FreeBSD/amd64 (pfSense.home.arpa) (ttyv0) Hyper-V Virtual Machine - Netgate Device ID: ed909cae8074c23d6ec5 *** Welcome to pfSense 2.8.0-RELEASE (amd64) on pfSense *** WAN (wan) -> hn0 -> v4: 192.168.18.131/24 LAN (lan) -> hn1 -> v4: 192.168.1.1/24 0) Logout / Disconnect SSH 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart GUI 3) Reset admin account and password 12) PHP shell + pfSense tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Enable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 2 Available interfaces: 1 - WAN (hn0 - static) 2 - LAN (hn1 - static) Enter the number of the interface you wish to configure: 1 Configure IPv4 address WAN interface via DHCP? (y/n) n Enter the new WAN IPv4 address. Press ENTER> for none: >10.0.0.139/24 For a WAN, enter the new WAN IPv4 upstream gateway address. For a LAN, press for none: 10.0.0.3 Should this gateway be set as the default gateway? (y/n) y Configure IPv6 address WAN interface via DHCP6? (y/n) n Enter the new WAN IPv6 address. Press KENTER> for none: > Do you want to enable the DHCP server on WAN? (y/n)_n Do you want to revert to HTTP as the webConfigurator protocol? (y/n) n Please wait while the changes are saved to WAN... Reloading filter... Reloading routing configuration... The IPv4 WAN address has been set to 10.0.0.139/24 Press to continue. Hyper-V Virtual Machine - Netgate Device ID: ed909cae8074c23d6ec5 *** Welcome to pfSense 2.8.0-RELEASE (amd64) on pfSense *** WAN (wan) -> hn0 -> v4: 10.0.0.139/24 LAN (lan) -> hn1 -> v4: 192.168.1.1/24 0) Logout / Disconnect SSH 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart GUI 3) Reset admin account and password 12) PHP shell + pfSense tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Enable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 8 [2.8.0-RELEASE] [root@pfSense.home.arpa]/root: ping -c 2 dns.google ping: cannot resolve dns.google: Name does not resolve [2.8.0-RELEASE][root@pfSense.home.arpal/root: pfSsh.php playback svc restart unbound Attempting to issue restart to unbound service... unbound has been restarted. [2.8.0-RELEASE] [root@pfSense.home.arpal/root: ping -c 2 dns.google PING dns.google (8.8.8.8): 56 data bytes 64 bytes from 8.8.8.8: icmp_seq=0 ttl=119 time=9.690 ms 64 bytes from 8.8.8.8: icmp_seq=1 ttl=119 time=11.402 ms --- dns.google ping statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 9.690/10.546/11.402/0.856 ms [2.8.0-RELEASE][root@pfSense.home.arpa]/root: grep -r "rc.start_packages" /var/log [2.8.0-RELEASE][root@pfSense.home.arpal/root: exit exit Hyper-V Virtual Machine - Netgate Device ID: ed909cae8074c23d6ec5 *** Welcome to pfSense 2.8.0-RELEASE (amd64) on pfSense *** WAN (wan) -> hn0 -> v4: 10.0.0.139/24 LAN (lan) -> hn1 -> v4: 192.168.1.1/24 0) Logout / Disconnect SSH 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart GUI 3) Reset admin account and password 12) PHP shell + pfSense tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Enable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 5 pfSense will reboot. This may take a few minutes, depending on your hardware. Do you want to proceed? Y/y: Reboot normally R/r: Reroot (Stop processes, remount disks, re-run startup sequence) S: Reboot into Single User Mode (requires console access!) Enter an option: y pfSense is rebooting now.