pfSense

PC Engines APU BIOS build date: Sep  8 2014

Total memory 4096 MB

AMD G-T40E Processor

CPU MHz=1000

Press F10 key now for boot menu:

drive 0x000f2a90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=62533296

Booting from Hard Disk...

1  pfSense

2  pfSense

F6 PXE

Boot:  2

/boot/config: -S115200 -hConsoles: serial port

BIOS drive C: is disk0

BIOS 639kB/3653948kB available memory

FreeBSD/x86 bootstrap loader, Revision 1.1

(root@pfs22-amd64-builder, Tue Jun 23 16:55:52 CDT 2015)

Loading /boot/defaults/loader.conf

/boot/kernel/kernel text=0x1223dd0 data=0x881ae0+0x3576a0 syms=[0x8+0x16f080+0x8+0x16c4cc]

Hit [Enter] to boot immediately, or any other key for command prompt.

Booting [/boot/kernel/kernel]...

KDB: debugger backends: ddb

KDB: current backend: ddb

Copyright (c) 1992-2014 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 10.1-RELEASE-p13 #0 c77d1b2(releng/10.1)-dirty: Tue Jun 23 17:00:47 CDT 2015

    root@pfs22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64

FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512

CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)

  Origin = "AuthenticAMD"  Id = 0x500f20  Family = 0x14  Model = 0x2  Stepping = 0

  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>

  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>

  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>

  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>

  TSC: P-state invariant, performance statistics

real memory  = 4815060992 (4592 MB)

avail memory = 4080549888 (3891 MB)

Event timer "LAPIC" quality 400

ACPI APIC Table: <CORE   COREBOOT>

FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs

FreeBSD/SMP: 1 package(s) x 2 core(s)

 cpu0 (BSP): APIC ID:  0

 cpu1 (AP): APIC ID:  1

random device not loaded; using insecure entropy

ioapic0 <Version 2.1> irqs 0-23 on motherboard

iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.

iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806345e0, 0) error 1

iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.

iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80634690, 0) error 1

iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.

iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80634740, 0) error 1

wlan: mac acl policy registered

ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.

ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8060ce10, 0) error 1

ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.

ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8060cec0, 0) error 1

ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.

ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8060cf70, 0) error 1

random: <Software, Yarrow> initialized

module_register_init: MOD_LOAD (vesa, 0xffffffff80fc4880, 0) error 19

kbd0 at kbdmux0

cryptosoft0: <software crypto> on motherboard

padlock0: No ACE support.

acpi0: <CORE COREBOOT> on motherboard

acpi0: Power Button (fixed)

cpu0: <ACPI CPU> on acpi0

cpu1: <ACPI CPU> on acpi0

atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0

Event timer "RTC" frequency 32768 Hz quality 0

attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0

Timecounter "i8254" frequency 1193182 Hz quality 0

Event timer "i8254" frequency 1193182 Hz quality 100

hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0

Timecounter "HPET" frequency 14318180 Hz quality 950

Event timer "HPET" frequency 14318180 Hz quality 550

Event timer "HPET1" frequency 14318180 Hz quality 450

Timecounter "ACPI-fast" frequency 3579545 Hz quality 900

acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0

pci0: <ACPI PCI bus> on pcib0

pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0

pci1: <ACPI PCI bus> on pcib1

re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1

re0: Using 1 MSI-X message

re0: ASPM disabled

re0: Chip rev. 0x2c000000

re0: MAC rev. 0x00200000

miibus0: <MII bus> on re0

rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0

rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow

pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0

pci2: <ACPI PCI bus> on pcib2

re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2

re1: Using 1 MSI-X message

re1: ASPM disabled

re1: Chip rev. 0x2c000000

re1: MAC rev. 0x00200000

miibus1: <MII bus> on re1

rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1

rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow

pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0

pci3: <ACPI PCI bus> on pcib3

re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3

re2: Using 1 MSI-X message

re2: ASPM disabled

re2: Chip rev. 0x2c000000

re2: MAC rev. 0x00200000

miibus2: <MII bus> on re2

rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2

rgephy2:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow

ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f08000-0xf7f083ff irq 19 at device 17.0 on pci0

ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported

ahcich0: <AHCI channel> at channel 0 on ahci0

ahcich1: <AHCI channel> at channel 1 on ahci0

ahcich2: <AHCI channel> at channel 2 on ahci0

ahcich3: <AHCI channel> at channel 3 on ahci0

ahcich4: <AHCI channel> at channel 4 on ahci0

ahcich5: <AHCI channel> at channel 5 on ahci0

ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f04000-0xf7f04fff irq 18 at device 18.0 on pci0

usbus0 on ohci0

ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f08400-0xf7f084ff irq 17 at device 18.2 on pci0

usbus1: EHCI version 1.0

usbus1 on ehci0

ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f05000-0xf7f05fff irq 18 at device 19.0 on pci0

usbus2 on ohci1

ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f08500-0xf7f085ff irq 17 at device 19.2 on pci0

usbus3: EHCI version 1.0

usbus3 on ehci1

isab0: <PCI-ISA bridge> at device 20.3 on pci0

isa0: <ISA bus> on isab0

pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0

pci4: <ACPI PCI bus> on pcib4

ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f06000-0xf7f06fff irq 18 at device 20.5 on pci0

usbus4 on ohci2

pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0

pci5: <ACPI PCI bus> on pcib5

ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f07000-0xf7f07fff at device 22.0 on pci0

usbus5 on ohci3

ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f08600-0xf7f086ff at device 22.2 on pci0

usbus6: EHCI version 1.0

usbus6 on ehci2

acpi_button0: <Power Button> on acpi0

orm0: <ISA Option ROM> at iomem 0xee800-0xeffff on isa0

gpioapu0: Environment returned APU

gpioapu0: Address on reg 0x24 is 0xfed80000/4275568640

gpioapu0 at iomem 0xfed80100-0xfed801ff on isa0

ppc0: cannot reserve I/O port range

uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0

uart0: console (115200,n,8,1)

uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0

acpi_throttle0: <ACPI CPU Throttling> on cpu0

acpi_throttle1: <ACPI CPU Throttling> on cpu1

acpi_throttle1: failed to attach P_CNT

device_attach: acpi_throttle1 attach returned 6

Timecounters tick every 1.000 msec

IPsec: Initialized Security Association Processing.

random: unblocking device.

usbus0: 12Mbps Full Speed USB v1.0

usbus1: 480Mbps High Speed USB v2.0

usbus2: 12Mbps Full Speed USB v1.0

usbus3: 480Mbps High Speed USB v2.0

ugen0.1: <ATI> at usbus0

uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0

ugen1.1: <ATI> at usbus1

uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1

ugen2.1: <ATI> at usbus2

uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2

ugen3.1: <ATI> at usbus3

uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3

usbus4: 12Mbps Full Speed USB v1.0

usbus5: 12Mbps Full Speed USB v1.0

usbus6: 480Mbps High Speed USB v2.0

ugen4.1: <ATI> at usbus4

uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4

ugen5.1: <ATI> at usbus5

uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5

ugen6.1: <ATI> at usbus6

uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6

ada0 at ahcich0 bus 0 scbus0 target 0 lun 0

ada0: <TS32GMSA340 SVN423b> ATA-9 SATA 2.x device

ada0: Serial Number 20140612B5129601764F

ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)

ada0: Command Queueing enabled

ada0: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)

ada0: Previously was known as ad4

uhub4: 2 ports with 2 removable, self powered

SMP: AP CPU #1 Launched!

Timecounter "TSC" frequency 1000019484 Hz quality 800

uhub0: 5 ports with 5 removable, self powered

Root mount waiting for: usbus6 usbus5 usbus3 usbus2 usbus1 usbus0

uhub2: 5 ports with 5 removable, self powered

uhub5: 4 ports with 4 removable, self powered

Root mount waiting for: usbus6 usbus3 usbus1

uhub6: 4 ports with 4 removable, self powered

uhub1: 5 ports with 5 removable, self powered

uhub3: 5 ports with 5 removable, self powered

ugen6.2: <Generic> at usbus6

umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on usbus6

Trying to mount root from ufs:/dev/ufs/pfsense1 [ro,sync,noatime]...

da0 at umass-sim0 bus 0 scbus6 target 0 lun 0

da0: <Multiple Card  Reader 1.00> Removable Direct Access SCSI-4 device

da0: Serial Number 058F63666485

da0: 40.000MB/s transfers

da0: Attempt to query device size failed: NOT READY, Medium not present

da0: quirks=0x2<NO_6_BYTE>

Configuring crash dumps...

/dev/ufs/pfsense1: FILE SYSTEM CLEAN; SKIPPING CHECKS

/dev/ufs/pfsense1: clean, 3317770 free (2146 frags, 414453 blocks, 0.1% fragmentation)

/dev/ufs/cf: FILE SYSTEM CLEAN; SKIPPING CHECKS

/dev/ufs/cf: clean, 97249 free (41 frags, 12151 blocks, 0.0% fragmentation)

Filesystems are clean, continuing...

Mounting filesystems...

Setting up memory disks...chown: dialer: illegal group name

 done.

Disabling APM on /dev/ad4

     ___

 ___/ f \

/ p \___/ Sense

\___/   \

    \___/

Welcome to pfSense 2.2.3-RELEASE  ...

Creating symlinks......ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib

32-bit compatibility ldconfig path: /usr/lib32

done.

Jul  5 15:11:34 system[282]: [ERROR] [pool lighty] cannot get uid for user 'root'

[ERROR] [pool lighty] cannot get uid for user 'root'

Jul  5 15:11:34 system[282]: [ERROR] FPM initialization failed

[ERROR] FPM initialization failed

fcgicli: Could not connect to server(/var/run/php-fpm.socket).

Launching the init system... done.

Initializing...................... done.

Starting device manager (devd)...

Warning: chown(): Unable to find uid for root in /etc/inc/config.lib.inc on line 867

Warning: chgrp(): Unable to find gid for proxy in /etc/inc/config.lib.inc on line 868

done.

Loading configuration......done.

Updating configuration...done.

Cleaning backup cache........done.

Setting up extended sysctls...done.

amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4

Setting timezone...done.

Warning: chown(): Unable to find uid for unbound in /etc/inc/unbound.inc on line 46

Warning: chgrp(): Unable to find gid for unbound in /etc/inc/unbound.inc on line 47

Configuring loopback interface...done.

Starting syslog...done.

Starting Secure Shell Services...done.

Setting up polling defaults...done.

Setting up interfaces microcode...done.

Configuring loopback interface...done.

Creating wireless clone interfaces...done.

Configuring LAGG interfaces...done.

Configuring VLAN interfaces...done.

Configuring QinQ interfaces...done.

Configuring WAN interface...done.

Configuring LAN interface...done.

Configuring CARP settings...done.

Syncing OpenVPN settings...done.

Configuring firewall......done.

Starting PFLOG...done.

Setting up gateway monitors...done.

Synchronizing user settings...done.

Starting webConfigurator...done.

Configuring CRON...done.

Starting DNS Resolver...done.

Starting NTP time client...done.

Starting DHCP service...done.

Starting DHCPv6 service...done.

Configuring firewall......done.

Generating RRD graphs...

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 289

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

Warning: chown(): Unable to find uid for nobody in /etc/inc/rrd.inc on line 935

done.

Starting syslog...done.

Starting CRON... done.

fcgicli: Could not connect to server(/var/run/php-fpm.socket).

pfSense (nanobsd) 2.2.3-RELEASE amd64 Tue Jun 23 16:37:42 CDT 2015

Bootup complete

FreeBSD/amd64 (b6d229323d.localdomain) (ttyu0)

Password:

Login incorrect

login: