1
|
Copyright (c) 1992-2020 The FreeBSD Project.
|
2
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
3
|
The Regents of the University of California. All rights reserved.
|
4
|
FreeBSD is a registered trademark of The FreeBSD Foundation.
|
5
|
FreeBSD 11.3-STABLE #236 21cbb70bbd1(RELENG_2_4_5): Tue Mar 24 15:26:53 EDT 2020
|
6
|
root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense amd64
|
7
|
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
|
8
|
VT(efifb): resolution 1280x1024
|
9
|
CPU: Intel(R) Atom(TM) CPU C3758 @ 2.20GHz (2200.07-MHz K8-class CPU)
|
10
|
Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1
|
11
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
12
|
Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
|
13
|
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
|
14
|
AMD Features2=0x101<LAHF,Prefetch>
|
15
|
Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
|
16
|
Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
|
17
|
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
|
18
|
IA32_ARCH_CAPS=0x1<RDCL_NO>
|
19
|
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
|
20
|
TSC: P-state invariant, performance statistics
|
21
|
real memory = 8589934592 (8192 MB)
|
22
|
avail memory = 8181899264 (7802 MB)
|
23
|
Event timer "LAPIC" quality 600
|
24
|
ACPI APIC Table: <INTEL TIANO >
|
25
|
WARNING: L1 data cache covers less APIC IDs than a core
|
26
|
0 < 1
|
27
|
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
|
28
|
FreeBSD/SMP: 1 package(s) x 8 core(s)
|
29
|
ioapic0 <Version 2.0> irqs 0-23 on motherboard
|
30
|
SMP: AP CPU #7 Launched!
|
31
|
SMP: AP CPU #1 Launched!
|
32
|
SMP: AP CPU #2 Launched!
|
33
|
SMP: AP CPU #6 Launched!
|
34
|
SMP: AP CPU #3 Launched!
|
35
|
SMP: AP CPU #5 Launched!
|
36
|
SMP: AP CPU #4 Launched!
|
37
|
Timecounter "TSC-low" frequency 1100035032 Hz quality 1000
|
38
|
random: entropy device external interface
|
39
|
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
|
40
|
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
41
|
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806a2080, 0) error 1
|
42
|
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
|
43
|
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
44
|
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806c9140, 0) error 1
|
45
|
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
|
46
|
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
47
|
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806c91f0, 0) error 1
|
48
|
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
|
49
|
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
50
|
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806c92a0, 0) error 1
|
51
|
wlan: mac acl policy registered
|
52
|
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
|
53
|
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
54
|
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806a1f20, 0) error 1
|
55
|
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
|
56
|
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
57
|
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806a1fd0, 0) error 1
|
58
|
kbd0 at kbdmux0
|
59
|
000.000022 [4213] netmap_init netmap: loaded module
|
60
|
module_register_init: MOD_LOAD (vesa, 0xffffffff812c9960, 0) error 19
|
61
|
random: registering fast source Intel Secure Key RNG
|
62
|
random: fast provider: "Intel Secure Key RNG"
|
63
|
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
|
64
|
nexus0
|
65
|
cryptosoft0: <software crypto> on motherboard
|
66
|
padlock0: No ACE support.
|
67
|
acpi0: <SUPERM SMCI--MB> on motherboard
|
68
|
acpi0: Power Button (fixed)
|
69
|
cpu0: <ACPI CPU> on acpi0
|
70
|
cpu1: <ACPI CPU> on acpi0
|
71
|
cpu2: <ACPI CPU> on acpi0
|
72
|
cpu3: <ACPI CPU> on acpi0
|
73
|
cpu4: <ACPI CPU> on acpi0
|
74
|
cpu5: <ACPI CPU> on acpi0
|
75
|
cpu6: <ACPI CPU> on acpi0
|
76
|
cpu7: <ACPI CPU> on acpi0
|
77
|
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
78
|
Timecounter "HPET" frequency 24000000 Hz quality 950
|
79
|
Event timer "HPET" frequency 24000000 Hz quality 550
|
80
|
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
|
81
|
atrtc0: Warning: Couldn't map I/O.
|
82
|
atrtc0: registered as a time-of-day clock, resolution 1.000000s
|
83
|
Event timer "RTC" frequency 32768 Hz quality 0
|
84
|
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
|
85
|
Timecounter "i8254" frequency 1193182 Hz quality 0
|
86
|
Event timer "i8254" frequency 1193182 Hz quality 100
|
87
|
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
|
88
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
|
89
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
90
|
pcib0: _OSC returned error 0x10
|
91
|
pci0: <ACPI PCI bus> on pcib0
|
92
|
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
|
93
|
pci1: <ACPI PCI bus> on pcib1
|
94
|
pci1: <processor> at device 0.0 (no driver attached)
|
95
|
pcib2: <ACPI PCI-PCI bridge> mem 0xdf440000-0xdf45ffff at device 9.0 on pci0
|
96
|
pci2: <ACPI PCI bus> on pcib2
|
97
|
pcib3: <ACPI PCI-PCI bridge> mem 0xdf420000-0xdf43ffff at device 16.0 on pci0
|
98
|
pci3: <ACPI PCI bus> on pcib3
|
99
|
pcib4: <ACPI PCI-PCI bridge> mem 0xdf400000-0xdf41ffff at device 17.0 on pci0
|
100
|
pci4: <ACPI PCI bus> on pcib4
|
101
|
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
|
102
|
pci5: <ACPI PCI bus> on pcib5
|
103
|
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff at device 0.0 on pci5
|
104
|
ahci0: <Intel Denverton AHCI SATA controller> port 0xe090-0xe097,0xe080-0xe083,0xe040-0xe05f mem 0xdf476000-0xdf477fff,0xdf47d000-0xdf47d0ff,0xdf47c000-0xdf47c7ff at device 19.0 on pci0
|
105
|
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
|
106
|
ahcich0: <AHCI channel> at channel 0 on ahci0
|
107
|
ahcich1: <AHCI channel> at channel 1 on ahci0
|
108
|
ahcich2: <AHCI channel> at channel 2 on ahci0
|
109
|
ahcich3: <AHCI channel> at channel 3 on ahci0
|
110
|
ahcich4: <AHCI channel> at channel 4 on ahci0
|
111
|
ahcich5: <AHCI channel> at channel 5 on ahci0
|
112
|
ahcich6: <AHCI channel> at channel 6 on ahci0
|
113
|
ahcich7: <AHCI channel> at channel 7 on ahci0
|
114
|
ahciem0: <AHCI enclosure management bridge> on ahci0
|
115
|
ahci1: <Intel Denverton AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe020-0xe03f mem 0xdf474000-0xdf475fff,0xdf47b000-0xdf47b0ff,0xdf47a000-0xdf47a7ff at device 20.0 on pci0
|
116
|
ahci1: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported
|
117
|
ahcich11: <AHCI channel> at channel 3 on ahci1
|
118
|
ahcich12: <AHCI channel> at channel 4 on ahci1
|
119
|
ahcich13: <AHCI channel> at channel 5 on ahci1
|
120
|
ahcich14: <AHCI channel> at channel 6 on ahci1
|
121
|
ahciem1: <AHCI enclosure management bridge> on ahci1
|
122
|
xhci0: <Intel Denverton USB 3.0 controller> mem 0xdf460000-0xdf46ffff at device 21.0 on pci0
|
123
|
xhci0: 32 bytes context size, 64-bit DMA
|
124
|
usbus0 on xhci0
|
125
|
usbus0: 5.0Gbps Super Speed USB v3.0
|
126
|
pcib6: <ACPI PCI-PCI bridge> at device 22.0 on pci0
|
127
|
pci6: <ACPI PCI bus> on pcib6
|
128
|
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xddc00000-0xdddfffff,0xdde04000-0xdde07fff at device 0.0 on pci6
|
129
|
ix0: Using MSI-X interrupts with 9 vectors
|
130
|
ix0: Ethernet address: ac:1f:6b:49:64:b4
|
131
|
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
|
132
|
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xdda00000-0xddbfffff,0xdde00000-0xdde03fff at device 0.1 on pci6
|
133
|
ix1: Using MSI-X interrupts with 9 vectors
|
134
|
ix1: Ethernet address: ac:1f:6b:49:64:b5
|
135
|
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
|
136
|
pcib7: <ACPI PCI-PCI bridge> at device 23.0 on pci0
|
137
|
pci7: <ACPI PCI bus> on pcib7
|
138
|
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xdd600000-0xdd7fffff,0xdd804000-0xdd807fff at device 0.0 on pci7
|
139
|
ix2: Using MSI-X interrupts with 9 vectors
|
140
|
ix2: Ethernet address: ac:1f:6b:49:64:b6
|
141
|
ix2: netmap queues/slots: TX 8/2048, RX 8/2048
|
142
|
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xdd400000-0xdd5fffff,0xdd800000-0xdd803fff at device 0.1 on pci7
|
143
|
ix3: Using MSI-X interrupts with 9 vectors
|
144
|
ix3: Ethernet address: ac:1f:6b:49:64:b7
|
145
|
ix3: netmap queues/slots: TX 8/2048, RX 8/2048
|
146
|
pci0: <simple comms> at device 24.0 (no driver attached)
|
147
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
148
|
isa0: <ISA bus> on isab0
|
149
|
pci0: <memory> at device 31.2 (no driver attached)
|
150
|
pci0: <serial bus> at device 31.5 (no driver attached)
|
151
|
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
|
152
|
ppc0: cannot reserve I/O port range
|
153
|
est0: <Enhanced SpeedStep Frequency Control> on cpu0
|
154
|
est1: <Enhanced SpeedStep Frequency Control> on cpu1
|
155
|
est2: <Enhanced SpeedStep Frequency Control> on cpu2
|
156
|
est3: <Enhanced SpeedStep Frequency Control> on cpu3
|
157
|
est4: <Enhanced SpeedStep Frequency Control> on cpu4
|
158
|
est5: <Enhanced SpeedStep Frequency Control> on cpu5
|
159
|
est6: <Enhanced SpeedStep Frequency Control> on cpu6
|
160
|
est7: <Enhanced SpeedStep Frequency Control> on cpu7
|
161
|
ZFS filesystem version: 5
|
162
|
ZFS storage pool version: features support (5000)
|
163
|
Timecounters tick every 1.000 msec
|
164
|
ugen0.1: <0x8086 XHCI root HUB> at usbus0
|
165
|
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
|
166
|
uhub0: 8 ports with 8 removable, self powered
|
167
|
ugen0.2: <American Power Conversion Back-UPS XS 950U FW925.T2 .I USB FWT2> at usbus0
|
168
|
ugen0.3: <Logitech USB Keyboard> at usbus0
|
169
|
ukbd0 on uhub0
|
170
|
ukbd0: <USB Keyboard> on usbus0
|
171
|
kbd1 at ukbd0
|
172
|
uhid0 on uhub0
|
173
|
uhid0: <USB Keyboard> on usbus0
|
174
|
ugen0.4: <vendor 0x05e3 USB2.0 Hub> at usbus0
|
175
|
uhub1 on uhub0
|
176
|
uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 3> on usbus0
|
177
|
uhub1: MTT enabled
|
178
|
uhub1: 4 ports with 4 removable, self powered
|
179
|
ugen0.5: <vendor 0x0557 product 0x7000> at usbus0
|
180
|
uhub2 on uhub1
|
181
|
uhub2: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 4> on usbus0
|
182
|
uhub2: 4 ports with 3 removable, self powered
|
183
|
ugen0.6: <vendor 0x0557 product 0x2419> at usbus0
|
184
|
ukbd1 on uhub2
|
185
|
ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on usbus0
|
186
|
kbd2 at ukbd1
|
187
|
ugen0.7: <vendor 0x05e3 USB2.0 Hub> at usbus0
|
188
|
uhub3 on uhub1
|
189
|
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 6> on usbus0
|
190
|
uhub3: MTT enabled
|
191
|
uhub3: 4 ports with 4 removable, self powered
|
192
|
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
|
193
|
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
|
194
|
ses0: SEMB SES Device
|
195
|
ses1 at ahciem1 bus 0 scbus13 target 0 lun 0
|
196
|
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
|
197
|
ses1: SEMB SES Device
|
198
|
ada0 at ahcich12 bus 0 scbus10 target 0 lun 0
|
199
|
ada0: <KINGSTON SA400S37120G SBFKJ1A3> ACS-3 ATA SATA 3.x device
|
200
|
ada0: Serial Number 50026B76836116DD
|
201
|
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
|
202
|
ada0: Command Queueing enabled
|
203
|
ada0: 114473MB (234441648 512 byte sectors)
|
204
|
ses1: pass1,ada0 in 'Slot 04', SATA Slot: scbus10 target 0
|
205
|
Trying to mount root from zfs:zroot/ROOT/default []...
|
206
|
random: unblocking device.
|
207
|
CPU: Intel(R) Atom(TM) CPU C3758 @ 2.20GHz (2200.07-MHz K8-class CPU)
|
208
|
Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1
|
209
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
210
|
Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
|
211
|
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
|
212
|
AMD Features2=0x101<LAHF,Prefetch>
|
213
|
Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
|
214
|
Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
|
215
|
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
|
216
|
IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO>
|
217
|
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
|
218
|
TSC: P-state invariant, performance statistics
|
219
|
padlock0: No ACE support.
|
220
|
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
|
221
|
lo0: link state changed to UP
|
222
|
ix2: link state changed to UP
|
223
|
tun2: changing name to 'ovpns2'
|
224
|
ovpns2: link state changed to UP
|
225
|
tun1: changing name to 'ovpns1'
|
226
|
ovpns1: link state changed to UP
|
227
|
pflog0: promiscuous mode enabled
|
228
|
ix1: link state changed to UP
|
229
|
ix3: link state changed to UP
|
230
|
ix3: promiscuous mode enabled
|
231
|
ix2: promiscuous mode enabled
|
232
|
ix1: link state changed to DOWN
|
233
|
ugen0.3: <Logitech USB Keyboard> at usbus0 (disconnected)
|
234
|
ukbd0: at uhub0, port 2, addr 2 (disconnected)
|
235
|
ukbd0: detached
|
236
|
uhid0: at uhub0, port 2, addr 2 (disconnected)
|
237
|
uhid0: detached
|