# pfSense apinger configuration file. Automatically Generated! ## User and group the pinger should run as user "root" group "wheel" ## Mailer to use (default: "/usr/lib/sendmail -t") #mailer "/var/qmail/bin/qmail-inject" ## Location of the pid-file (default: "/var/run/apinger.pid") pid_file "/var/run/apinger.pid" ## Format of timestamp (%s macro) (default: "%b %d %H:%M:%S") #timestamp_format "%Y%m%d%H%M%S" status { ## File where the status information whould be written to file "/tmp/apinger.status" ## Interval between file updates ## when 0 or not set, file is written only when SIGUSR1 is received interval 5s } ######################################## # RRDTool status gathering configuration # Interval between RRD updates rrd interval 60s; ## These parameters can be overriden in a specific alarm configuration alarm default { command on "/usr/local/sbin/pfSctl -c 'filter reload'" command off "/usr/local/sbin/pfSctl -c 'filter reload'" combine 10s } ## "Down" alarm definition. ## This alarm will be fired when target doesn't respond for 30 seconds. alarm down "down" { time 10s } ## "Delay" alarm definition. ## This alarm will be fired when responses are delayed more than 200ms ## it will be canceled, when the delay drops below 100ms alarm delay "delay" { delay_low 200ms delay_high 500ms } ## "Loss" alarm definition. ## This alarm will be fired when packet loss goes over 20% ## it will be canceled, when the loss drops below 10% alarm loss "loss" { percent_low 10 percent_high 20 } target default { ## How often the probe should be sent interval 1s ## How many replies should be used to compute average delay ## for controlling "delay" alarms avg_delay_samples 10 ## How many probes should be used to compute average loss avg_loss_samples 50 ## The delay (in samples) after which loss is computed ## without this delays larger than interval would be treated as loss avg_loss_delay_samples 20 ## Names of the alarms that may be generated for the target alarms "down","delay","loss" ## Location of the RRD #rrd file "/var/db/rrd/apinger-%t.rrd" } target "10.64.64.0" { description "WAN" srcip "XXX.232.27.100" alarms override "loss","delay","down"; rrd file "/var/db/rrd/WAN-quality.rrd" }