__
 _ __  / _|___  ___ _ __  ___  ___      _
| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \   _| |_
| |_) |  _\__ \  __/ | | \__ \  __/  |_   _|
| .__/|_| |___/\___|_| |_|___/\___|    |_|
|_|


Welcome to Netgate pfSense Plus 24.11-RELEASE...

Checking dump device /dev/gpt/swap1 for crash dumps ... no crash dumps on /dev/gpt/swap1.
...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.36/mach/CORE
32-bit compatibility ldconfig path:
done.
7536
External config loader 1.0 is now starting... nda0p1 nda0p2 nda0p3 nda0p4 mmcsd0p1 mmcsd0p2 mmcsd0p3 mmcsd0p4
Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x14000c69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
Done.
 done.
Initializing.................... done.
Starting device manager (devd)...ichsmb0: <Intel Denverton SMBus controller> port 0x2000-0x201f mem 0x816f8000-0x816f80ff at device 31.4 on pci0
smbus0: <System Management Bus> on ichsmb0
done.
Loading configuration...done.
Updating configuration......done.
Warning: Configuration references interfaces that do not exist: tailscale0

Network interface mismatch -- Running interface assignment option.

Valid interfaces are:

igc0    90:ec:77:1d:13:ee (down) Intel(R) Ethernet Controller I225-V
igc1    90:ec:77:1d:13:ef (down) Intel(R) Ethernet Controller I225-V
igc2    90:ec:77:1d:13:f0 (down) Intel(R) Ethernet Controller I225-V
igc3    90:ec:77:1d:13:f1 (down) Intel(R) Ethernet Controller I225-V
ix0     90:ec:77:1d:13:ec (down) Intel(R) X553 N (SFP+)
ix1     90:ec:77:1d:13:ed (down) Intel(R) X553 N (SFP+)
ix2     90:ec:77:1d:13:eb (down) Intel(R) X553 L (1GbE)
ix3     90:ec:77:1d:13:ea (down) Intel(R) X553 L (1GbE)

Do VLANs need to be set up first?
If VLANs will not be used, or only for optional interfaces, it is typical to
say no here and use the webConfigurator to configure VLANs later, if required.

Should VLANs be set up now [y|n]? ix3: link state changed to UP
igc0: link state changed to UP
2024-12-06T18:43:34.735252+00:00 - php-fpm 618 - - /rc.linkup: Ignoring link event during boot sequence.
2024-12-06T18:43:34.737123+00:00 - php-fpm 617 - - /rc.linkup: DHCP Client not running on wan (ix3), reconfiguring dhclient.
2024-12-06T18:43:35.871812+00:00 - php-fpm 618 - - /rc.newwanip: rc.newwanip: Info: starting on ix3.
2024-12-06T18:43:35.872192+00:00 - php-fpm 618 - - /rc.newwanip: rc.newwanip: on (IP address: 172.21.56.155) (interface: WAN[wan]) (real interface: ix3).
pflog0: promiscuous mode enabled
2024-12-06T18:43:36.975690+00:00 - php-fpm 618 - - /rc.newwanip: Gateway, NONE AVAILABLE
2024-12-06T18:43:36.979556+00:00 - php-fpm 618 - - /rc.newwanip: Default gateway setting Interface WAN_DHCP Gateway as default.
2024-12-06T18:43:36.986090+00:00 - php-fpm 618 - - /rc.newwanip: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'