pfSense bugtracker

05/04/2015

08:53 AM pfSense Bug #4674 (Resolved): invalid state table entries after WAN IP change

This is similar to Bug #1629. I have a SIP client behind pfsense 2.2.2. When the WAN IP changes, there is a state tab... Daniel Haid

05/03/2015

07:19 PM pfSense Bug #1629: invalid state table entries after WAN IP change

I have checked again, with the patch, it seems to work even without ip_change_kill_states. I do not know whether I sa... Daniel Haid

05/02/2015

10:09 PM pfSense Bug #1629: invalid state table entries after WAN IP change

I have the same issue with a SIP client. It seems that the SIP client creates a new entry in the short time after flu... Daniel Haid

04/23/2015

04:56 AM pfSense Bug #4639: NAT fails to correctly translate udp port numbers embedded in certain ICMP error packets

I found the pf-rule that causes the problem:
pass out route-to ( pppoe0 2.2.2.2 ) from 1.1.1.1 to !1.1.1.1/32 tra... Daniel Haid

04/21/2015

12:20 PM pfSense Bug #4639: NAT fails to correctly translate udp port numbers embedded in certain ICMP error packets

I have now tried to reproduce this on a pure FreeBSD 10.1 installation, but everything seems to be working correctly ... Daniel Haid

04/18/2015

02:52 PM pfSense Bug #4639 (Resolved): NAT fails to correctly translate udp port numbers embedded in certain ICMP error packets

I think I found a bug in the NAT of the packet filter, but I am not sure. My
setup is as follows.
client (linux)
... Daniel Haid