OK after this commit:
https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/7201ca277ed66540baea26ff26ea339ceb15ac9b
N.B.: The next update may still not reboot, but the one after it will, since at the time you do the update you are still running the 'old' code, and won't be on the 'new' code until after the next reboot.
If it doesn't reboot, just go to a shell and run
shutdown -r now
Updated by James Lepthien over 13 years ago
Worked for me now. Just did an update to latest snap and it rebooted automatically.
Updated by Jim Pingle over 13 years ago
- Status changed from Feedback to Resolved