|
1
|
Waiting (max 60 seconds) for system process `vnlru' to stop...done
|
|
2
|
Waiting (max 60 seconds) for system process `syncer' to stop...
|
|
3
|
Syncing disks, vnodes remaining...0 0 0 0 done
|
|
4
|
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
|
|
5
|
All buffers synced.
|
|
6
|
Copyright (c) 1992-2010 The FreeBSD Project.
|
|
7
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
8
|
The Regents of the University of California. All rights reserved.
|
|
9
|
FreeBSD is a registered trademark of The FreeBSD Foundation.
|
|
10
|
FreeBSD 8.1-RELEASE-p2 #0: Sun Apr 17 03:58:12 EDT 2011
|
|
11
|
sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
|
|
12
|
Timecounter "i8254" frequency 1193182 Hz quality 0
|
|
13
|
CPU: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (2493.74-MHz 686-class CPU)
|
|
14
|
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6
|
|
15
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
16
|
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
|
|
17
|
AMD Features=0x20100000<NX,LM>
|
|
18
|
AMD Features2=0x1<LAHF>
|
|
19
|
TSC: P-state invariant
|
|
20
|
real memory = 4294967296 (4096 MB)
|
|
21
|
avail memory = 3101794304 (2958 MB)
|
|
22
|
ACPI APIC Table: <LENOVO TC-5H >
|
|
23
|
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
|
|
24
|
FreeBSD/SMP: 1 package(s) x 2 core(s)
|
|
25
|
cpu0 (BSP): APIC ID: 0
|
|
26
|
cpu1 (AP): APIC ID: 1
|
|
27
|
ioapic0 <Version 2.0> irqs 0-23 on motherboard
|
|
28
|
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
|
|
29
|
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
|
|
30
|
module_register_init: MOD_LOAD (wpi_fw, 0xc09634e0, 0) error 1
|
|
31
|
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
32
|
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
33
|
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc076e540, 0) error 1
|
|
34
|
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
35
|
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
36
|
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc076e600, 0) error 1
|
|
37
|
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
38
|
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
39
|
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc076e6c0, 0) error 1
|
|
40
|
wlan: mac acl policy registered
|
|
41
|
kbd1 at kbdmux0
|
|
42
|
cryptosoft0: <software crypto> on motherboard
|
|
43
|
padlock0: No ACE support.
|
|
44
|
acpi0: <LENOVO TC-5H> on motherboard
|
|
45
|
acpi0: [ITHREAD]
|
|
46
|
acpi0: Power Button (fixed)
|
|
47
|
acpi0: reservation of 0, a0000 (3) failed
|
|
48
|
acpi0: reservation of 100000, bdd00000 (3) failed
|
|
49
|
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
|
|
50
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
|
|
51
|
cpu0: <ACPI CPU> on acpi0
|
|
52
|
ACPI Warning: Incorrect checksum in table [SSDT] - 0xCA, should be 0x8A (20100331/tbutils-354)
|
|
53
|
ACPI Warning: Incorrect checksum in table [OEMB] - 0xE1, should be 0xDC (20100331/tbutils-354)
|
|
54
|
cpu1: <ACPI CPU> on acpi0
|
|
55
|
ACPI Warning: Incorrect checksum in table [SSDT] - 0xC3, should be 0x85 (20100331/tbutils-354)
|
|
56
|
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
57
|
Timecounter "HPET" frequency 14318180 Hz quality 900
|
|
58
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
59
|
pci0: <ACPI PCI bus> on pcib0
|
|
60
|
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
|
|
61
|
agp0: <Intel G41 SVGA controller> on vgapci0
|
|
62
|
agp0: detected 32764k stolen memory
|
|
63
|
agp0: aperture size is 256M
|
|
64
|
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
|
|
65
|
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
|
|
66
|
pci1: <ACPI PCI bus> on pcib1
|
|
67
|
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
|
|
68
|
pci2: <ACPI PCI bus> on pcib2
|
|
69
|
mskc0: <Marvell Yukon 88E8057 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 17 at device 0.0 on pci2
|
|
70
|
msk0: <Marvell Technology Group Ltd. Yukon Ultra 2 Id 0xba Rev 0x00> on mskc0
|
|
71
|
miibus0: <MII bus> on msk0
|
|
72
|
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
|
|
73
|
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
74
|
mskc0: [ITHREAD]
|
|
75
|
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc880-0xc89f irq 23 at device 29.0 on pci0
|
|
76
|
uhci0: [ITHREAD]
|
|
77
|
uhci0: LegSup = 0x2f00
|
|
78
|
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
|
|
79
|
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc800-0xc81f irq 19 at device 29.1 on pci0
|
|
80
|
uhci1: [ITHREAD]
|
|
81
|
uhci1: LegSup = 0x2f00
|
|
82
|
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
|
|
83
|
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc480-0xc49f irq 18 at device 29.2 on pci0
|
|
84
|
uhci2: [ITHREAD]
|
|
85
|
uhci2: LegSup = 0x2f00
|
|
86
|
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
|
|
87
|
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc400-0xc41f irq 16 at device 29.3 on pci0
|
|
88
|
uhci3: [ITHREAD]
|
|
89
|
uhci3: LegSup = 0x2f00
|
|
90
|
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
|
|
91
|
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
|
|
92
|
ehci0: [ITHREAD]
|
|
93
|
usbus4: EHCI version 1.0
|
|
94
|
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
|
|
95
|
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
|
|
96
|
pci3: <ACPI PCI bus> on pcib3
|
|
97
|
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 4.0 on pci3
|
|
98
|
miibus1: <MII bus> on rl0
|
|
99
|
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
|
|
100
|
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
|
101
|
rl0: [ITHREAD]
|
|
102
|
rl1: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xfebff800-0xfebff8ff irq 21 at device 10.0 on pci3
|
|
103
|
miibus2: <MII bus> on rl1
|
|
104
|
rlphy1: <RealTek internal media interface> PHY 0 on miibus2
|
|
105
|
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
|
106
|
rl1: [ITHREAD]
|
|
107
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
|
108
|
isa0: <ISA bus> on isab0
|
|
109
|
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
|
|
110
|
ata0: <ATA channel 0> on atapci0
|
|
111
|
ata0: [ITHREAD]
|
|
112
|
atapci1: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at device 31.2 on pci0
|
|
113
|
atapci1: [ITHREAD]
|
|
114
|
ata2: <ATA channel 0> on atapci1
|
|
115
|
ata2: [ITHREAD]
|
|
116
|
ata3: <ATA channel 1> on atapci1
|
|
117
|
ata3: [ITHREAD]
|
|
118
|
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
|
|
119
|
acpi_button0: <Power Button> on acpi0
|
|
120
|
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
|
|
121
|
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
|
|
122
|
uart0: [FILTER]
|
|
123
|
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
|
|
124
|
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
|
|
125
|
ppc0: FIFO with 16/16/8 bytes threshold
|
|
126
|
ppc0: [ITHREAD]
|
|
127
|
ppbus0: <Parallel port bus> on ppc0
|
|
128
|
plip0: <PLIP network interface> on ppbus0
|
|
129
|
plip0: [ITHREAD]
|
|
130
|
lpt0: <Printer> on ppbus0
|
|
131
|
lpt0: [ITHREAD]
|
|
132
|
lpt0: Interrupt-driven port
|
|
133
|
ppi0: <Parallel I/O> on ppbus0
|
|
134
|
pmtimer0 on isa0
|
|
135
|
orm0: <ISA Option ROM> at iomem 0xcc800-0xcd7ff pnpid ORM0000 on isa0
|
|
136
|
sc0: <System console> at flags 0x100 on isa0
|
|
137
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
138
|
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
139
|
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
|
|
140
|
atkbd0: <AT Keyboard> irq 1 on atkbdc0
|
|
141
|
kbd0 at atkbd0
|
|
142
|
atkbd0: [GIANT-LOCKED]
|
|
143
|
atkbd0: [ITHREAD]
|
|
144
|
est0: <Enhanced SpeedStep Frequency Control> on cpu0
|
|
145
|
p4tcc0: <CPU Frequency Thermal Control> on cpu0
|
|
146
|
est1: <Enhanced SpeedStep Frequency Control> on cpu1
|
|
147
|
p4tcc1: <CPU Frequency Thermal Control> on cpu1
|
|
148
|
Timecounters tick every 1.000 msec
|
|
149
|
IPsec: Initialized Security Association Processing.
|
|
150
|
usbus0: 12Mbps Full Speed USB v1.0
|
|
151
|
usbus1: 12Mbps Full Speed USB v1.0
|
|
152
|
usbus2: 12Mbps Full Speed USB v1.0
|
|
153
|
usbus3: 12Mbps Full Speed USB v1.0
|
|
154
|
usbus4: 480Mbps High Speed USB v2.0
|
|
155
|
ad4: 305245MB <WDC WD3200AAJS-08L7A0 02.03E02> at ata2-master UDMA100 SATA
|
|
156
|
ugen0.1: <Intel> at usbus0
|
|
157
|
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
|
|
158
|
ugen1.1: <Intel> at usbus1
|
|
159
|
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
|
|
160
|
ugen2.1: <Intel> at usbus2
|
|
161
|
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
|
|
162
|
ugen3.1: <Intel> at usbus3
|
|
163
|
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
|
|
164
|
ugen4.1: <Intel> at usbus4
|
|
165
|
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
|
|
166
|
uhub0: 2 ports with 2 removable, self powered
|
|
167
|
uhub1: 2 ports with 2 removable, self powered
|
|
168
|
uhub2: 2 ports with 2 removable, self powered
|
|
169
|
uhub3: 2 ports with 2 removable, self powered
|
|
170
|
acd0: DVDR <HL-DT-STDVD-RAM GH10N/EX02> at ata3-master UDMA100 SATA
|
|
171
|
SMP: AP CPU #1 Launched!
|
|
172
|
uhub4: 8 ports with 8 removable, self powered
|
|
173
|
ugen4.2: <USBest Technology> at usbus4
|
|
174
|
umass0: <USBest Technology USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus4
|
|
175
|
umass0: SCSI over Bulk-Only; quirks = 0x0000
|
|
176
|
Root mount waiting for: usbus4
|
|
177
|
ugen1.2: <vendor 0x04b3> at usbus1
|
|
178
|
ums0: <vendor 0x04b3 product 0x310d, class 0/0, rev 2.00/43.01, addr 2> on usbus1
|
|
179
|
ums0: 3 buttons and [XYZ] coordinates ID=0
|
|
180
|
umass0:0:0:-1: Attached to scbus0
|
|
181
|
Trying to mount root from ufs:/dev/ad4s1a
|
|
182
|
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
|
|
183
|
da0: <FLASH Drive UT_USB20 0.00> Removable Direct Access SCSI-2 device
|
|
184
|
da0: 40.000MB/s transfers
|
|
185
|
da0: 3856MB (7897088 512 byte sectors: 255H 63S/T 491C)
|
|
186
|
ugen1.3: <CHICONY> at usbus1
|
|
187
|
ukbd0: <CHICONY USB NetVista Full Width Keyboard, class 0/0, rev 1.10/1.02, addr 3> on usbus1
|
|
188
|
kbd2 at ukbd0
|
|
189
|
GEOM: da0: geometry does not match label (16h,63s != 255h,63s).
|
|
190
|
GEOM: da0: media size does not match label.
|
|
191
|
ugen4.2: <USBest Technology> at usbus4 (disconnected)
|
|
192
|
umass0: at uhub4, port 5, addr 2 (disconnected)
|
|
193
|
(da0:umass-sim0:0:0:0): lost device
|
|
194
|
(da0:umass-sim0:0:0:0): removing device entry
|
|
195
|
pflog0: promiscuous mode enabled
|
|
196
|
msk0: link state changed to UP
|
|
197
|
rl0: link state changed to UP
|
|
198
|
rl0: link state changed to DOWN
|
|
199
|
msk0: link state changed to DOWN
|
|
200
|
msk0: link state changed to UP
|
|
201
|
msk0: link state changed to DOWN
|
|
202
|
msk0: link state changed to UP
|
|
203
|
msk0: link state changed to DOWN
|
|
204
|
rl1: link state changed to UP
|
|
205
|
pflog0: promiscuous mode disabled
|
|
206
|
Waiting (max 60 seconds) for system process `vnlru' to stop...done
|
|
207
|
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
|
|
208
|
Waiting (max 60 seconds) for system process `syncer' to stop...
|
|
209
|
Syncing disks, vnodes remaining...0 0 0 done
|
|
210
|
All buffers synced.
|
|
211
|
Copyright (c) 1992-2010 The FreeBSD Project.
|
|
212
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
213
|
The Regents of the University of California. All rights reserved.
|
|
214
|
FreeBSD is a registered trademark of The FreeBSD Foundation.
|
|
215
|
FreeBSD 8.1-RELEASE-p2 #0: Sun Apr 17 03:58:12 EDT 2011
|
|
216
|
sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
|
|
217
|
Timecounter "i8254" frequency 1193182 Hz quality 0
|
|
218
|
CPU: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (2493.74-MHz 686-class CPU)
|
|
219
|
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6
|
|
220
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
221
|
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
|
|
222
|
AMD Features=0x20100000<NX,LM>
|
|
223
|
AMD Features2=0x1<LAHF>
|
|
224
|
TSC: P-state invariant
|
|
225
|
real memory = 4294967296 (4096 MB)
|
|
226
|
avail memory = 3101794304 (2958 MB)
|
|
227
|
ACPI APIC Table: <LENOVO TC-5H >
|
|
228
|
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
|
|
229
|
FreeBSD/SMP: 1 package(s) x 2 core(s)
|
|
230
|
cpu0 (BSP): APIC ID: 0
|
|
231
|
cpu1 (AP): APIC ID: 1
|
|
232
|
ioapic0 <Version 2.0> irqs 0-23 on motherboard
|
|
233
|
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
|
|
234
|
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
|
|
235
|
module_register_init: MOD_LOAD (wpi_fw, 0xc09634e0, 0) error 1
|
|
236
|
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
237
|
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
238
|
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc076e540, 0) error 1
|
|
239
|
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
240
|
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
241
|
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc076e600, 0) error 1
|
|
242
|
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
243
|
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
244
|
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc076e6c0, 0) error 1
|
|
245
|
wlan: mac acl policy registered
|
|
246
|
kbd1 at kbdmux0
|
|
247
|
cryptosoft0: <software crypto> on motherboard
|
|
248
|
padlock0: No ACE support.
|
|
249
|
acpi0: <LENOVO TC-5H> on motherboard
|
|
250
|
acpi0: [ITHREAD]
|
|
251
|
acpi0: Power Button (fixed)
|
|
252
|
acpi0: reservation of 0, a0000 (3) failed
|
|
253
|
acpi0: reservation of 100000, bdd00000 (3) failed
|
|
254
|
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
|
|
255
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
|
|
256
|
cpu0: <ACPI CPU> on acpi0
|
|
257
|
ACPI Warning: Incorrect checksum in table [SSDT] - 0xCA, should be 0x8A (20100331/tbutils-354)
|
|
258
|
ACPI Warning: Incorrect checksum in table [OEMB] - 0xE1, should be 0xDC (20100331/tbutils-354)
|
|
259
|
cpu1: <ACPI CPU> on acpi0
|
|
260
|
ACPI Warning: Incorrect checksum in table [SSDT] - 0xC3, should be 0x85 (20100331/tbutils-354)
|
|
261
|
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
262
|
Timecounter "HPET" frequency 14318180 Hz quality 900
|
|
263
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
264
|
pci0: <ACPI PCI bus> on pcib0
|
|
265
|
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
|
|
266
|
agp0: <Intel G41 SVGA controller> on vgapci0
|
|
267
|
agp0: detected 32764k stolen memory
|
|
268
|
agp0: aperture size is 256M
|
|
269
|
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
|
|
270
|
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
|
|
271
|
pci1: <ACPI PCI bus> on pcib1
|
|
272
|
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
|
|
273
|
pci2: <ACPI PCI bus> on pcib2
|
|
274
|
mskc0: <Marvell Yukon 88E8057 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 17 at device 0.0 on pci2
|
|
275
|
msk0: <Marvell Technology Group Ltd. Yukon Ultra 2 Id 0xba Rev 0x00> on mskc0
|
|
276
|
miibus0: <MII bus> on msk0
|
|
277
|
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
|
|
278
|
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
279
|
mskc0: [ITHREAD]
|
|
280
|
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc880-0xc89f irq 23 at device 29.0 on pci0
|
|
281
|
uhci0: [ITHREAD]
|
|
282
|
uhci0: LegSup = 0x2f00
|
|
283
|
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
|
|
284
|
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc800-0xc81f irq 19 at device 29.1 on pci0
|
|
285
|
uhci1: [ITHREAD]
|
|
286
|
uhci1: LegSup = 0x2f00
|
|
287
|
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
|
|
288
|
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc480-0xc49f irq 18 at device 29.2 on pci0
|
|
289
|
uhci2: [ITHREAD]
|
|
290
|
uhci2: LegSup = 0x2f00
|
|
291
|
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
|
|
292
|
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc400-0xc41f irq 16 at device 29.3 on pci0
|
|
293
|
uhci3: [ITHREAD]
|
|
294
|
uhci3: LegSup = 0x2f00
|
|
295
|
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
|
|
296
|
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
|
|
297
|
ehci0: [ITHREAD]
|
|
298
|
usbus4: EHCI version 1.0
|
|
299
|
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
|
|
300
|
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
|
|
301
|
pci3: <ACPI PCI bus> on pcib3
|
|
302
|
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 4.0 on pci3
|
|
303
|
miibus1: <MII bus> on rl0
|
|
304
|
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
|
|
305
|
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
|
306
|
rl0: [ITHREAD]
|
|
307
|
rl1: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xfebff800-0xfebff8ff irq 21 at device 10.0 on pci3
|
|
308
|
miibus2: <MII bus> on rl1
|
|
309
|
rlphy1: <RealTek internal media interface> PHY 0 on miibus2
|
|
310
|
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
|
311
|
rl1: [ITHREAD]
|
|
312
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
|
313
|
isa0: <ISA bus> on isab0
|
|
314
|
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
|
|
315
|
ata0: <ATA channel 0> on atapci0
|
|
316
|
ata0: [ITHREAD]
|
|
317
|
atapci1: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at device 31.2 on pci0
|
|
318
|
atapci1: [ITHREAD]
|
|
319
|
ata2: <ATA channel 0> on atapci1
|
|
320
|
ata2: [ITHREAD]
|
|
321
|
ata3: <ATA channel 1> on atapci1
|
|
322
|
ata3: [ITHREAD]
|
|
323
|
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
|
|
324
|
acpi_button0: <Power Button> on acpi0
|
|
325
|
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
|
|
326
|
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
|
|
327
|
uart0: [FILTER]
|
|
328
|
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
|
|
329
|
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
|
|
330
|
ppc0: FIFO with 16/16/8 bytes threshold
|
|
331
|
ppc0: [ITHREAD]
|
|
332
|
ppbus0: <Parallel port bus> on ppc0
|
|
333
|
plip0: <PLIP network interface> on ppbus0
|
|
334
|
plip0: [ITHREAD]
|
|
335
|
lpt0: <Printer> on ppbus0
|
|
336
|
lpt0: [ITHREAD]
|
|
337
|
lpt0: Interrupt-driven port
|
|
338
|
ppi0: <Parallel I/O> on ppbus0
|
|
339
|
pmtimer0 on isa0
|
|
340
|
orm0: <ISA Option ROM> at iomem 0xcc800-0xcd7ff pnpid ORM0000 on isa0
|
|
341
|
sc0: <System console> at flags 0x100 on isa0
|
|
342
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
343
|
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
344
|
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
|
|
345
|
atkbd0: <AT Keyboard> irq 1 on atkbdc0
|
|
346
|
kbd0 at atkbd0
|
|
347
|
atkbd0: [GIANT-LOCKED]
|
|
348
|
atkbd0: [ITHREAD]
|
|
349
|
est0: <Enhanced SpeedStep Frequency Control> on cpu0
|
|
350
|
p4tcc0: <CPU Frequency Thermal Control> on cpu0
|
|
351
|
est1: <Enhanced SpeedStep Frequency Control> on cpu1
|
|
352
|
p4tcc1: <CPU Frequency Thermal Control> on cpu1
|
|
353
|
Timecounters tick every 1.000 msec
|
|
354
|
IPsec: Initialized Security Association Processing.
|
|
355
|
usbus0: 12Mbps Full Speed USB v1.0
|
|
356
|
usbus1: 12Mbps Full Speed USB v1.0
|
|
357
|
usbus2: 12Mbps Full Speed USB v1.0
|
|
358
|
usbus3: 12Mbps Full Speed USB v1.0
|
|
359
|
usbus4: 480Mbps High Speed USB v2.0
|
|
360
|
ad4: 305245MB <WDC WD3200AAJS-08L7A0 02.03E02> at ata2-master UDMA100 SATA
|
|
361
|
ugen0.1: <Intel> at usbus0
|
|
362
|
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
|
|
363
|
ugen1.1: <Intel> at usbus1
|
|
364
|
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
|
|
365
|
ugen2.1: <Intel> at usbus2
|
|
366
|
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
|
|
367
|
ugen3.1: <Intel> at usbus3
|
|
368
|
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
|
|
369
|
ugen4.1: <Intel> at usbus4
|
|
370
|
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
|
|
371
|
uhub0: 2 ports with 2 removable, self powered
|
|
372
|
uhub1: 2 ports with 2 removable, self powered
|
|
373
|
uhub2: 2 ports with 2 removable, self powered
|
|
374
|
uhub3: 2 ports with 2 removable, self powered
|
|
375
|
acd0: DVDR <HL-DT-STDVD-RAM GH10N/EX02> at ata3-master UDMA100 SATA
|
|
376
|
SMP: AP CPU #1 Launched!
|
|
377
|
uhub4: 8 ports with 8 removable, self powered
|
|
378
|
Trying to mount root from ufs:/dev/ad4s1a
|
|
379
|
ugen1.2: <vendor 0x04b3> at usbus1
|
|
380
|
ums0: <vendor 0x04b3 product 0x310d, class 0/0, rev 2.00/43.01, addr 2> on usbus1
|
|
381
|
ums0: 3 buttons and [XYZ] coordinates ID=0
|
|
382
|
ugen1.3: <CHICONY> at usbus1
|
|
383
|
ukbd0: <CHICONY USB NetVista Full Width Keyboard, class 0/0, rev 1.10/1.02, addr 3> on usbus1
|
|
384
|
kbd2 at ukbd0
|
|
385
|
pflog0: promiscuous mode enabled
|
|
386
|
rl1: link state changed to UP
|
|
387
|
msk0: link state changed to DOWN
|
|
388
|
pflog0: promiscuous mode disabled
|
|
389
|
Waiting (max 60 seconds) for system process `vnlru' to stop...done
|
|
390
|
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
|
|
391
|
Waiting (max 60 seconds) for system process `syncer' to stop...
|
|
392
|
Syncing disks, vnodes remaining...0 0 0 done
|
|
393
|
All buffers synced.
|
|
394
|
Copyright (c) 1992-2010 The FreeBSD Project.
|
|
395
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
396
|
The Regents of the University of California. All rights reserved.
|
|
397
|
FreeBSD is a registered trademark of The FreeBSD Foundation.
|
|
398
|
FreeBSD 8.1-RELEASE-p2 #0: Sun Apr 17 03:58:12 EDT 2011
|
|
399
|
sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
|
|
400
|
Timecounter "i8254" frequency 1193182 Hz quality 0
|
|
401
|
CPU: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (2493.75-MHz 686-class CPU)
|
|
402
|
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6
|
|
403
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
404
|
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
|
|
405
|
AMD Features=0x20100000<NX,LM>
|
|
406
|
AMD Features2=0x1<LAHF>
|
|
407
|
TSC: P-state invariant
|
|
408
|
real memory = 4294967296 (4096 MB)
|
|
409
|
avail memory = 3101794304 (2958 MB)
|
|
410
|
ACPI APIC Table: <LENOVO TC-5H >
|
|
411
|
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
|
|
412
|
FreeBSD/SMP: 1 package(s) x 2 core(s)
|
|
413
|
cpu0 (BSP): APIC ID: 0
|
|
414
|
cpu1 (AP): APIC ID: 1
|
|
415
|
ioapic0 <Version 2.0> irqs 0-23 on motherboard
|
|
416
|
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
|
|
417
|
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
|
|
418
|
module_register_init: MOD_LOAD (wpi_fw, 0xc09634e0, 0) error 1
|
|
419
|
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
420
|
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
421
|
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc076e540, 0) error 1
|
|
422
|
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
423
|
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
424
|
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc076e600, 0) error 1
|
|
425
|
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
426
|
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
427
|
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc076e6c0, 0) error 1
|
|
428
|
wlan: mac acl policy registered
|
|
429
|
kbd1 at kbdmux0
|
|
430
|
cryptosoft0: <software crypto> on motherboard
|
|
431
|
padlock0: No ACE support.
|
|
432
|
acpi0: <LENOVO TC-5H> on motherboard
|
|
433
|
acpi0: [ITHREAD]
|
|
434
|
acpi0: Power Button (fixed)
|
|
435
|
acpi0: reservation of 0, a0000 (3) failed
|
|
436
|
acpi0: reservation of 100000, bdd00000 (3) failed
|
|
437
|
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
|
|
438
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
|
|
439
|
cpu0: <ACPI CPU> on acpi0
|
|
440
|
ACPI Warning: Incorrect checksum in table [SSDT] - 0xCA, should be 0x8A (20100331/tbutils-354)
|
|
441
|
ACPI Warning: Incorrect checksum in table [OEMB] - 0xE1, should be 0xDC (20100331/tbutils-354)
|
|
442
|
cpu1: <ACPI CPU> on acpi0
|
|
443
|
ACPI Warning: Incorrect checksum in table [SSDT] - 0xC3, should be 0x85 (20100331/tbutils-354)
|
|
444
|
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
445
|
Timecounter "HPET" frequency 14318180 Hz quality 900
|
|
446
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
447
|
pci0: <ACPI PCI bus> on pcib0
|
|
448
|
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
|
|
449
|
agp0: <Intel G41 SVGA controller> on vgapci0
|
|
450
|
agp0: detected 32764k stolen memory
|
|
451
|
agp0: aperture size is 256M
|
|
452
|
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
|
|
453
|
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
|
|
454
|
pci1: <ACPI PCI bus> on pcib1
|
|
455
|
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
|
|
456
|
pci2: <ACPI PCI bus> on pcib2
|
|
457
|
mskc0: <Marvell Yukon 88E8057 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 17 at device 0.0 on pci2
|
|
458
|
msk0: <Marvell Technology Group Ltd. Yukon Ultra 2 Id 0xba Rev 0x00> on mskc0
|
|
459
|
miibus0: <MII bus> on msk0
|
|
460
|
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
|
|
461
|
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
462
|
mskc0: [ITHREAD]
|
|
463
|
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc880-0xc89f irq 23 at device 29.0 on pci0
|
|
464
|
uhci0: [ITHREAD]
|
|
465
|
uhci0: LegSup = 0x2f00
|
|
466
|
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
|
|
467
|
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc800-0xc81f irq 19 at device 29.1 on pci0
|
|
468
|
uhci1: [ITHREAD]
|
|
469
|
uhci1: LegSup = 0x2f00
|
|
470
|
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
|
|
471
|
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc480-0xc49f irq 18 at device 29.2 on pci0
|
|
472
|
uhci2: [ITHREAD]
|
|
473
|
uhci2: LegSup = 0x2f00
|
|
474
|
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
|
|
475
|
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc400-0xc41f irq 16 at device 29.3 on pci0
|
|
476
|
uhci3: [ITHREAD]
|
|
477
|
uhci3: LegSup = 0x2f00
|
|
478
|
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
|
|
479
|
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
|
|
480
|
ehci0: [ITHREAD]
|
|
481
|
usbus4: EHCI version 1.0
|
|
482
|
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
|
|
483
|
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
|
|
484
|
pci3: <ACPI PCI bus> on pcib3
|
|
485
|
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 4.0 on pci3
|
|
486
|
miibus1: <MII bus> on rl0
|
|
487
|
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
|
|
488
|
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
|
489
|
rl0: [ITHREAD]
|
|
490
|
rl1: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xfebff800-0xfebff8ff irq 21 at device 10.0 on pci3
|
|
491
|
miibus2: <MII bus> on rl1
|
|
492
|
rlphy1: <RealTek internal media interface> PHY 0 on miibus2
|
|
493
|
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
|
494
|
rl1: [ITHREAD]
|
|
495
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
|
496
|
isa0: <ISA bus> on isab0
|
|
497
|
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
|
|
498
|
ata0: <ATA channel 0> on atapci0
|
|
499
|
ata0: [ITHREAD]
|
|
500
|
atapci1: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at device 31.2 on pci0
|
|
501
|
atapci1: [ITHREAD]
|
|
502
|
ata2: <ATA channel 0> on atapci1
|
|
503
|
ata2: [ITHREAD]
|
|
504
|
ata3: <ATA channel 1> on atapci1
|
|
505
|
ata3: [ITHREAD]
|
|
506
|
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
|
|
507
|
acpi_button0: <Power Button> on acpi0
|
|
508
|
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
|
|
509
|
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
|
|
510
|
uart0: [FILTER]
|
|
511
|
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
|
|
512
|
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
|
|
513
|
ppc0: FIFO with 16/16/8 bytes threshold
|
|
514
|
ppc0: [ITHREAD]
|
|
515
|
ppbus0: <Parallel port bus> on ppc0
|
|
516
|
plip0: <PLIP network interface> on ppbus0
|
|
517
|
plip0: [ITHREAD]
|
|
518
|
lpt0: <Printer> on ppbus0
|
|
519
|
lpt0: [ITHREAD]
|
|
520
|
lpt0: Interrupt-driven port
|
|
521
|
ppi0: <Parallel I/O> on ppbus0
|
|
522
|
pmtimer0 on isa0
|
|
523
|
orm0: <ISA Option ROM> at iomem 0xcc800-0xcd7ff pnpid ORM0000 on isa0
|
|
524
|
sc0: <System console> at flags 0x100 on isa0
|
|
525
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
526
|
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
527
|
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
|
|
528
|
atkbd0: <AT Keyboard> irq 1 on atkbdc0
|
|
529
|
kbd0 at atkbd0
|
|
530
|
atkbd0: [GIANT-LOCKED]
|
|
531
|
atkbd0: [ITHREAD]
|
|
532
|
est0: <Enhanced SpeedStep Frequency Control> on cpu0
|
|
533
|
p4tcc0: <CPU Frequency Thermal Control> on cpu0
|
|
534
|
est1: <Enhanced SpeedStep Frequency Control> on cpu1
|
|
535
|
p4tcc1: <CPU Frequency Thermal Control> on cpu1
|
|
536
|
Timecounters tick every 1.000 msec
|
|
537
|
IPsec: Initialized Security Association Processing.
|
|
538
|
usbus0: 12Mbps Full Speed USB v1.0
|
|
539
|
usbus1: 12Mbps Full Speed USB v1.0
|
|
540
|
usbus2: 12Mbps Full Speed USB v1.0
|
|
541
|
usbus3: 12Mbps Full Speed USB v1.0
|
|
542
|
usbus4: 480Mbps High Speed USB v2.0
|
|
543
|
ad4: 305245MB <WDC WD3200AAJS-08L7A0 02.03E02> at ata2-master UDMA100 SATA
|
|
544
|
ugen0.1: <Intel> at usbus0
|
|
545
|
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
|
|
546
|
ugen1.1: <Intel> at usbus1
|
|
547
|
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
|
|
548
|
ugen2.1: <Intel> at usbus2
|
|
549
|
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
|
|
550
|
ugen3.1: <Intel> at usbus3
|
|
551
|
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
|
|
552
|
ugen4.1: <Intel> at usbus4
|
|
553
|
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
|
|
554
|
uhub0: 2 ports with 2 removable, self powered
|
|
555
|
uhub1: 2 ports with 2 removable, self powered
|
|
556
|
uhub2: 2 ports with 2 removable, self powered
|
|
557
|
uhub3: 2 ports with 2 removable, self powered
|
|
558
|
acd0: DVDR <HL-DT-STDVD-RAM GH10N/EX02> at ata3-master UDMA100 SATA
|
|
559
|
SMP: AP CPU #1 Launched!
|
|
560
|
uhub4: 8 ports with 8 removable, self powered
|
|
561
|
Trying to mount root from ufs:/dev/ad4s1a
|
|
562
|
ugen1.2: <vendor 0x04b3> at usbus1
|
|
563
|
ums0: <vendor 0x04b3 product 0x310d, class 0/0, rev 2.00/43.01, addr 2> on usbus1
|
|
564
|
ums0: 3 buttons and [XYZ] coordinates ID=0
|
|
565
|
ugen1.3: <CHICONY> at usbus1
|
|
566
|
ukbd0: <CHICONY USB NetVista Full Width Keyboard, class 0/0, rev 1.10/1.02, addr 3> on usbus1
|
|
567
|
kbd2 at ukbd0
|
|
568
|
pflog0: promiscuous mode enabled
|
|
569
|
rl1: link state changed to UP
|
|
570
|
msk0: link state changed to DOWN
|
|
571
|
pflog0: promiscuous mode disabled
|
|
572
|
Waiting (max 60 seconds) for system process `vnlru' to stop...done
|
|
573
|
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
|
|
574
|
Waiting (max 60 seconds) for system process `syncer' to stop...
|
|
575
|
Syncing disks, vnodes remaining...0 0 0 done
|
|
576
|
All buffers synced.
|
|
577
|
Copyright (c) 1992-2010 The FreeBSD Project.
|
|
578
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
579
|
The Regents of the University of California. All rights reserved.
|
|
580
|
FreeBSD is a registered trademark of The FreeBSD Foundation.
|
|
581
|
FreeBSD 8.1-RELEASE-p2 #0: Sun Apr 17 03:58:12 EDT 2011
|
|
582
|
sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
|
|
583
|
Timecounter "i8254" frequency 1193182 Hz quality 0
|
|
584
|
CPU: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (2493.75-MHz 686-class CPU)
|
|
585
|
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6
|
|
586
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
587
|
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
|
|
588
|
AMD Features=0x20100000<NX,LM>
|
|
589
|
AMD Features2=0x1<LAHF>
|
|
590
|
TSC: P-state invariant
|
|
591
|
real memory = 4294967296 (4096 MB)
|
|
592
|
avail memory = 3101794304 (2958 MB)
|
|
593
|
ACPI APIC Table: <LENOVO TC-5H >
|
|
594
|
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
|
|
595
|
FreeBSD/SMP: 1 package(s) x 2 core(s)
|
|
596
|
cpu0 (BSP): APIC ID: 0
|
|
597
|
cpu1 (AP): APIC ID: 1
|
|
598
|
ioapic0 <Version 2.0> irqs 0-23 on motherboard
|
|
599
|
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
|
|
600
|
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
|
|
601
|
module_register_init: MOD_LOAD (wpi_fw, 0xc09634e0, 0) error 1
|
|
602
|
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
603
|
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
604
|
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc076e540, 0) error 1
|
|
605
|
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
606
|
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
607
|
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc076e600, 0) error 1
|
|
608
|
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
609
|
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
610
|
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc076e6c0, 0) error 1
|
|
611
|
wlan: mac acl policy registered
|
|
612
|
kbd1 at kbdmux0
|
|
613
|
cryptosoft0: <software crypto> on motherboard
|
|
614
|
padlock0: No ACE support.
|
|
615
|
acpi0: <LENOVO TC-5H> on motherboard
|
|
616
|
acpi0: [ITHREAD]
|
|
617
|
acpi0: Power Button (fixed)
|
|
618
|
acpi0: reservation of 0, a0000 (3) failed
|
|
619
|
acpi0: reservation of 100000, bdd00000 (3) failed
|
|
620
|
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
|
|
621
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
|
|
622
|
cpu0: <ACPI CPU> on acpi0
|
|
623
|
ACPI Warning: Incorrect checksum in table [SSDT] - 0xCA, should be 0x8A (20100331/tbutils-354)
|
|
624
|
ACPI Warning: Incorrect checksum in table [OEMB] - 0xE1, should be 0xDC (20100331/tbutils-354)
|
|
625
|
cpu1: <ACPI CPU> on acpi0
|
|
626
|
ACPI Warning: Incorrect checksum in table [SSDT] - 0xC3, should be 0x85 (20100331/tbutils-354)
|
|
627
|
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
628
|
Timecounter "HPET" frequency 14318180 Hz quality 900
|
|
629
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
630
|
pci0: <ACPI PCI bus> on pcib0
|
|
631
|
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
|
|
632
|
agp0: <Intel G41 SVGA controller> on vgapci0
|
|
633
|
agp0: detected 32764k stolen memory
|
|
634
|
agp0: aperture size is 256M
|
|
635
|
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
|
|
636
|
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
|
|
637
|
pci1: <ACPI PCI bus> on pcib1
|
|
638
|
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
|
|
639
|
pci2: <ACPI PCI bus> on pcib2
|
|
640
|
mskc0: <Marvell Yukon 88E8057 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 17 at device 0.0 on pci2
|
|
641
|
msk0: <Marvell Technology Group Ltd. Yukon Ultra 2 Id 0xba Rev 0x00> on mskc0
|
|
642
|
miibus0: <MII bus> on msk0
|
|
643
|
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
|
|
644
|
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
645
|
mskc0: [ITHREAD]
|
|
646
|
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc880-0xc89f irq 23 at device 29.0 on pci0
|
|
647
|
uhci0: [ITHREAD]
|
|
648
|
uhci0: LegSup = 0x2f00
|
|
649
|
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
|
|
650
|
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc800-0xc81f irq 19 at device 29.1 on pci0
|
|
651
|
uhci1: [ITHREAD]
|
|
652
|
uhci1: LegSup = 0x2f00
|
|
653
|
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
|
|
654
|
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc480-0xc49f irq 18 at device 29.2 on pci0
|
|
655
|
uhci2: [ITHREAD]
|
|
656
|
uhci2: LegSup = 0x2f00
|
|
657
|
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
|
|
658
|
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc400-0xc41f irq 16 at device 29.3 on pci0
|
|
659
|
uhci3: [ITHREAD]
|
|
660
|
uhci3: LegSup = 0x2f00
|
|
661
|
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
|
|
662
|
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
|
|
663
|
ehci0: [ITHREAD]
|
|
664
|
usbus4: EHCI version 1.0
|
|
665
|
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
|
|
666
|
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
|
|
667
|
pci3: <ACPI PCI bus> on pcib3
|
|
668
|
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 4.0 on pci3
|
|
669
|
miibus1: <MII bus> on rl0
|
|
670
|
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
|
|
671
|
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
|
672
|
rl0: [ITHREAD]
|
|
673
|
rl1: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xfebff800-0xfebff8ff irq 21 at device 10.0 on pci3
|
|
674
|
miibus2: <MII bus> on rl1
|
|
675
|
rlphy1: <RealTek internal media interface> PHY 0 on miibus2
|
|
676
|
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
|
677
|
rl1: [ITHREAD]
|
|
678
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
|
679
|
isa0: <ISA bus> on isab0
|
|
680
|
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
|
|
681
|
ata0: <ATA channel 0> on atapci0
|
|
682
|
ata0: [ITHREAD]
|
|
683
|
atapci1: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at device 31.2 on pci0
|
|
684
|
atapci1: [ITHREAD]
|
|
685
|
ata2: <ATA channel 0> on atapci1
|
|
686
|
ata2: [ITHREAD]
|
|
687
|
ata3: <ATA channel 1> on atapci1
|
|
688
|
ata3: [ITHREAD]
|
|
689
|
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
|
|
690
|
acpi_button0: <Power Button> on acpi0
|
|
691
|
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
|
|
692
|
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
|
|
693
|
uart0: [FILTER]
|
|
694
|
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
|
|
695
|
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
|
|
696
|
ppc0: FIFO with 16/16/8 bytes threshold
|
|
697
|
ppc0: [ITHREAD]
|
|
698
|
ppbus0: <Parallel port bus> on ppc0
|
|
699
|
plip0: <PLIP network interface> on ppbus0
|
|
700
|
plip0: [ITHREAD]
|
|
701
|
lpt0: <Printer> on ppbus0
|
|
702
|
lpt0: [ITHREAD]
|
|
703
|
lpt0: Interrupt-driven port
|
|
704
|
ppi0: <Parallel I/O> on ppbus0
|
|
705
|
pmtimer0 on isa0
|
|
706
|
orm0: <ISA Option ROM> at iomem 0xcc800-0xcd7ff pnpid ORM0000 on isa0
|
|
707
|
sc0: <System console> at flags 0x100 on isa0
|
|
708
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
709
|
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
710
|
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
|
|
711
|
atkbd0: <AT Keyboard> irq 1 on atkbdc0
|
|
712
|
kbd0 at atkbd0
|
|
713
|
atkbd0: [GIANT-LOCKED]
|
|
714
|
atkbd0: [ITHREAD]
|
|
715
|
est0: <Enhanced SpeedStep Frequency Control> on cpu0
|
|
716
|
p4tcc0: <CPU Frequency Thermal Control> on cpu0
|
|
717
|
est1: <Enhanced SpeedStep Frequency Control> on cpu1
|
|
718
|
p4tcc1: <CPU Frequency Thermal Control> on cpu1
|
|
719
|
Timecounters tick every 1.000 msec
|
|
720
|
IPsec: Initialized Security Association Processing.
|
|
721
|
usbus0: 12Mbps Full Speed USB v1.0
|
|
722
|
usbus1: 12Mbps Full Speed USB v1.0
|
|
723
|
usbus2: 12Mbps Full Speed USB v1.0
|
|
724
|
usbus3: 12Mbps Full Speed USB v1.0
|
|
725
|
usbus4: 480Mbps High Speed USB v2.0
|
|
726
|
ad4: 305245MB <WDC WD3200AAJS-08L7A0 02.03E02> at ata2-master UDMA100 SATA
|
|
727
|
ugen0.1: <Intel> at usbus0
|
|
728
|
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
|
|
729
|
ugen1.1: <Intel> at usbus1
|
|
730
|
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
|
|
731
|
ugen2.1: <Intel> at usbus2
|
|
732
|
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
|
|
733
|
ugen3.1: <Intel> at usbus3
|
|
734
|
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
|
|
735
|
ugen4.1: <Intel> at usbus4
|
|
736
|
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
|
|
737
|
uhub0: 2 ports with 2 removable, self powered
|
|
738
|
uhub1: 2 ports with 2 removable, self powered
|
|
739
|
uhub2: 2 ports with 2 removable, self powered
|
|
740
|
uhub3: 2 ports with 2 removable, self powered
|
|
741
|
acd0: DVDR <HL-DT-STDVD-RAM GH10N/EX02> at ata3-master UDMA100 SATA
|
|
742
|
SMP: AP CPU #1 Launched!
|
|
743
|
uhub4: 8 ports with 8 removable, self powered
|
|
744
|
Trying to mount root from ufs:/dev/ad4s1a
|
|
745
|
ugen1.2: <vendor 0x04b3> at usbus1
|
|
746
|
ums0: <vendor 0x04b3 product 0x310d, class 0/0, rev 2.00/43.01, addr 2> on usbus1
|
|
747
|
ums0: 3 buttons and [XYZ] coordinates ID=0
|
|
748
|
ugen1.3: <CHICONY> at usbus1
|
|
749
|
ukbd0: <CHICONY USB NetVista Full Width Keyboard, class 0/0, rev 1.10/1.02, addr 3> on usbus1
|
|
750
|
kbd2 at ukbd0
|
|
751
|
pflog0: promiscuous mode enabled
|
|
752
|
rl1: link state changed to UP
|
|
753
|
rl1: link state changed to DOWN
|
|
754
|
msk0: link state changed to UP
|
|
755
|
msk0: link state changed to DOWN
|
|
756
|
msk0: link state changed to UP
|
|
757
|
msk0: link state changed to DOWN
|
|
758
|
rl1: link state changed to UP
|