Project

General

Profile

Bug #6099 » igmpproxy_stdout.log

debug log to sdtout - Victor Toni, 04/09/2016 04:37 PM

 
Searching for config file at '/tmp/igmpproxy.conf'
Config: Quick leave mode enabled.
Config: Got a phyint token.
Config: IF: Config for interface bge0_vlan8.
Config: IF: Got upstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 193.158.132.189/32.
Config: IF: Altnet: Parsed altnet to 193.158.132.189/32.
Config: IF: Got altnet token 87.141.128.0/17.
Config: IF: Altnet: Parsed altnet to 87.141.128/17.
Config: IF: Got altnet token 217.237.157.0/24.
Config: IF: Altnet: Parsed altnet to 217.237.157/24.
Config: IF: Got altnet token 217.237.158.0/24.
Config: IF: Altnet: Parsed altnet to 217.237.158/24.
Config: IF: Got altnet token 217.239.36.0/24.
Config: IF: Altnet: Parsed altnet to 217.239.36/24.
Config: IF: Got altnet token 193.158.34.0/23.
Config: IF: Altnet: Parsed altnet to 193.158.34/23.
IF name : bge0_vlan8
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 1
Allowednet ptr : 28814040
Config: Got a phyint token.
Config: IF: Config for interface igb2.
Config: IF: Got downstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 192.168.11.0/24.
Config: IF: Altnet: Parsed altnet to 192.168.11/24.
IF name : igb2
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 2
Allowednet ptr : 288140a0
Config: Got a phyint token.
Config: IF: Config for interface igb0.
Config: IF: Got downstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 10.0.15.0/24.
Config: IF: Altnet: Parsed altnet to 10.0.15/24.
IF name : igb0
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 2
Allowednet ptr : 288140b0
Config: Got a phyint token.
Config: IF: Config for interface pppoe0.
Config: IF: Got disabled token.
IF name : pppoe0
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface igb1.
Config: IF: Got disabled token.
IF name : igb1
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface bge0.
Config: IF: Got disabled token.
IF name : bge0
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface bridge0.
Config: IF: Got disabled token.
IF name : bridge0
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
buildIfVc: Interface igb0 Addr: 10.0.0.1, Flags: 0xffff8943, Network: 10.0/16
buildIfVc: Interface igb2 Addr: 192.168.11.1, Flags: 0xffff8843, Network: 192.168.11/24
buildIfVc: Interface bge0 Addr: 192.168.1.11, Flags: 0xffff8943, Network: 192.168.1/24
buildIfVc: Interface lo0 Addr: 127.0.0.1, Flags: 0xffff8049, Network: 127/8
Found config for igb0
Found config for igb2
Found config for bge0
adding VIF, Ix 0 Fl 0x0 IP 0x0100000a igb0, Threshold: 1, Ratelimit: 0
Network for [igb0] : 10.0/16
Network for [igb0] : 10.0.15/24
adding VIF, Ix 1 Fl 0x0 IP 0x010ba8c0 igb2, Threshold: 1, Ratelimit: 0
Network for [igb2] : 192.168.11/24
Network for [igb2] : 192.168.11/24
adding VIF, Ix 2 Fl 0x0 IP 0x0b01a8c0 bge0, Threshold: 1, Ratelimit: 0
Network for [bge0] : 192.168.1/24
There must be at least 2 Vif's where one is upstream.
(2-2/10)