Bug #5986
closed
Multi wan problem with route
0%
Description
Hi,
I have 2 wan interfaces and 1 lan order (wan, lan, wan2)
I setted up interfaces gateways for each ISP.
When default gateway is first WAN interface GW I cannot access from outside to wan2 public address (I have setted up VPN on second interface all rules are ok)(On interface gateway is setted on wan interfaces)
When default gateway is WAN2 interface GW I can access to both WANs
I used before 2.2.2 and I had no problem I could access to any wan no metes of default gateway.
This get broken after update to 2.2.6-RELEASE (amd64)
Please help on this
Thanks in advance.
Updated by Jim Pingle over 8 years ago
- Status changed from New to Not a Bug
Please post on the forum or use one of our available support resources for assistance with your configuration.
Updated by ruben rpuserh over 8 years ago
I found the case,
I passes All VLANS (TRANK) to pfsense and then created 2 wan and 1 lan and this problem happened
I reinstalled pfsense with with 3 physical NICs and now is ok.
So fix the part when all interfaces created from one physical nic as VLANs.
Please keep me updated on this.
Updated by Chris Buechler over 8 years ago
ruben rpuserh wrote:
I found the case,
I passes All VLANS (TRANK) to pfsense and then created 2 wan and 1 lan and this problem happened
I reinstalled pfsense with with 3 physical NICs and now is ok.
So fix the part when all interfaces created from one physical nic as VLANs.
Then your VLAN config was wrong, there are no issues here.