Project

General

Profile

Bug #5260 ยป pfSense-23-nanoBSD-upgrade-2015-10-06.txt

Phillip Davis, 10/06/2015 12:57 AM

 
1
FreeBSD/amd64 (Test-rt-01.abc.example.com) (ttyu0)
2

    
3
*** Welcome to pfSense 2.3-ALPHA-nanobsd (amd64) on Test-rt-01 ***
4

    
5
 WAN (wan)       -> re1        -> v4/DHCP4: 10.49.209.3/22
6
 LAN (lan)       -> re2        -> v4: 10.49.64.250/22
7
 OPT1 (opt1)     -> re0        -> v4: 10.49.68.250/22
8

    
9
 0) Logout (SSH only)                  9) pfTop
10
 1) Assign Interfaces                 10) Filter Logs
11
 2) Set interface(s) IP address       11) Restart webConfigurator
12
 3) Reset webConfigurator password    12) pfSense Developer Shell
13
 4) Reset to factory defaults         13) Upgrade from console
14
 5) Reboot system                     14) Disable Secure Shell (sshd)
15
 6) Halt system                       15) Restore recent configuration
16
 7) Ping host                         16) Restart PHP-FPM
17
 8) Shell
18

    
19

    
20
Enter an option: 13
21

    
22
>>> Updating repositories... done.
23
>>> Unlocking kernel package... done.
24
The following 3 package(s) will be affected (of 0 checked):
25

    
26
Installed packages to be UPGRADED:
27
        pfSense-kernel-pfSense: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
28
        pfSense-default-config-serial: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
29
        pfSense-base-nanobsd: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
30

    
31
The operation will free 210 B.
32
38 MiB to be downloaded.
33

    
34
Proceed with upgrade? (y/N) y
35
>>> Downloading packages...
36
Checking for upgrades (4 candidates): .... done
37
Processing candidates (4 candidates): .... done
38
The following 3 package(s) will be affected (of 0 checked):
39

    
40
Installed packages to be UPGRADED:
41
        pfSense-kernel-pfSense: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
42
        pfSense-default-config-serial: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
43
        pfSense-base-nanobsd: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
44

    
45
The operation will free 210 B.
46
38 MiB to be downloaded.
47
Fetching pfSense-kernel-pfSense-2.3.a.20151005.1844.txz: .......... done
48
Fetching pfSense-default-config-serial-2.3.a.20151005.1844.txz: . done
49
Fetching pfSense-base-nanobsd-2.3.a.20151005.1844.txz: .......... done
50
Checking integrity... done (0 conflicting)
51
>>> Upgrading pfSense kernel...
52
Checking integrity... done (0 conflicting)
53
The following 1 package(s) will be affected (of 0 checked):
54

    
55
Installed packages to be UPGRADED:
56
        pfSense-kernel-pfSense: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
57

    
58
The operation will free 3 B.
59
[1/1] Upgrading pfSense-kernel-pfSense from 2.3.a.20151003.0006 to 2.3.a.20151005.1844...
60
===> Keeping a copy of current kernel in /boot/kernel.old
61
[1/1] Extracting pfSense-kernel-pfSense-2.3.a.20151005.1844: .......... done
62
Rebooting...
63
>>> Locking kernel package... done.
64
*** Welcome to pfSense 2.3-ALPHA-nanobsd (amd64) on Test-rt-01 ***
65

    
66
 WAN (wan)       -> re1        -> v4/DHCP4: 10.49.209.3/22
67
 LAN (lan)       -> re2        -> v4: 10.49.64.250/22
68
 OPT1 (opt1)     -> re0        -> v4: 10.49.68.250/22
69

    
70
 0) Logout (SSH only)                  9) pfTop
71
 1) Assign Interfaces                 10) Filter Logs
72
 2) Set interface(s) IP address       11) Restart webConfigurator
73
 3) Reset webConfigurator password    12) pfSense Developer Shell
74
 4) Reset to factory defaults         13) Upgrade from console
75
 5) Reboot system                     14) Disable Secure Shell (sshd)
76
 6) Halt system                       15) Restore recent configuration
77
 7) Ping host                         16) Restart PHP-FPM
78
 8) Shell
79

    
80

    
81
Enter an option: Shutdown NOW!
82
shutdown: [pid 52428]
83

    
84
*** FINAL System shutdown message from root@Test-rt-01.abc.example.com ***
85

    
86
System going down IMMEDIATELY
87

    
88

    
89

    
90
System shutdown time has arrived
91

    
92
pfSense is now shutting down ...
93

    
94
Oct  6 09:40:57 lighttpd[33212]: (server.c.1567) server stopped by UID = 0 PID = 1
95
ovpnc1: link state changed to DOWN
96
ovpnc4: link state changed to DOWN
97
Waiting (max 60 seconds) for system process `vnlru' to stop...done
98
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
99
Waiting (max 60 seconds) for system process `syncer' to stop...
100
Syncing disks, vnodes remaining...0 0 0 done
101
All buffers synced.
102
Uptime: 2d0h43m24s
103
PC Engines APU BIOS build date: Apr  5 2014
104
Reading data from file [bootorder]
105
SeaBIOS (version ?-20140405_120742-frink)
106
SeaBIOS (version ?-20140405_120742-frink)
107
Found coreboot cbmem console @ 7e150400
108
Found mainboard PC Engines APU
109
Relocating init from 0x000e8e71 to 0x7e1065e0 (size 39259)
110
Found CBFS header at 0xfffffb90
111
found file "bootorder" in cbmem
112
CPU Mhz=1001
113
Found 27 PCI devices (max PCI bus is 05)
114
Copying PIR from 0x7e160400 to 0x000f27a0
115
Copying MPTABLE from 0x7e161400/7e161410 to 0x000f25b0 with length 1ec
116
Copying ACPI RSDP from 0x7e162400 to 0x000f2590
117
Copying SMBIOS entry point from 0x7e16d800 to 0x000f2570
118
Using pmtimer, ioport 0x808
119
Scan for VGA option rom
120
EHCI init on dev 00:12.2 (regs=0xf7f04420)
121
Found 1 lpt ports
122
Found 2 serial ports
123
AHCI controller at 11.0, iobase f7f04000, irq 11
124
EHCI init on dev 00:13.2 (regs=0xf7f04520)
125
EHCI init on dev 00:16.2 (regs=0xf7f04620)
126
Searching bootorder for: /rom@img/setup
127
Searching bootorder for: /rom@img/memtest
128
OHCI init on dev 00:12.0 (regs=0xf7f00000)
129
OHCI init on dev 00:13.0 (regs=0xf7f01000)
130
OHCI init on dev 00:14.5 (regs=0xf7f02000)
131
OHCI init on dev 00:16.0 (regs=0xf7f03000)
132
Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
133
Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
134
USB MSC vendor='Multiple' product='Card  Reader' rev='1.00' type=0 removable=1
135
USB MSC blksize=512 sectors=15523840
136
All threads complete.
137
Scan for option roms
138
Running option rom at c000:0003
139

    
140

    
141
iPXE (http://ipxe.org) 00:00.0 C000 PCI2.10 PnP PMMpmm call arg1=1
142
pmm call arg1=0
143
+7E0DA5C0pmm call arg1=1
144
pmm call arg1=0
145
+7E03A5C0 C000
146

    
147

    
148

    
149
Searching bootorder for: /rom@genroms/pxeboot.rom
150

    
151
Build date: Apr  5 2014
152
System memory size: 2017 MB
153

    
154
Press F12 for boot menu.
155

    
156
Searching bootorder for: HALT
157
drive 0x000f2520: PCHS=0/0/0 translation=lba LCHS=966/255/63 s=15523840
158
Space available for UMB: c1000-ee800, f0000-f2520
159
Returned 245760 bytes of ZoneHigh
160
e820 map has 6 items:
161
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
162
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
163
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
164
  3: 0000000000100000 - 000000007e14c000 = 1 RAM
165
  4: 000000007e14c000 - 000000007f000000 = 2 RESERVED
166
  5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED
167
enter handle_19:
168
  NULL
169
Booting from Hard Disk...
170
Booting from 0000:7c00
171

    
172
1  pfSense
173
2  pfSense
174

    
175
F6 PXE
176
Boot:  1
177
/boot/config: -S115200 -h
178
Consoles: serial port
179
BIOS drive C: is disk0
180
BIOS 639kB/2064688kB available memory
181

    
182
FreeBSD/x86 bootstrap loader, Revision 1.1
183
(root@pfs23-amd64-builder, Sat Oct  3 00:19:21 CDT 2015)
184
Loading /boot/defaults/loader.conf
185
/boot/kernel/kernel text=0x1260340 data=0xab4a70+0x359b00 syms=[0x8+0x173730+0x8+0x1708e4]
186

    
187
Hit [Enter] to boot immediately, or any other key for command prompt.
188
Booting [/boot/kernel/kernel]...
189
KDB: debugger backends: ddb
190
KDB: current backend: ddb
191
Copyright (c) 1992-2015 The FreeBSD Project.
192
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
193
        The Regents of the University of California. All rights reserved.
194
FreeBSD is a registered trademark of The FreeBSD Foundation.
195
FreeBSD 10.2-STABLE #81 8aae621(devel): Mon Oct  5 19:01:54 CDT 2015
196
    root@pfs23-amd64-builder:/usr/home/pfsense/pfsense/tmp/obj/usr/home/pfsense/pfsense/tmp/FreeBSD-src/sys/pfSense amd64
197
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
198
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
199
  Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
200
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
201
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
202
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
203
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
204
  SVM: NP,NRIP,NAsids=8
205
  TSC: P-state invariant, performance statistics
206
real memory  = 2115289088 (2017 MB)
207
avail memory = 2004357120 (1911 MB)
208
Event timer "LAPIC" quality 400
209
ACPI APIC Table: <CORE   COREBOOT>
210
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
211
FreeBSD/SMP: 1 package(s) x 2 core(s)
212
 cpu0 (BSP): APIC ID:  0
213
 cpu1 (AP): APIC ID:  1
214
random device not loaded; using insecure entropy
215
ioapic0 <Version 2.1> irqs 0-23 on motherboard
216
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
217
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
218
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806152e0, 0) error 1
219
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
220
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
221
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80615390, 0) error 1
222
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
223
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
224
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80615440, 0) error 1
225
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
226
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
227
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8063d7f0, 0) error 1
228
wlan: mac acl policy registered
229
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
230
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
231
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8063d8a0, 0) error 1
232
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
233
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
234
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8063d950, 0) error 1
235
random: <Software, Yarrow> initialized
236
kbd0 at kbdmux0
237
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff3900, 0) error 19
238
cryptosoft0: <software crypto> on motherboard
239
padlock0: No ACE support.
240
acpi0: <CORE COREBOOT> on motherboard
241
acpi0: Power Button (fixed)
242
cpu0: <ACPI CPU> on acpi0
243
cpu1: <ACPI CPU> on acpi0
244
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
245
Event timer "RTC" frequency 32768 Hz quality 0
246
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
247
Timecounter "i8254" frequency 1193182 Hz quality 0
248
Event timer "i8254" frequency 1193182 Hz quality 100
249
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
250
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
251
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
252
Timecounter "HPET" frequency 14318180 Hz quality 950
253
Event timer "HPET" frequency 14318180 Hz quality 550
254
Event timer "HPET1" frequency 14318180 Hz quality 450
255
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
256
pci0: <ACPI PCI bus> on pcib0
257
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
258
pci1: <ACPI PCI bus> on pcib1
259
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1
260
re0: Using 1 MSI-X message
261
re0: ASPM disabled
262
re0: Chip rev. 0x2c000000
263
re0: MAC rev. 0x00200000
264
miibus0: <MII bus> on re0
265
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
266
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
267
re0: Using defaults for TSO: 65518/35/2048
268
re0: Ethernet address: 00:0d:b9:33:88:88
269
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
270
pci2: <ACPI PCI bus> on pcib2
271
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2
272
re1: Using 1 MSI-X message
273
re1: ASPM disabled
274
re1: Chip rev. 0x2c000000
275
re1: MAC rev. 0x00200000
276
miibus1: <MII bus> on re1
277
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
278
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
279
re1: Using defaults for TSO: 65518/35/2048
280
re1: Ethernet address: 00:0d:b9:33:88:89
281
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
282
pci3: <ACPI PCI bus> on pcib3
283
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3
284
re2: Using 1 MSI-X message
285
re2: ASPM disabled
286
re2: Chip rev. 0x2c000000
287
re2: MAC rev. 0x00200000
288
miibus2: <MII bus> on re2
289
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
290
rgephy2:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
291
re2: Using defaults for TSO: 65518/35/2048
292
re2: Ethernet address: 00:0d:b9:33:88:8a
293
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f04000-0xf7f043ff irq 19 at device 17.0 on pci0
294
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
295
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
296
ahcich0: <AHCI channel> at channel 0 on ahci0
297
ahcich1: <AHCI channel> at channel 1 on ahci0
298
ahcich2: <AHCI channel> at channel 2 on ahci0
299
ahcich3: <AHCI channel> at channel 3 on ahci0
300
ahcich4: <AHCI channel> at channel 4 on ahci0
301
ahcich5: <AHCI channel> at channel 5 on ahci0
302
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f00000-0xf7f00fff irq 18 at device 18.0 on pci0
303
usbus0 on ohci0
304
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04400-0xf7f044ff irq 17 at device 18.2 on pci0
305
usbus1: EHCI version 1.0
306
usbus1 on ehci0
307
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f01000-0xf7f01fff irq 18 at device 19.0 on pci0
308
usbus2 on ohci1
309
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04500-0xf7f045ff irq 17 at device 19.2 on pci0
310
usbus3: EHCI version 1.0
311
usbus3 on ehci1
312
isab0: <PCI-ISA bridge> at device 20.3 on pci0
313
isa0: <ISA bus> on isab0
314
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
315
pci4: <ACPI PCI bus> on pcib4
316
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f02000-0xf7f02fff irq 18 at device 20.5 on pci0
317
usbus4 on ohci2
318
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
319
pci5: <ACPI PCI bus> on pcib5
320
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f03000-0xf7f03fff at device 22.0 on pci0
321
usbus5 on ohci3
322
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04600-0xf7f046ff at device 22.2 on pci0
323
usbus6: EHCI version 1.0
324
usbus6 on ehci2
325
acpi_button0: <Power Button> on acpi0
326
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff on isa0
327
gpioapu0: Environment returned APU
328
gpioapu0: Address on reg 0x24 is 0xfed80000/4275568640
329
gpioapu0 at iomem 0xfed80100-0xfed801ff on isa0
330
ppc0: cannot reserve I/O port range
331
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
332
uart0: console (115200,n,8,1)
333
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
334
random: unblocking device.
335
usbus0: 12Mbps Full Speed USB v1.0
336
Timecounters tick every 1.000 msec
337
IPsec: Initialized Security Association Processing.
338
usbus1: 480Mbps High Speed USB v2.0
339
usbus2: 12Mbps Full Speed USB v1.0
340
usbus3: 480Mbps High Speed USB v2.0
341
ugen0.1: <ATI> at usbus0
342
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
343
ugen1.1: <ATI> at usbus1
344
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
345
ugen2.1: <ATI> at usbus2
346
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
347
ugen3.1: <ATI> at usbus3
348
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
349
usbus4: 12Mbps Full Speed USB v1.0
350
usbus5: 12Mbps Full Speed USB v1.0
351
usbus6: 480Mbps High Speed USB v2.0
352
ugen4.1: <ATI> at usbus4
353
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
354
ugen5.1: <ATI> at usbus5
355
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
356
ugen6.1: <ATI> at usbus6
357
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
358
uhub4: 2 ports with 2 removable, self powered
359
uhub0: 5 ports with 5 removable, self powered
360
uhub2: 5 ports with 5 removable, self powered
361
uhub5: 4 ports with 4 removable, self powered
362
uhub6: 4 ports with 4 removable, self powered
363
uhub1: 5 ports with 5 removable, self powered
364
uhub3: 5 ports with 5 removable, self powered
365
ugen6.2: <Generic> at usbus6
366
umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on usbus6
367
SMP: AP CPU #1 Launched!
368
Timecounter "TSC" frequency 1000022330 Hz quality 800
369
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
370
da0: <Multiple Card  Reader 1.00> Removable Direct Access SPC-2 SCSI device
371
da0: Serial Number 058F63666485
372
da0: 40.000MB/s transfers
373
da0: 7580MB (15523840 512 byte sectors: 255H 63S/T 966C)
374
da0: quirks=0x2<NO_6_BYTE>
375
Trying to mount root from ufs:/dev/ufs/pfsense0 [ro,sync,noatime]...
376
Configuring crash dumps...
377
/dev/ufs/pfsense0: FILE SYSTEM CLEAN; SKIPPING CHECKS
378
/dev/ufs/pfsense0: clean, 2826407 free (1615 frags, 353099 blocks, 0.0% fragmentation)
379
/dev/ufs/cf: FILE SYSTEM CLEAN; SKIPPING CHECKS
380
/dev/ufs/cf: clean, 94643 free (35 frags, 11826 blocks, 0.0% fragmentation)
381
Filesystems are clean, continuing...
382
Mounting filesystems...
383
Setting up memory disks... done.
384

    
385
     ___
386
 ___/ f \
387
/ p \___/ Sense
388
\___/   \
389
    \___/
390

    
391
Welcome to pfSense 2.3-ALPHA  on the 'nanobsd' platform ...
392

    
393
Creating symlinks......ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
394
32-bit compatibility ldconfig path: /usr/lib32
395
done.
396
Running second stage of upgrade process...
397
Upgrading necessary packages...
398
Checking for upgrades (3 candidates): ... done
399
Processing candidates (3 candidates): ... done
400
Checking integrity... done (0 conflicting)
401
The following 2 package(s) will be affected (of 0 checked):
402

    
403
Installed packages to be UPGRADED:
404
        pfSense-default-config-serial: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
405
        pfSense-base-nanobsd: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
406

    
407
The operation will free 207 B.
408
[1/2] Upgrading pfSense-default-config-serial from 2.3.a.20151003.0006 to 2.3.a.20151005.1844...
409
[1/2] Extracting pfSense-default-config-serial-2.3.a.20151005.1844: .. done
410
[2/2] Upgrading pfSense-base-nanobsd from 2.3.a.20151003.0006 to 2.3.a.20151005.1844...
411
===> Keeping a copy of current version mtree
412
[2/2] Extracting pfSense-base-nanobsd-2.3.a.20151005.1844: .. done
413
===> Removing schg flag from base files
414
===> Extracting new base tarball
415
===> Removing static obsoleted files
416
>>> Removing unnecessary packages... done.
417
>>> Cleanup pkg cache... done.
418
External config loader 1.0 is now starting...
419
Launching the init system...pid 21 (sh), uid 0: exited on signal 11 (core dumped)
420

    
    (1-1/1)