FreeBSD/amd64 (Test-rt-01.abc.example.com) (ttyu0) *** Welcome to pfSense 2.3-ALPHA-nanobsd (amd64) on Test-rt-01 *** WAN (wan) -> re1 -> v4/DHCP4: 10.49.209.3/22 LAN (lan) -> re2 -> v4: 10.49.64.250/22 OPT1 (opt1) -> re0 -> v4: 10.49.68.250/22 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) pfSense Developer Shell 4) Reset to factory defaults 13) Upgrade from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 13 >>> Updating repositories... done. >>> Unlocking kernel package... done. The following 3 package(s) will be affected (of 0 checked): Installed packages to be UPGRADED: pfSense-kernel-pfSense: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core] pfSense-default-config-serial: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core] pfSense-base-nanobsd: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core] The operation will free 210 B. 38 MiB to be downloaded. Proceed with upgrade? (y/N) y >>> Downloading packages... Checking for upgrades (4 candidates): .... done Processing candidates (4 candidates): .... done The following 3 package(s) will be affected (of 0 checked): Installed packages to be UPGRADED: pfSense-kernel-pfSense: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core] pfSense-default-config-serial: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core] pfSense-base-nanobsd: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core] The operation will free 210 B. 38 MiB to be downloaded. Fetching pfSense-kernel-pfSense-2.3.a.20151005.1844.txz: .......... done Fetching pfSense-default-config-serial-2.3.a.20151005.1844.txz: . done Fetching pfSense-base-nanobsd-2.3.a.20151005.1844.txz: .......... done Checking integrity... done (0 conflicting) >>> Upgrading pfSense kernel... Checking integrity... done (0 conflicting) The following 1 package(s) will be affected (of 0 checked): Installed packages to be UPGRADED: pfSense-kernel-pfSense: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core] The operation will free 3 B. [1/1] Upgrading pfSense-kernel-pfSense from 2.3.a.20151003.0006 to 2.3.a.20151005.1844... ===> Keeping a copy of current kernel in /boot/kernel.old [1/1] Extracting pfSense-kernel-pfSense-2.3.a.20151005.1844: .......... done Rebooting... >>> Locking kernel package... done. *** Welcome to pfSense 2.3-ALPHA-nanobsd (amd64) on Test-rt-01 *** WAN (wan) -> re1 -> v4/DHCP4: 10.49.209.3/22 LAN (lan) -> re2 -> v4: 10.49.64.250/22 OPT1 (opt1) -> re0 -> v4: 10.49.68.250/22 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) pfSense Developer Shell 4) Reset to factory defaults 13) Upgrade from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: Shutdown NOW! shutdown: [pid 52428] *** FINAL System shutdown message from root@Test-rt-01.abc.example.com *** System going down IMMEDIATELY System shutdown time has arrived pfSense is now shutting down ... Oct 6 09:40:57 lighttpd[33212]: (server.c.1567) server stopped by UID = 0 PID = 1 ovpnc1: link state changed to DOWN ovpnc4: link state changed to DOWN Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 done All buffers synced. Uptime: 2d0h43m24s PC Engines APU BIOS build date: Apr 5 2014 Reading data from file [bootorder] SeaBIOS (version ?-20140405_120742-frink) SeaBIOS (version ?-20140405_120742-frink) Found coreboot cbmem console @ 7e150400 Found mainboard PC Engines APU Relocating init from 0x000e8e71 to 0x7e1065e0 (size 39259) Found CBFS header at 0xfffffb90 found file "bootorder" in cbmem CPU Mhz=1001 Found 27 PCI devices (max PCI bus is 05) Copying PIR from 0x7e160400 to 0x000f27a0 Copying MPTABLE from 0x7e161400/7e161410 to 0x000f25b0 with length 1ec Copying ACPI RSDP from 0x7e162400 to 0x000f2590 Copying SMBIOS entry point from 0x7e16d800 to 0x000f2570 Using pmtimer, ioport 0x808 Scan for VGA option rom EHCI init on dev 00:12.2 (regs=0xf7f04420) Found 1 lpt ports Found 2 serial ports AHCI controller at 11.0, iobase f7f04000, irq 11 EHCI init on dev 00:13.2 (regs=0xf7f04520) EHCI init on dev 00:16.2 (regs=0xf7f04620) Searching bootorder for: /rom@img/setup Searching bootorder for: /rom@img/memtest OHCI init on dev 00:12.0 (regs=0xf7f00000) OHCI init on dev 00:13.0 (regs=0xf7f01000) OHCI init on dev 00:14.5 (regs=0xf7f02000) OHCI init on dev 00:16.0 (regs=0xf7f03000) Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0 Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1 USB MSC vendor='Multiple' product='Card Reader' rev='1.00' type=0 removable=1 USB MSC blksize=512 sectors=15523840 All threads complete. Scan for option roms Running option rom at c000:0003 iPXE (http://ipxe.org) 00:00.0 C000 PCI2.10 PnP PMMpmm call arg1=1 pmm call arg1=0 +7E0DA5C0pmm call arg1=1 pmm call arg1=0 +7E03A5C0 C000 Searching bootorder for: /rom@genroms/pxeboot.rom Build date: Apr 5 2014 System memory size: 2017 MB Press F12 for boot menu. Searching bootorder for: HALT drive 0x000f2520: PCHS=0/0/0 translation=lba LCHS=966/255/63 s=15523840 Space available for UMB: c1000-ee800, f0000-f2520 Returned 245760 bytes of ZoneHigh e820 map has 6 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 000000007e14c000 = 1 RAM 4: 000000007e14c000 - 000000007f000000 = 2 RESERVED 5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED enter handle_19: NULL Booting from Hard Disk... Booting from 0000:7c00 1 pfSense 2 pfSense F6 PXE Boot: 1 /boot/config: -S115200 -h Consoles: serial port BIOS drive C: is disk0 BIOS 639kB/2064688kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (root@pfs23-amd64-builder, Sat Oct 3 00:19:21 CDT 2015) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x1260340 data=0xab4a70+0x359b00 syms=[0x8+0x173730+0x8+0x1708e4] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.2-STABLE #81 8aae621(devel): Mon Oct 5 19:01:54 CDT 2015 root@pfs23-amd64-builder:/usr/home/pfsense/pfsense/tmp/obj/usr/home/pfsense/pfsense/tmp/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x500f20 Family=0x14 Model=0x2 Stepping=0 Features=0x178bfbff Features2=0x802209 AMD Features=0x2e500800 AMD Features2=0x35ff SVM: NP,NRIP,NAsids=8 TSC: P-state invariant, performance statistics real memory = 2115289088 (2017 MB) avail memory = 2004357120 (1911 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 random device not loaded; using insecure entropy ioapic0 irqs 0-23 on motherboard ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806152e0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80615390, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80615440, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8063d7f0, 0) error 1 wlan: mac acl policy registered iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8063d8a0, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8063d950, 0) error 1 random: initialized kbd0 at kbdmux0 module_register_init: MOD_LOAD (vesa, 0xffffffff80ff3900, 0) error 19 cryptosoft0: on motherboard padlock0: No ACE support. acpi0: on motherboard acpi0: Power Button (fixed) cpu0: on acpi0 cpu1: on acpi0 atrtc0: port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 450 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 4.0 on pci0 pci1: on pcib1 re0: port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00200000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 00:0d:b9:33:88:88 pcib2: irq 17 at device 5.0 on pci0 pci2: on pcib2 re1: port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2 re1: Using 1 MSI-X message re1: ASPM disabled re1: Chip rev. 0x2c000000 re1: MAC rev. 0x00200000 miibus1: on re1 rgephy1: PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Using defaults for TSO: 65518/35/2048 re1: Ethernet address: 00:0d:b9:33:88:89 pcib3: irq 18 at device 6.0 on pci0 pci3: on pcib3 re2: port 0x3000-0x30ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3 re2: Using 1 MSI-X message re2: ASPM disabled re2: Chip rev. 0x2c000000 re2: MAC rev. 0x00200000 miibus2: on re2 rgephy2: PHY 1 on miibus2 rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re2: Using defaults for TSO: 65518/35/2048 re2: Ethernet address: 00:0d:b9:33:88:8a ahci0: port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f04000-0xf7f043ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported ahci0: quirks=0x22000 ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich2: at channel 2 on ahci0 ahcich3: at channel 3 on ahci0 ahcich4: at channel 4 on ahci0 ahcich5: at channel 5 on ahci0 ohci0: mem 0xf7f00000-0xf7f00fff irq 18 at device 18.0 on pci0 usbus0 on ohci0 ehci0: mem 0xf7f04400-0xf7f044ff irq 17 at device 18.2 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 ohci1: mem 0xf7f01000-0xf7f01fff irq 18 at device 19.0 on pci0 usbus2 on ohci1 ehci1: mem 0xf7f04500-0xf7f045ff irq 17 at device 19.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci1 isab0: at device 20.3 on pci0 isa0: on isab0 pcib4: at device 20.4 on pci0 pci4: on pcib4 ohci2: mem 0xf7f02000-0xf7f02fff irq 18 at device 20.5 on pci0 usbus4 on ohci2 pcib5: at device 21.0 on pci0 pci5: on pcib5 ohci3: mem 0xf7f03000-0xf7f03fff at device 22.0 on pci0 usbus5 on ohci3 ehci2: mem 0xf7f04600-0xf7f046ff at device 22.2 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci2 acpi_button0: on acpi0 orm0: at iomem 0xee800-0xeffff on isa0 gpioapu0: Environment returned APU gpioapu0: Address on reg 0x24 is 0xfed80000/4275568640 gpioapu0 at iomem 0xfed80100-0xfed801ff on isa0 ppc0: cannot reserve I/O port range uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 uhub4: 2 ports with 2 removable, self powered uhub0: 5 ports with 5 removable, self powered uhub2: 5 ports with 5 removable, self powered uhub5: 4 ports with 4 removable, self powered uhub6: 4 ports with 4 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered ugen6.2: at usbus6 umass0: on usbus6 SMP: AP CPU #1 Launched! Timecounter "TSC" frequency 1000022330 Hz quality 800 da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 da0: Removable Direct Access SPC-2 SCSI device da0: Serial Number 058F63666485 da0: 40.000MB/s transfers da0: 7580MB (15523840 512 byte sectors: 255H 63S/T 966C) da0: quirks=0x2 Trying to mount root from ufs:/dev/ufs/pfsense0 [ro,sync,noatime]... Configuring crash dumps... /dev/ufs/pfsense0: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/pfsense0: clean, 2826407 free (1615 frags, 353099 blocks, 0.0% fragmentation) /dev/ufs/cf: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/cf: clean, 94643 free (35 frags, 11826 blocks, 0.0% fragmentation) Filesystems are clean, continuing... Mounting filesystems... Setting up memory disks... done. ___ ___/ f \ / p \___/ Sense \___/ \ \___/ Welcome to pfSense 2.3-ALPHA on the 'nanobsd' platform ... Creating symlinks......ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib 32-bit compatibility ldconfig path: /usr/lib32 done. Running second stage of upgrade process... Upgrading necessary packages... Checking for upgrades (3 candidates): ... done Processing candidates (3 candidates): ... done Checking integrity... done (0 conflicting) The following 2 package(s) will be affected (of 0 checked): Installed packages to be UPGRADED: pfSense-default-config-serial: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core] pfSense-base-nanobsd: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core] The operation will free 207 B. [1/2] Upgrading pfSense-default-config-serial from 2.3.a.20151003.0006 to 2.3.a.20151005.1844... [1/2] Extracting pfSense-default-config-serial-2.3.a.20151005.1844: .. done [2/2] Upgrading pfSense-base-nanobsd from 2.3.a.20151003.0006 to 2.3.a.20151005.1844... ===> Keeping a copy of current version mtree [2/2] Extracting pfSense-base-nanobsd-2.3.a.20151005.1844: .. done ===> Removing schg flag from base files ===> Extracting new base tarball ===> Removing static obsoleted files >>> Removing unnecessary packages... done. >>> Cleanup pkg cache... done. External config loader 1.0 is now starting... Launching the init system...pid 21 (sh), uid 0: exited on signal 11 (core dumped)