|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/kernel/kernel text=0xb06995 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\data=0x3e3ed4+0xb8030 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\syms=[0x4+0xbcd20|/-\|/-\|/-\|/-\|/-+0x4+0x1027f8\|/-\|/-\|/-\|/]
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-                                                                                                     ______                        /      \                 _____/    f   \               /     \        /              /   p   \______/  Sense        \       /      \                \_____/        \                     \        /                      \______/                                                                ³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÚÀ¿ÙWelcome to pfSense!1 . Boot pfSense [default]2 . Boot pfSense with ACPI disabled3 . Boot pfSense using USB device4 . Boot pfSense in Safe Mode5 . Boot pfSense in single user mode6 . Boot pfSense with verbose logging7 . Escape to loader prompt8 . RebootSelect option, [Enter] for defaultor [Space] to pause timer    3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 \|/-\|/KDB: debugger backends: ddb

KDB: current backend: ddb

Copyright (c) 1992-2010 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

	The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 8.1-RELEASE-p4 #1: Tue Jun 21 17:38:42 EDT 2011

    sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386

Timecounter "i8254" frequency 1193182 Hz quality 0

CPU: Intel(R) Atom(TM) CPU D525   @ 1.80GHz (1807.19-MHz 686-class CPU)

  Origin = "GenuineIntel"  Id = 0x106ca  Family = 6  Model = 1c  Stepping = 10

  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

  Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>

  AMD Features=0x20100000<NX,LM>

  AMD Features2=0x1<LAHF>

  TSC: P-state invariant

real memory  = 1073741824 (1024 MB)

avail memory = 1018122240 (970 MB)

ACPI APIC Table: <122810 APIC1118>

FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs

FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads

 cpu0 (BSP): APIC ID:  0

 cpu1 (AP/HT): APIC ID:  1

 cpu2 (AP): APIC ID:  2

 cpu3 (AP/HT): APIC ID:  3

ioapic0: Changing APIC ID to 4

ioapic0 <Version 2.0> irqs 0-23 on motherboard

wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.

wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (wpi_fw, 0xc0963600, 0) error 1

ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.

ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (ipw_bss_fw, 0xc076e580, 0) error 1

ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.

ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc076e640, 0) error 1

ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.

ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.

module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc076e700, 0) error 1

wlan: mac acl policy registered

kbd1 at kbdmux0

cryptosoft0: <software crypto> on motherboard

padlock0: No ACE support.

acpi0: <122810 XSDT1118> on motherboard

acpi0: [ITHREAD]

acpi0: Power Button (fixed)

acpi0: reservation of ffc00000, 300000 (3) failed

acpi0: reservation of fee00000, 1000 (3) failed

acpi0: reservation of 0, a0000 (3) failed

acpi0: reservation of 100000, 3f600000 (3) failed

Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000

acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0

cpu0: <ACPI CPU> on acpi0

cpu1: <ACPI CPU> on acpi0

cpu2: <ACPI CPU> on acpi0

cpu3: <ACPI CPU> on acpi0

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0

pci0: <ACPI PCI bus> on pcib0

vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfea00000-0xfea7ffff,0xd0000000-0xdfffffff,0xfe900000-0xfe9fffff irq 16 at device 2.0 on pci0

agp0: <Intel Pineview SVGA controller> on vgapci0

agp0: detected 8188k stolen memory

agp0: aperture size is 256M

vgapci1: <VGA-compatible display> mem 0xfe880000-0xfe8fffff at device 2.1 on pci0

uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0xc880-0xc89f irq 16 at device 26.0 on pci0

uhci0: [ITHREAD]

uhci0: LegSup = 0x2f00

usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0

uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0xc800-0xc81f irq 21 at device 26.1 on pci0

uhci1: [ITHREAD]

uhci1: LegSup = 0x2f00

usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1

ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfeaf3c00-0xfeaf3fff irq 18 at device 26.7 on pci0

ehci0: [ITHREAD]

usbus2: EHCI version 1.0

usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0

pci0: <multimedia, HDA> at device 27.0 (no driver attached)

pcib1: <ACPI PCI-PCI bridge> irq 22 at device 28.0 on pci0

pci1: <ACPI PCI bus> on pcib1

pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.3 on pci0

pci2: <ACPI PCI bus> on pcib2

re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 19 at device 0.0 on pci2

re0: Using 1 MSI messages

re0: Chip rev. 0x28000000

re0: MAC rev. 0x00000000

miibus0: <MII bus> on re0

rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0

rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

re0: [FILTER]

pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.4 on pci0

pci3: <ACPI PCI bus> on pcib3

uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0xc480-0xc49f irq 23 at device 29.0 on pci0

uhci2: [ITHREAD]

uhci2: LegSup = 0x2f00

usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2

uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0xc400-0xc41f irq 19 at device 29.1 on pci0

uhci3: [ITHREAD]

uhci3: LegSup = 0x2f00

usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3

uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0xc080-0xc09f irq 18 at device 29.2 on pci0

uhci4: [ITHREAD]

uhci4: LegSup = 0x2f00

usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4

ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfeaf3800-0xfeaf3bff irq 23 at device 29.7 on pci0

ehci1: [ITHREAD]

usbus6: EHCI version 1.0

usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1

pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0

pci4: <ACPI PCI bus> on pcib4

re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 18 at device 4.0 on pci4

re1: Chip rev. 0x18000000

re1: MAC rev. 0x00000000

miibus1: <MII bus> on re1

rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1

rgephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

re1: [FILTER]

re2: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe400-0xe4ff mem 0xfebff800-0xfebff8ff irq 19 at device 6.0 on pci4

re2: Chip rev. 0x18000000

re2: MAC rev. 0x00000000

miibus2: <MII bus> on re2

rgephy2: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus2

rgephy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

re2: [FILTER]

re3: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfebff400-0xfebff4ff irq 16 at device 7.0 on pci4

re3: Chip rev. 0x18000000

re3: MAC rev. 0x00000000

miibus3: <MII bus> on re3

rgephy3: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus3

rgephy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

re3: [FILTER]

isab0: <PCI-ISA bridge> at device 31.0 on pci0

isa0: <ISA bus> on isab0

atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0

ata0: <ATA channel 0> on atapci0

ata0: [ITHREAD]

atapci1: <Intel ICH8M SATA300 controller> port 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f,0xb400-0xb40f irq 18 at device 31.2 on pci0

atapci1: [ITHREAD]

ata2: <ATA channel 0> on atapci1

ata2: [ITHREAD]

ata3: <ATA channel 1> on atapci1

ata3: [ITHREAD]

pci0: <serial bus, SMBus> at device 31.3 (no driver attached)

acpi_button0: <Power Button> on acpi0

atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0

uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0

uart0: [FILTER]

uart0: console (9600,n,8,1)

uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0

uart1: [FILTER]

ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0

ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode

ppc0: [ITHREAD]

ppbus0: <Parallel port bus> on ppc0

plip0: <PLIP network interface> on ppbus0

plip0: [ITHREAD]

lpt0: <Printer> on ppbus0

lpt0: [ITHREAD]

lpt0: Interrupt-driven port

ppi0: <Parallel I/O> on ppbus0

atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0

atkbd0: <AT Keyboard> irq 1 on atkbdc0

kbd0 at atkbd0

atkbd0: [GIANT-LOCKED]

atkbd0: [ITHREAD]

pmtimer0 on isa0

orm0: <ISA Option ROM> at iomem 0xce000-0xcefff pnpid ORM0000 on isa0

sc0: <System console> at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x100>

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

p4tcc0: <CPU Frequency Thermal Control> on cpu0

p4tcc1: <CPU Frequency Thermal Control> on cpu1

p4tcc2: <CPU Frequency Thermal Control> on cpu2

p4tcc3: <CPU Frequency Thermal Control> on cpu3

Timecounters tick every 1.000 msec

IPsec: Initialized Security Association Processing.

usbus0: 12Mbps Full Speed USB v1.0

usbus1: 12Mbps Full Speed USB v1.0

usbus2: 480Mbps High Speed USB v2.0

usbus3: 12Mbps Full Speed USB v1.0

usbus4: 12Mbps Full Speed USB v1.0

usbus5: 12Mbps Full Speed USB v1.0

usbus6: 480Mbps High Speed USB v2.0

ugen0.1: <Intel> at usbus0

uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0

ugen1.1: <Intel> at usbus1

uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1

ugen2.1: <Intel> at usbus2

uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2

ugen3.1: <Intel> at usbus3

uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3

ugen4.1: <Intel> at usbus4

uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4

ugen5.1: <Intel> at usbus5

uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5

ugen6.1: <Intel> at usbus6

uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6

ad0: 985MB <Emphase FDM44XDI1G 100511B> at ata0-master PIO4 

ad0: FAILURE - READ_MUL status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=58<UNCORRECTABLE,NID_NOT_FOUND,MEDIA_CHANGE_REQEST> LBA=128

ad0: FAILURE - READ_MUL status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 LBA=16

ad0: FAILURE - READ_MUL status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 LBA=512

ad0: FAILURE - READ_MUL status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=58<UNCORRECTABLE,NID_NOT_FOUND,MEDIA_CHANGE_REQEST> LBA=128

ad0: FAILURE - READ_MUL status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 LBA=16

ad0: FAILURE - READ_MUL status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=58<UNCORRECTABLE,NID_NOT_FOUND,MEDIA_CHANGE_REQEST> LBA=0

ad0: FAILURE - READ_MUL status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 LBA=512

ad0: FAILURE - READ status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=58<UNCORRECTABLE,NID_NOT_FOUND,MEDIA_CHANGE_REQEST> LBA=0

ad0: FAILURE - READ status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=58<UNCORRECTABLE,NID_NOT_FOUND,MEDIA_CHANGE_REQEST> LBA=2017999

ad0: FAILURE - READ status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 LBA=2018012

ad0: FAILURE - READ status=51<READY,DSC,ERROR> error=14<NID_NOT_FOUND,ABORTED> LBA=2018015

ad0: FAILURE - READ status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=58<UNCORRECTABLE,NID_NOT_FOUND,MEDIA_CHANGE_REQEST> LBA=2018015

ad0: FAILURE - READ status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 LBA=2017953

SMP: AP CPU #1 Launched!

SMP: AP CPU #2 Launched!

SMP: AP CPU #3 Launched!

Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0

uhub5: 2 ports with 2 removable, self powered

uhub3: 2 ports with 2 removable, self powered

uhub4: 2 ports with 2 removable, self powered

uhub0: 2 ports with 2 removable, self powered

uhub1: 2 ports with 2 removable, self powered

Root mount waiting for: usbus6 usbus2

uhub2: 4 ports with 4 removable, self powered

uhub6: 6 ports with 6 removable, self powered

Root mount waiting for: usbus6

ugen6.2: <USB2.0 External> at usbus6

umass0: <USB2.0 External Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus6

umass0:  SCSI over Bulk-Only; quirks = 0x0000

Root mount waiting for: usbus6

umass0:0:0:-1: Attached to scbus0

Trying to mount root from ufs:/dev/ad0s1a

ROOT MOUNT ERROR: 

If you have invalid mount options, reboot, and first try the following from

the loader prompt:



     set vfs.root.mountfrom.options=rw

cd0 at umass-sim0 bus 0 scbus0 target 0 lun 0



cd0: and then remove invalid mount options from <ASUS SDR-08B1-U 1.00> Removable CD-ROM SCSI-0 device 

/etc/fstab.

cd0: 40.000MB/s transfers



Loader variables:

cd0: cd present [32753 x 2048 byte records]

vfs.root.mountfrom=ufs:/dev/ad0s1a

vfs.root.mountfrom.options=rw



Manual root filesystem specification:

  <fstype>:<device>  Mount <device> using filesystem <fstype>

                       eg. ufs:/dev/da0s1a

                       eg. cd9660:/dev/acd0

                       This is equivalent to: mount -t cd9660 /dev/acd0 /



  ?                  List valid disk boot devices

  <empty line>       Abort manual input



mountroot>