Short press detected, entering the factory-defaults recovery mode. Waiting for the long press to confirm. *********************************************************************** * Reset button pressed - resetting configuration to factory defaults. * * All additional packages installed will be removed * * The system will reboot after this completes. * *********************************************************************** Stopping /usr/local/etc/rc.d/lighttpd_ls.sh...done. Stopping /usr/local/etc/rc.d/node_exporter.sh...done. Stopping /usr/local/etc/rc.d/sqp_monitor.sh...done. Stopping /usr/local/etc/rc.d/squid.sh...done. Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 done All buffers synced. Uptime: 53s uhub0: detached isSecurebootEnabled = 01 secureboot not enabled Loading Usb Lens... Provider: Insyde Software Version: 05.12.02.0040.0009.15 Product: BlinkBoot(R) Harrisonville USB Lens Licensee: Silicom Ltd. Start: 03/20/2018 End: 12/31/2099 Validating Signature... [Pass] Installing Usb Lens... Loading Nvme Lens... Provider: Insyde Software Version: 05.12.02.0040.0009.15 Product: BlinkBoot(R) Harrisonville NVMe Lens Licensee: Silicom Ltd. Start: 11/16/2020 End: 12/31/2099 Validating Signature... [Pass] Installing Nvme Lens... Loading Sata Lens... Provider: Insyde Software Version: 05.12.02.0040.0009.15 Product: BlinkBoot(R) Harrisonville SATA Lens Licensee: Silicom Ltd. Start: 03/20/2018 End: 12/31/2099 Validating Signature... [Pass] Installing Sata Lens... Loading SdMmc Lens... Provider: Insyde Software Version: 05.12.02.0040.0009.15 Product: BlinkBoot(R) Harrisonville SDxx/eMMC Lens Licensee: Silicom Ltd. Start: 03/20/2018 End: 12/31/2099 Validating Signature... [Pass] Installing SdMmc Lens... Mapping table FS2: Alias(s):F0: Fv(E35C4A77-3D00-4337-A625-B980A9E00F6C) FS4: Alias(s):F0: Fv(F9657F27-CAE7-4951-A406-D286157B63EF) FS3: Alias(s):F0: Fv(E7082AE5-3036-407A-8060-FDF027F74632) FS0: Alias(s):F0: Fv(1643501D-ABD6-4ECC-85DE-3D95D23423FE) FS1: Alias(s):F0: Fv(50E81C5A-EAB2-495C-871E-EF46044C8959) FS5: Alias(s):HD20b:;BLK1: PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000) BLK0: Alias(s): PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0) BLK2: Alias(s): PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(2,GPT,5BF4CD1F-A988-11ED-8CEC-897F5BF3F01D,0x82003,0x1CB1FF5) Locking SPI ... Launching Lock flash... Already Lock the SPI Error. 8BE4DF61-93CA-11D2-AA0D-00E098032B8C - BootNext - unable to set: Not Found Checking Hotkey... Key Options: 'r' -- Clear boot order list. 'p' -- PXE boot. 'F2' -- Boot Manager Menu. Any key to continue Error. C450ED8E-C3C2-4FE7-AEE6-D1C50ABB78CF - PXEVariable - unable to set: Not Found Error. C450ED8E-C3C2-4FE7-AEE6-D1C50ABB78CF - RestOrderVariable - unable to set: Not Found Option: 00. Variable: Boot0013 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)/\EFI\BOOT\bootx64.efi Optional- N BootOrder0000:FS5:\EFI\BOOT\bootx64.efi Option: 01. Variable: Boot0012 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)/\EFI\BOOT\bootx64.efi Optional- N Option: 02. Variable: Boot0011 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,D048D2B4-B6EA-11ED-9ACB-90EC771F8C3F,0x28,0x82000)/\efi\boot\bootx64.efi Optional- N Option: 03. Variable: Boot0010 Desc - FreeBSD DevPath - HD(1,GPT,D048D2B4-B6EA-11ED-9ACB-90EC771F8C3F,0x28,0x82000)/\efi\freebsd\loader.efi Optional- N Option: 04. Variable: Boot000F Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x2,0x0)/HD(1,MBR,0x90909090,0x1,0x10418)/\EFI\BOOT\bootx64.efi Optional- N Option: 05. Variable: Boot000E Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,3BB92395-A1A0-11ED-AADE-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 06. Variable: Boot000D Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x2,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi Optional- N Option: 07. Variable: Boot000C Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,9A9A1083-A173-11ED-9994-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 08. Variable: Boot000B Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x6,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi Optional- N Option: 09. Variable: Boot000A Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,AB3FD5A0-9EAB-11ED-9424-90EC771F8C3F,0x28,0x82000)/\efi\boot\bootx64.efi Optional- N Option: 0A. Variable: Boot0009 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,MBR,0x90909090,0x1,0x10418)/\EFI\BOOT\bootx64.efi Optional- N Option: 0B. Variable: Boot0008 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,856AB062-EC12-11EC-B466-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 0C. Variable: Boot0007 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5C35E7C5-EB43-11EC-9832-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 0D. Variable: Boot0006 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,930C88AA-EB3E-11EC-A469-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 0E. Variable: Boot0005 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,E29FF58D-EB32-11EC-9A8F-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 0F. Variable: Boot0004 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,C728CB0C-D627-11EC-940E-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 10. Variable: Boot0003 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,94226BA7-D619-11EC-99E9-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 11. Variable: Boot0002 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi Optional- N Option: 12. Variable: Boot0001 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,E99BD7A0-CFB0-11EC-A21E-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 13. Variable: Boot0000 Desc - PXE-0 DevPath - Fv(E35C4A77-3D00-4337-A625-B980A9E00F6C)/\pxe_0.nsh Optional- N BootOrder0013:FS2:\pxe_0.nsh Shell> map -r Mapping table FS2: Alias(s):F0: Fv(E35C4A77-3D00-4337-A625-B980A9E00F6C) FS4: Alias(s):F0: Fv(F9657F27-CAE7-4951-A406-D286157B63EF) FS3: Alias(s):F0: Fv(E7082AE5-3036-407A-8060-FDF027F74632) FS0: Alias(s):F0: Fv(1643501D-ABD6-4ECC-85DE-3D95D23423FE) FS1: Alias(s):F0: Fv(50E81C5A-EAB2-495C-871E-EF46044C8959) FS5: Alias(s):HD20b:;BLK1: PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000) BLK0: Alias(s): PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0) BLK2: Alias(s): PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(2,GPT,5BF4CD1F-A988-11ED-8CEC-897F5BF3F01D,0x82003,0x1CB1FF5) Shell> bcfg boot dump Option: 00. Variable: Boot0013 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)/\EFI\BOOT\bootx64.efi Optional- N BootOrder0000:FS5:\EFI\BOOT\bootx64.efi Option: 01. Variable: Boot0012 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)/\EFI\BOOT\bootx64.efi Optional- N Option: 02. Variable: Boot0011 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,D048D2B4-B6EA-11ED-9ACB-90EC771F8C3F,0x28,0x82000)/\efi\boot\bootx64.efi Optional- N Option: 03. Variable: Boot0010 Desc - FreeBSD DevPath - HD(1,GPT,D048D2B4-B6EA-11ED-9ACB-90EC771F8C3F,0x28,0x82000)/\efi\freebsd\loader.efi Optional- N Option: 04. Variable: Boot000F Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x2,0x0)/HD(1,MBR,0x90909090,0x1,0x10418)/\EFI\BOOT\bootx64.efi Optional- N Option: 05. Variable: Boot000E Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,3BB92395-A1A0-11ED-AADE-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 06. Variable: Boot000D Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x2,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi Optional- N Option: 07. Variable: Boot000C Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,9A9A1083-A173-11ED-9994-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 08. Variable: Boot000B Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x6,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi Optional- N Option: 09. Variable: Boot000A Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,AB3FD5A0-9EAB-11ED-9424-90EC771F8C3F,0x28,0x82000)/\efi\boot\bootx64.efi Optional- N Option: 0A. Variable: Boot0009 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,MBR,0x90909090,0x1,0x10418)/\EFI\BOOT\bootx64.efi Optional- N Option: 0B. Variable: Boot0008 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,856AB062-EC12-11EC-B466-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 0C. Variable: Boot0007 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5C35E7C5-EB43-11EC-9832-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 0D. Variable: Boot0006 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,930C88AA-EB3E-11EC-A469-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 0E. Variable: Boot0005 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,E29FF58D-EB32-11EC-9A8F-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 0F. Variable: Boot0004 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,C728CB0C-D627-11EC-940E-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 10. Variable: Boot0003 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,94226BA7-D619-11EC-99E9-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 11. Variable: Boot0002 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi Optional- N Option: 12. Variable: Boot0001 Desc - bootx64.efi DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,E99BD7A0-CFB0-11EC-A21E-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi Optional- N Option: 13. Variable: Boot0000 Desc - PXE-0 DevPath - Fv(E35C4A77-3D00-4337-A625-B980A9E00F6C)/\pxe_0.nsh Optional- N BootOrder0013:FS2:\pxe_0.nsh Shell> echo %BootOrder0000% FS5:\EFI\BOOT\bootx64.efi Shell> %BootOrder0000% Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p1: FreeBSD/amd64 EFI loader, Revision 1.1 (Fri Feb 10 20:27:51 UTC 2023 root@freebsd) Command line arguments: FS5:\EFI\BOOT\bootx64.efi Image base: 0x74f0f000 EFI version: 2.50 EFI Firmware: Insyde May 3 2022 11:32:00 (rev 0.00) Console: efi (0x1000) Load Path: \EFI\BOOT\bootx64.efi Load Device: PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000) BootOrder: 0013 0012 0011 0010 000f 000e 000d 000c 000b 000a 0009 0008 0007 0006 0005 0004 0003 0002 0001 0000 Trying ESP: PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000) Setting currdev to disk0p1: Trying: PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(2,GPT,5BF4CD1F-A988-11ED-8CEC-897F5BF3F01D,0x82003,0x1CB1FF5) Setting currdev to zfs:pfSense/ROOT/default: Loading /boot/defaults/loader.conf Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local / \ __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| ���ڒB� ---- Welcome to Netgate pfSense Plu�[11;5H1. Boot Multi user [Enter]______ | | / ___\ | | | /` | 2. Boot Single user | | / :-| | 3. Escape to loader prompt | | _________ ___/ /_ | | 4. Reboot | | /` ____ / /__ ___/ | | 5. Cons: Serial | | / / / / / / | | | | / /___/ / / / | | Options: | | / ______/ / / _ | | 6. Kernel: default/kernel (1 of 2) | |/ / / / _| |_ | | 7. Boot Options | / /___/ |_ _| | | 8. Boot Environments | / |_| | | | /_________________________/ +-----------------------------------------+ !| Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x19b408 text=0xfe5bc8 text=0x17d9b80 data=0x180 data=0x266d68+0x398298 0x8+0x1c9950+0x8+0x1d62e6 Loading configured modules... can't find '/boot/entropy' /boot/kernel/zfs.ko size 0x5ba0d8 at 0x35a0000 /boot/kernel/opensolaris.ko size 0xaab0 at 0x3b5b000 can't find '/etc/hostid' staging 0x64800000 (not copying) tramp 0x74db4000 PT4 0x73c08000 Start @ 0xffffffff8039c000 ... EFI framebuffer information: addr, size 0x0, 0x0 dimensions 0 x 0 stride 0 masks 0x00000000, 0x00000000, 0x00000000, 0x00000000 GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb ---<>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT #0 plus-RELENG_23_05-n256095-07a58678065: Tue May 9 23:11:10 UTC 2023 root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-23_05-main/obj/amd64/IZb37dS4/var/jenkins/workspace/pfSense-Plus-snapshots-23_05-main/sources/FreeBSD-src-plus-RELENG_23_05/amd64.amd64/sys/pfSense amd64 FreeBSD clang version 15.0.7 (https://github.com/llvm/llvm-project.git llvmorg-15.0.7-0-g8dfdcc7b7bf6) VT(vga): resolution 640x480 CPU: Intel(R) Atom(TM) CPU C3338R @ 1.80GHz (1800.18-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 Features=0xbfebfbff Features2=0x4ff8ebbf AMD Features=0x2c100800 AMD Features2=0x101 Structured Extended Features=0x2294e283 Structured Extended Features3=0xac000400 XSAVE Features=0xf IA32_ARCH_CAPS=0xc69 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3965308928 (3781 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. ioapic0 irqs 0-119 Launching APs: 1 TCP_ratelimit: Is now initialized wlan: mac acl policy registered ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8074daf0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8074dba0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8074dc50, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8076b080, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8076b130, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8076b1e0, 0) error 1 random: entropy device external interface kbd0 at kbdmux0 WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. vtvga0: netgate0: efirtc0: efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: at iomem 0x7c51d000-0x7c51d01e smbios0: Version: 3.0, BCD Revision: 3.0 acpi0: acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: on acpi0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 Event timer "HPET3" frequency 24000000 Hz quality 440 Event timer "HPET4" frequency 24000000 Hz quality 440 Event timer "HPET5" frequency 24000000 Hz quality 440 Event timer "HPET6" frequency 24000000 Hz quality 440 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 6.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pcib2: mem 0x81500000-0x8151ffff at device 10.0 on pci0 pci2: on pcib2 pcib3: mem 0x81520000-0x8153ffff at device 11.0 on pci0 pci3: on pcib3 pcib4: mem 0x81540000-0x8155ffff at device 12.0 on pci0 pci4: on pcib4 igc0: mem 0x81300000-0x813fffff,0x81400000-0x81403fff at device 0.0 on pci4 igc0: Using 1024 TX descriptors and 1024 RX descriptors igc0: Using 2 RX queues 2 TX queues igc0: Using MSI-X interrupts with 3 vectors igc0: Ethernet address: 90:ec:77:1f:8c:3f igc0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib5: mem 0x81560000-0x8157ffff at device 14.0 on pci0 pci5: on pcib5 igc1: mem 0x81100000-0x811fffff,0x81200000-0x81203fff at device 0.0 on pci5 igc1: Using 1024 TX descriptors and 1024 RX descriptors igc1: Using 2 RX queues 2 TX queues igc1: Using MSI-X interrupts with 3 vectors igc1: Ethernet address: 90:ec:77:1f:8c:40 igc1: netmap queues/slots: TX 2/1024, RX 2/1024 pcib6: mem 0x81580000-0x8159ffff at device 15.0 on pci0 pci6: on pcib6 igc2: mem 0x80f00000-0x80ffffff,0x81000000-0x81003fff at device 0.0 on pci6 igc2: Using 1024 TX descriptors and 1024 RX descriptors igc2: Using 2 RX queues 2 TX queues igc2: Using MSI-X interrupts with 3 vectors igc2: Ethernet address: 90:ec:77:1f:8c:41 igc2: netmap queues/slots: TX 2/1024, RX 2/1024 pcib7: mem 0x815a0000-0x815bffff at device 16.0 on pci0 pci7: on pcib7 igc3: mem 0x80d00000-0x80dfffff,0x80e00000-0x80e03fff at device 0.0 on pci7 igc3: Using 1024 TX descriptors and 1024 RX descriptors igc3: Using 2 RX queues 2 TX queues igc3: Using MSI-X interrupts with 3 vectors igc3: Ethernet address: 90:ec:77:1f:8c:42 igc3: netmap queues/slots: TX 2/1024, RX 2/1024 xhci0: mem 0x815c0000-0x815cffff at device 21.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pcib8: at device 22.0 on pci0 pci8: on pcib8 ix0: mem 0x80400000-0x805fffff,0x80604000-0x80607fff at device 0.0 on pci8 ix0: Using 2048 TX descriptors and 2048 RX descriptors ix0: Using 2 RX queues 2 TX queues ix0: Using MSI-X interrupts with 3 vectors ix0: allocated for 2 queues ix0: allocated for 2 rx queues ix0: Ethernet address: ff:ff:ff:ff:ff:ff ix0: eTrack 0x80000847 ix0: netmap queues/slots: TX 2/2048, RX 2/2048 ix1: mem 0x80200000-0x803fffff,0x80600000-0x80603fff at device 0.1 on pci8 ix1: Using 2048 TX descriptors and 2048 RX descriptors ix1: Using 2 RX queues 2 TX queues ix1: Using MSI-X interrupts with 3 vectors ix1: allocated for 2 queues ix1: allocated for 2 rx queues ix1: Ethernet address: ff:ff:ff:ff:ff:ff ix1: eTrack 0x80000847 ix1: netmap queues/slots: TX 2/2048, RX 2/2048 pcib9: at device 23.0 on pci0 pci9: on pcib9 ix2: mem 0x80a00000-0x80bfffff,0x80c04000-0x80c07fff at device 0.0 on pci9 ix2: Using 2048 TX descriptors and 2048 RX descriptors ix2: Using 2 RX queues 2 TX queues ix2: Using MSI-X interrupts with 3 vectors ix2: allocated for 2 queues ix2: allocated for 2 rx queues ix2: Ethernet address: 90:ec:77:1f:8c:3e ix2: eTrack 0x80000889 ix2: netmap queues/slots: TX 2/2048, RX 2/2048 ix3: mem 0x80800000-0x809fffff,0x80c00000-0x80c03fff at device 0.1 on pci9 ix3: Using 2048 TX descriptors and 2048 RX descriptors ix3: Using 2 RX queues 2 TX queues ix3: Using MSI-X interrupts with 3 vectors ix3: allocated for 2 queues ix3: allocated for 2 rx queues ix3: Ethernet address: 90:ec:77:1f:8c:3d ix3: eTrack 0x80000889 ix3: netmap queues/slots: TX 2/2048, RX 2/2048 pci0: at device 24.0 (no driver attached) sdhci_pci0: mem 0x815d6000-0x815d6fff,0x815d7000-0x815d7fff at device 28.0 on pci0 sdhci_pci0: 1 slot(s) allocated mmc0: on sdhci_pci0 isab0: at device 31.0 on pci0 isa0: on isab0 pci0: at device 31.2 (no driver attached) pci0: at device 31.5 (no driver attached) acpi_button0: on acpi0 acpi_tz0: on acpi0 ns8250: UART FCR is broken0 class UART with FIFOs> port 0x3f8-0x3ff irq 16 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: port 0x2f8-0x2ff irq 17 on acpi0 est0: on cpu0 Timecounter "TSC" frequency 1799999668 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) [nl_generic_kpi] genl_register_family: Registered family nlctrl id 16 [nl_generic_kpi] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl [nl_generic_kpi] genl_register_family: Registered family carp id 17 [nl_generic_kpi] genl_register_cmds: Adding cmd SIOCGVH(1) to family carp [nl_generic_kpi] genl_register_cmds: Adding cmd SIOCSVH(2) to family carp ugen0.1: at usbus0 uhub0 on usbus0 uhub0: on usbus0 mmcsd0: 16GB at mmc0 50.0MHz/8bit/65535-block mmcsd0boot0: 4MB partition 1 at mmcsd0 mmcsd0boot1: 4MB partition 2 at mmcsd0 mmcsd0rpmb: 4MB partition 3 at mmcsd0 random: unblocking device. Trying to mount root from zfs:pfSense/ROOT/default []... uhub0: 8 ports with 8 removable, self powered Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Netgate Cordoba GPIO Driver 0.4 loaded cordbuc0: at port 0x800 on isa0 gpio0: on cordbuc0 gpiobus0: on gpio0 gpioled0: at pin 0 on gpiobus0 gpioled1: at pin 1 on gpiobus0 gpioled10: at pin 10 on gpiobus0 gpioled11: at pin 11 on gpiobus0 gpioled2: at pin 2 on gpiobus0 gpioled3: at pin 3 on gpiobus0 gpioled4: at pin 4 on gpiobus0 gpioled5: at pin 5 on gpiobus0 gpioled6: at pin 6 on gpiobus0 gpioled7: at pin 7 on gpiobus0 gpioled8: at pin 8 on gpiobus0 gpioled9: at pin 9 on gpiobus0 gpioc0: on gpio0 Configuring crash dumps... No suitable dump device was found. Filesystems are clean, continuing... Mounting filesystems... Mounting ZFS boot environment... done. Restoring contents of RAM disk store... done. __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| Welcome to Netgate pfSense Plus 23.05-RC... ...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lib/engines /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE 32-bit compatibility ldconfig path: done. External config loader 1.0 is now starting... mmcsd0p1 mmcsd0p2 Launching the init system...Updating CPU Microcode... CPU: Intel(R) Atom(TM) CPU C3338R @ 1.80GHz (1800.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 Features=0xbfebfbff Features2=0x4ff8ebbf AMD Features=0x2c100800 AMD Features2=0x101 Structured Extended Features=0x2294e283 Structured Extended Features3=0xac000400 XSAVE Features=0xf IA32_ARCH_CAPS=0xc69 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics Done. done. Initializing.................. done. Starting device manager (devd)...ichsmb0: port 0x2000-0x201f mem 0x815d8000-0x815d80ff at device 31.4 on pci0 smbus0: on ichsmb0 done. Loading configuration....done. ..............................Updating configuration.........Migrating System Memory RRD file to new format .done. Checking config backups consistency...done. Loading cryptographic accelerator drivers...qat0: mem 0x80700000-0x8073ffff,0x80740000-0x8077ffff at device 0.0 on pci1 qat0: qat_dev0 started 6 acceleration engines qat0: FW version: 4.18.0 qat0: Excessive clock measure delay qat_ocf0: done. Setting up extended sysctls...done. Executing early shell commands...done. coretemp0: on cpu0 Setting timezone...done. Configuring looplo0: link state changed to UP back interface...done. Starting syslog...done. Setting up interfaces microcode...done. Configuring loopback interface...done. Configuring WAN2 interface...done. Configuring LAN2 interface...done. Configuring LAN3 interface...done. Configuring LAN4 interface...done. Configuring LAN interface...done. Configuring WAN interface...done. Configuring CARP settings...done. Syncing OpenVPN settings...done. Configuring firewall......done. Starting PFLOG...done. Setting up gateway monitors...done. Setting up static routes...done. Setting up DNSs... Starting DNS Resolver...done. Synchronizing user settings...done. Configuring CRON...done. Bootstrapping clock...done. Starting NTP Server...done. Starting webConfigurator...done. Starting DHCP service...done. Starting DHCPv6 service...done. Configuring firewall......done. Generating RRD graphs...done. Running last steps of acme installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...done. Menu items... done. Writing configuration... done. Running last steps of aws-wizard installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Custom commands... Menu items... done. Writing configuration... done. Running last steps of ipsec-profile-wizard installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Custom commands... Menu items... done. Writing configuration... done. Running last steps of Lightsquid installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()... Remove any existing and create new hardlink for lightsquid lighttpd executable... done. Creating Lightsquid web server start-up script... done. Creating lightsquid web server config ... done. Starting lightsquid lighttpd Service... done. done. Executing custom_php_resync_config_command()...done. Menu items... done. Services... done. Writing configuration... done. Running last steps of Netgate_Firmware_Upgrade installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Menu items... done. Writing configuration... done. Running last steps of node_exporter installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...done. Executing custom_php_resync_config_command()...done. Menu items... done. Services... done. Writing configuration... done. Running last steps of openvpn-client-export installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...done. Writing configuration... done. Running last steps of openvpn-client-import installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Writing configuration... done. Running last steps of squid installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...done. Executing custom_php_resync_config_command()...done. Menu items... done. Services... done. Writing configuration... done. Running last steps of squidGuard installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...done. Executing custom_php_resync_config_command()...done. Menu items... done. Services... done. Writing configuration... done. Please visit Services - SquidGuard Proxy Filter - Target Categories and set up at least one category there before enabling SquidGuard. See https://docs.netgate.com/pfsense/en/latest/packages/cache-proxy/squidguard.html for details.Running last steps of System_Patches installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...done. Menu items... done. Writing configuration... done. Running last steps of Tailscale installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()... Creating Tailscale interface group... done. done. Executing custom_php_resync_config_command()...done. Menu items... done. Services... done. Writing configuration... done. Running last steps of WireGuard installation. Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...done. Installing WireGuard early shell commands...done. Creating WireGuard interface group...done. Creating WireGuard Unbound access list...done. Installing WireGuard service...done. Applying WireGuard default settings as necessary...done. done. Executing custom_php_resync_config_command()...done. Menu items... done. Services... done. Writing configuration... done. Starting syslog...done. Starting CRON... done. Starting package acme...done. Starting package AWS VPC Wizard...done. Starting package IPsec Profile Wizard...done. Starting package Lightsquid...done. Starting package Netgate Firmware Upgrade...done. Starting package node_exporter...done. Starting package OpenVPN Client Export Utility...done. Starting package OpenVPN Client Import Utility...done. Starting package squid3...done. Starting package squidGuard...done. Starting package System Patches...done. Starting package Tailscale...done. Starting package WireGuard...done. Starting /usr/local/etc/rc.d/c-icap.sh...done. Starting /usr/local/etc/rc.d/clamd.sh...done. Starting /usr/local/etc/rc.d/lighttpd_ls.sh...done. Starting /usr/local/etc/rc.d/sqp_monitor.sh...done. Netgate pfSense Plus 23.05-RC amd64 Tue May 09 22:45:57 UTC 2023 Bootup complete FreeBSD/amd64 (pfSense.home.arpa) (ttyu0) Netgate 4100 - Serial: 2053211262 - Netgate Device ID: 149e925b4142682d8c85 *** Welcome to Netgate pfSense Plus 23.05-RC (amd64) on pfSense *** Current Boot Environment: default Next Boot Environment: default WAN (wan) -> ix3 -> v4/DHCP4: 172.21.16.206/24 LAN (lan) -> igc0 -> v4: 192.168.1.1/24 WAN2 (opt1) -> ix2 -> LAN2 (opt2) -> igc1 -> LAN3 (opt3) -> igc2 -> LAN4 (opt4) -> igc3 -> 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Enable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: