|
PC Engines APU BIOS build date: Sep 8 2014
|
|
Total memory 4096 MB
|
|
AMD G-T40E Processor
|
|
CPU MHz=1000
|
|
Press F10 key now for boot menu:
|
|
drive 0x000f2a90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=62533296
|
|
Booting from Hard Disk...
|
|
|
|
1 pfSense
|
|
2 pfSense
|
|
|
|
F6 PXE
|
|
Boot: 2
|
|
/boot/config: -S115200 -hConsoles: serial port
|
|
BIOS drive C: is disk0
|
|
BIOS 639kB/3653948kB available memory
|
|
|
|
FreeBSD/x86 bootstrap loader, Revision 1.1
|
|
(root@pfs22-amd64-builder, Tue Jun 23 16:55:52 CDT 2015)
|
|
Loading /boot/defaults/loader.conf
|
|
/boot/kernel/kernel text=0x1223dd0 data=0x881ae0+0x3576a0 syms=[0x8+0x16f080+0x8+0x16c4cc]
|
|
|
|
Hit [Enter] to boot immediately, or any other key for command prompt.
|
|
Booting [/boot/kernel/kernel]...
|
|
KDB: debugger backends: ddb
|
|
KDB: current backend: ddb
|
|
Copyright (c) 1992-2014 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
FreeBSD is a registered trademark of The FreeBSD Foundation.
|
|
FreeBSD 10.1-RELEASE-p13 #0 c77d1b2(releng/10.1)-dirty: Tue Jun 23 17:00:47 CDT 2015
|
|
root@pfs22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64
|
|
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
|
|
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
|
|
Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2 Stepping = 0
|
|
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
|
|
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
|
|
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
|
|
AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
|
|
TSC: P-state invariant, performance statistics
|
|
real memory = 4815060992 (4592 MB)
|
|
avail memory = 4080549888 (3891 MB)
|
|
Event timer "LAPIC" quality 400
|
|
ACPI APIC Table: <CORE COREBOOT>
|
|
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
|
|
FreeBSD/SMP: 1 package(s) x 2 core(s)
|
|
cpu0 (BSP): APIC ID: 0
|
|
cpu1 (AP): APIC ID: 1
|
|
random device not loaded; using insecure entropy
|
|
ioapic0 <Version 2.1> irqs 0-23 on motherboard
|
|
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
|
|
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806345e0, 0) error 1
|
|
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
|
|
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80634690, 0) error 1
|
|
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
|
|
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80634740, 0) error 1
|
|
wlan: mac acl policy registered
|
|
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8060ce10, 0) error 1
|
|
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8060cec0, 0) error 1
|
|
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8060cf70, 0) error 1
|
|
random: <Software, Yarrow> initialized
|
|
module_register_init: MOD_LOAD (vesa, 0xffffffff80fc4880, 0) error 19
|
|
kbd0 at kbdmux0
|
|
cryptosoft0: <software crypto> on motherboard
|
|
padlock0: No ACE support.
|
|
acpi0: <CORE COREBOOT> on motherboard
|
|
acpi0: Power Button (fixed)
|
|
cpu0: <ACPI CPU> on acpi0
|
|
cpu1: <ACPI CPU> on acpi0
|
|
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
|
|
Event timer "RTC" frequency 32768 Hz quality 0
|
|
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
|
|
Timecounter "i8254" frequency 1193182 Hz quality 0
|
|
Event timer "i8254" frequency 1193182 Hz quality 100
|
|
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
Timecounter "HPET" frequency 14318180 Hz quality 950
|
|
Event timer "HPET" frequency 14318180 Hz quality 550
|
|
Event timer "HPET1" frequency 14318180 Hz quality 450
|
|
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
|
|
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
|
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
pci0: <ACPI PCI bus> on pcib0
|
|
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
|
|
pci1: <ACPI PCI bus> on pcib1
|
|
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1
|
|
re0: Using 1 MSI-X message
|
|
re0: ASPM disabled
|
|
re0: Chip rev. 0x2c000000
|
|
re0: MAC rev. 0x00200000
|
|
miibus0: <MII bus> on re0
|
|
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
|
|
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
|
|
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
|
|
pci2: <ACPI PCI bus> on pcib2
|
|
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2
|
|
re1: Using 1 MSI-X message
|
|
re1: ASPM disabled
|
|
re1: Chip rev. 0x2c000000
|
|
re1: MAC rev. 0x00200000
|
|
miibus1: <MII bus> on re1
|
|
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
|
|
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
|
|
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
|
|
pci3: <ACPI PCI bus> on pcib3
|
|
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3
|
|
re2: Using 1 MSI-X message
|
|
re2: ASPM disabled
|
|
re2: Chip rev. 0x2c000000
|
|
re2: MAC rev. 0x00200000
|
|
miibus2: <MII bus> on re2
|
|
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
|
|
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
|
|
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f08000-0xf7f083ff irq 19 at device 17.0 on pci0
|
|
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
|
|
ahcich0: <AHCI channel> at channel 0 on ahci0
|
|
ahcich1: <AHCI channel> at channel 1 on ahci0
|
|
ahcich2: <AHCI channel> at channel 2 on ahci0
|
|
ahcich3: <AHCI channel> at channel 3 on ahci0
|
|
ahcich4: <AHCI channel> at channel 4 on ahci0
|
|
ahcich5: <AHCI channel> at channel 5 on ahci0
|
|
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f04000-0xf7f04fff irq 18 at device 18.0 on pci0
|
|
usbus0 on ohci0
|
|
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f08400-0xf7f084ff irq 17 at device 18.2 on pci0
|
|
usbus1: EHCI version 1.0
|
|
usbus1 on ehci0
|
|
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f05000-0xf7f05fff irq 18 at device 19.0 on pci0
|
|
usbus2 on ohci1
|
|
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f08500-0xf7f085ff irq 17 at device 19.2 on pci0
|
|
usbus3: EHCI version 1.0
|
|
usbus3 on ehci1
|
|
isab0: <PCI-ISA bridge> at device 20.3 on pci0
|
|
isa0: <ISA bus> on isab0
|
|
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
|
|
pci4: <ACPI PCI bus> on pcib4
|
|
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f06000-0xf7f06fff irq 18 at device 20.5 on pci0
|
|
usbus4 on ohci2
|
|
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
|
|
pci5: <ACPI PCI bus> on pcib5
|
|
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f07000-0xf7f07fff at device 22.0 on pci0
|
|
usbus5 on ohci3
|
|
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f08600-0xf7f086ff at device 22.2 on pci0
|
|
usbus6: EHCI version 1.0
|
|
usbus6 on ehci2
|
|
acpi_button0: <Power Button> on acpi0
|
|
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff on isa0
|
|
gpioapu0: Environment returned APU
|
|
gpioapu0: Address on reg 0x24 is 0xfed80000/4275568640
|
|
gpioapu0 at iomem 0xfed80100-0xfed801ff on isa0
|
|
ppc0: cannot reserve I/O port range
|
|
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
|
|
uart0: console (115200,n,8,1)
|
|
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
|
|
acpi_throttle0: <ACPI CPU Throttling> on cpu0
|
|
acpi_throttle1: <ACPI CPU Throttling> on cpu1
|
|
acpi_throttle1: failed to attach P_CNT
|
|
device_attach: acpi_throttle1 attach returned 6
|
|
Timecounters tick every 1.000 msec
|
|
IPsec: Initialized Security Association Processing.
|
|
random: unblocking device.
|
|
usbus0: 12Mbps Full Speed USB v1.0
|
|
usbus1: 480Mbps High Speed USB v2.0
|
|
usbus2: 12Mbps Full Speed USB v1.0
|
|
usbus3: 480Mbps High Speed USB v2.0
|
|
ugen0.1: <ATI> at usbus0
|
|
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
|
|
ugen1.1: <ATI> at usbus1
|
|
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
|
|
ugen2.1: <ATI> at usbus2
|
|
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
|
|
ugen3.1: <ATI> at usbus3
|
|
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
|
|
usbus4: 12Mbps Full Speed USB v1.0
|
|
usbus5: 12Mbps Full Speed USB v1.0
|
|
usbus6: 480Mbps High Speed USB v2.0
|
|
ugen4.1: <ATI> at usbus4
|
|
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
|
|
ugen5.1: <ATI> at usbus5
|
|
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
|
|
ugen6.1: <ATI> at usbus6
|
|
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
|
|
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
|
|
ada0: <TS32GMSA340 SVN423b> ATA-9 SATA 2.x device
|
|
ada0: Serial Number 20140612B5129601764F
|
|
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
|
|
ada0: Command Queueing enabled
|
|
ada0: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
|
|
ada0: Previously was known as ad4
|
|
uhub4: 2 ports with 2 removable, self powered
|
|
SMP: AP CPU #1 Launched!
|
|
Timecounter "TSC" frequency 1000019484 Hz quality 800
|
|
uhub0: 5 ports with 5 removable, self powered
|
|
Root mount waiting for: usbus6 usbus5 usbus3 usbus2 usbus1 usbus0
|
|
uhub2: 5 ports with 5 removable, self powered
|
|
uhub5: 4 ports with 4 removable, self powered
|
|
Root mount waiting for: usbus6 usbus3 usbus1
|
|
uhub6: 4 ports with 4 removable, self powered
|
|
uhub1: 5 ports with 5 removable, self powered
|
|
uhub3: 5 ports with 5 removable, self powered
|
|
ugen6.2: <Generic> at usbus6
|
|
umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on usbus6
|
|
Trying to mount root from ufs:/dev/ufs/pfsense1 [ro,sync,noatime]...
|
|
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
|
|
da0: <Multiple Card Reader 1.00> Removable Direct Access SCSI-4 device
|
|
da0: Serial Number 058F63666485
|
|
da0: 40.000MB/s transfers
|
|
da0: Attempt to query device size failed: NOT READY, Medium not present
|
|
da0: quirks=0x2<NO_6_BYTE>
|
|
Configuring crash dumps...
|
|
/dev/ufs/pfsense1: FILE SYSTEM CLEAN; SKIPPING CHECKS
|
|
/dev/ufs/pfsense1: clean, 3317770 free (2146 frags, 414453 blocks, 0.1% fragmentation)
|
|
/dev/ufs/cf: FILE SYSTEM CLEAN; SKIPPING CHECKS
|
|
/dev/ufs/cf: clean, 97249 free (41 frags, 12151 blocks, 0.0% fragmentation)
|
|
Filesystems are clean, continuing...
|
|
Mounting filesystems...
|
|
Setting up memory disks...chown: dialer: illegal group name
|
|
done.
|
|
Disabling APM on /dev/ad4
|
|
|
|
___
|
|
___/ f \
|
|
/ p \___/ Sense
|
|
\___/ \
|
|
\___/
|
|
|
|
Welcome to pfSense 2.2.3-RELEASE ...
|
|
|
|
Creating symlinks......ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
|
|
32-bit compatibility ldconfig path: /usr/lib32
|
|
done.
|
|
Jul 5 15:11:34 system[282]: [ERROR] [pool lighty] cannot get uid for user 'root'
|
|
[ERROR] [pool lighty] cannot get uid for user 'root'
|
|
Jul 5 15:11:34 system[282]: [ERROR] FPM initialization failed
|
|
[ERROR] FPM initialization failed
|
|
fcgicli: Could not connect to server(/var/run/php-fpm.socket).
|
|
Launching the init system... done.
|
|
Initializing...................... done.
|
|
Starting device manager (devd)...
|
|
Warning: chown(): Unable to find uid for root in /etc/inc/config.lib.inc on line 867
|
|
|
|
Warning: chgrp(): Unable to find gid for proxy in /etc/inc/config.lib.inc on line 868
|
|
done.
|
|
Loading configuration......done.
|
|
Updating configuration...done.
|
|
Cleaning backup cache........done.
|
|
Setting up extended sysctls...done.
|
|
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
|
|
Setting timezone...done.
|
|
|
|
Warning: chown(): Unable to find uid for unbound in /etc/inc/unbound.inc on line 46
|
|
|
|
Warning: chgrp(): Unable to find gid for unbound in /etc/inc/unbound.inc on line 47
|
|
Configuring loopback interface...done.
|
|
Starting syslog...done.
|
|
Starting Secure Shell Services...done.
|
|
Setting up polling defaults...done.
|
|
Setting up interfaces microcode...done.
|
|
Configuring loopback interface...done.
|
|
Creating wireless clone interfaces...done.
|
|
Configuring LAGG interfaces...done.
|
|
Configuring VLAN interfaces...done.
|
|
Configuring QinQ interfaces...done.
|
|
Configuring WAN interface...done.
|
|
Configuring LAN interface...done.
|
|
Configuring CARP settings...done.
|
|
Syncing OpenVPN settings...done.
|
|
Configuring firewall......done.
|
|
Starting PFLOG...done.
|
|
Setting up gateway monitors...done.
|
|
Synchronizing user settings...done.
|
|
Starting webConfigurator...done.
|
|
Configuring CRON...done.
|
|
Starting DNS Resolver...done.
|
|
Starting NTP time client...done.
|
|
Starting DHCP service...done.
|
|
Starting DHCPv6 service...done.
|
|
Configuring firewall......done.
|
|
Generating RRD graphs...
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 289
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
|
|
Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935
|
|
done.
|
|
Starting syslog...done.
|
|
Starting CRON... done.
|
|
fcgicli: Could not connect to server(/var/run/php-fpm.socket).
|
|
pfSense (nanobsd) 2.2.3-RELEASE amd64 Tue Jun 23 16:37:42 CDT 2015
|
|
Bootup complete
|
|
|
|
FreeBSD/amd64 (b6d229323d.localdomain) (ttyu0)
|
|
|
|
Password:
|
|
Login incorrect
|
|
login:
|