Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p6 #82 1de2b093b6d(RELENG_2_4): Wed Jan 25 09:55:45 CST 2017
    root@buildbot2.netgate.com:/builder/ce/tmp/obj/builder/ce/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz (3392.23-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16560259072 (15793 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80675440, 0) error 1
random: entropy device external interface
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806754f0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806755a0, 0) error 1
wlan: mac acl policy registered
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8069e9d0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8069ea80, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8069eb30, 0) error 1
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8122a980, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xdf500000-0xdf53ffff irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <PCI-PCI bridge> irq 16 at device 8.0 on pci2
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> irq 17 at device 9.0 on pci2
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> irq 16 at device 16.0 on pci2
pci5: <PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe020-0xe03f mem 0xdf420000-0xdf43ffff,0xdf000000-0xdf3fffff,0xdf4c4000-0xdf4c7fff irq 16 at device 0.0 on pci5
igb0: Using MSIX interrupts with 2 vectors
igb0: Ethernet address: 00:1b:21:78:ff:42
igb0: netmap queues/slots: TX 1/1024, RX 1/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xdf400000-0xdf41ffff,0xde800000-0xdebfffff,0xdf4c0000-0xdf4c3fff irq 17 at device 0.1 on pci5
igb1: Using MSIX interrupts with 2 vectors
igb1: Ethernet address: 00:1b:21:78:ff:43
igb1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib6: <PCI-PCI bridge> irq 17 at device 17.0 on pci2
pci6: <PCI bus> on pcib6
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xde100000-0xde10ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xde114000-0xde1143ff irq 20 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib7: [GIANT-LOCKED]
pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci7: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib9
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xdc000000-0xddffffff,0xde000000-0xde01ffff irq 18 at device 0.0 on pci8
vgapci0: Boot video device
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci9: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci11: <ACPI PCI bus> on pcib12
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0xdfa00000-0xdfa7ffff,0xdfa80000-0xdfa83fff irq 16 at device 0.0 on pci11
igb2: Using MSIX interrupts with 2 vectors
igb2: Ethernet address: 38:2c:4a:c8:31:09
igb2: netmap queues/slots: TX 1/1024, RX 1/1024
pcib13: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci12: <ACPI PCI bus> on pcib13
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xb000-0xb01f mem 0xdf900000-0xdf97ffff,0xdf980000-0xdf983fff irq 17 at device 0.0 on pci12
igb3: Using MSIX interrupts with 2 vectors
igb3: Ethernet address: 38:2c:4a:c8:31:0a
igb3: netmap queues/slots: TX 1/1024, RX 1/1024
pcib14: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci13: <ACPI PCI bus> on pcib14
igb4: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa000-0xa01f mem 0xdf800000-0xdf87ffff,0xdf880000-0xdf883fff irq 18 at device 0.0 on pci13
igb4: Using MSIX interrupts with 2 vectors
igb4: Ethernet address: 38:2c:4a:c8:31:0b
igb4: netmap queues/slots: TX 1/1024, RX 1/1024
pcib15: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci14: <ACPI PCI bus> on pcib15
igb5: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x9000-0x901f mem 0xdf700000-0xdf77ffff,0xdf780000-0xdf783fff irq 19 at device 0.0 on pci14
igb5: Using MSIX interrupts with 2 vectors
igb5: Ethernet address: 38:2c:4a:c8:31:0c
igb5: netmap queues/slots: TX 1/1024, RX 1/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xde113000-0xde1133ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xde112000-0xde1127ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
nvme cam probe device init
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
ugen0.2: <American Megatrends Inc.> at usbus0
uhub3: <7-port Hub> on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen1.2: <vendor 0x8087> at usbus1
uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub4: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
uhub3: 5 ports with 5 removable, self powered
ugen0.3: <American Megatrends Inc.> at usbus0
ukbd0: <Keyboard Interface> on usbus0
kbd2 at ukbd0
ugen0.4: <American Megatrends Inc.> at usbus0
umass0: <Virtual Cdrom> on usbus0
ugen0.5: <American Megatrends Inc.> at usbus0
umass1: <Virtual Floppy> on usbus0
ugen0.6: <American Megatrends Inc.> at usbus0
umass2: <Virtual HardDisk> on usbus0
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SV300S37A60G 603ABBF0> ATA8-ACS SATA 3.x device
ada0: Serial Number 50026B775502EC6E
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 57241MB (117231408 512 byte sectors)
da0 at umass-sim1 bus 1 scbus8 target 0 lun 0
da0: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
da0: Serial Number AAAABBBBCCCC2
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim2 bus 2 scbus9 target 0 lun 0
da1: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device
da1: Serial Number AAAABBBBCCCC3
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
cd0 at umass-sim0 bus 0 scbus7 target 0 lun 0
cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device
cd0: Serial Number AAAABBBBCCCC1
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd0: quirks=0x10<10_BYTE_ONLY>
Timecounter "TSC-low" frequency 1696112502 Hz quality 1000
Trying to mount root from ufs:/dev/ufsid/56205ab2f758c632 [rw]...
random: unblocking device.
padlock0: No ACE support.
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
vlan0: changing name to 'igb2_vlan10'
igb2: link state changed to UP
igb2_vlan10: link state changed to UP
vlan1: changing name to 'igb3_vlan1'
vlan2: changing name to 'igb4_vlan13'
vlan3: changing name to 'igb5_vlan15'
vlan4: changing name to 'igb1_vlan25'
vlan5: changing name to 'igb0_vlan50'
tun1: changing name to 'ovpns1'
ovpns1: link state changed to UP
pflog0: promiscuous mode enabled
igb1: link state changed to UP
igb1_vlan25: link state changed to UP
igb0: link state changed to UP
igb0_vlan50: link state changed to UP
igb3: link state changed to UP
igb3_vlan1: link state changed to UP
igb4: link state changed to UP
igb4_vlan13: link state changed to UP
igb5: link state changed to UP
igb5_vlan15: link state changed to UP