---<<BOOT>>---
Copyright (c) 1992-2026 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 16.0-CURRENT #36 plus-RELENG_26_03-n256531-4923e82e59d1: Fri Mar 20 18:22:49 UTC 2026
    root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-Plus-snapshots-26_03-main/obj/amd64/TVcqnR7U/var/jenkins/workspace/pfSense-Plus-snapshots-26_03-main/sources/FreeBSD-src-plus-RELENG_26_03/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
sysctl_register_oid: can't re-use a leaf (machdep.hwpstate_pkg_ctrl)!
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.21-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0xc69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 10737418240 (10240 MB)
avail memory = 8251604992 (7869 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <CORE   COREBOOT>
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 1
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 2 3
TCP_ratelimit: Is now initialized
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8078b160, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8078b210, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8078b2c0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807aa9c0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807aaa70, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff807aab20, 0) error 1
random: entropy device external interface
wlan: mac acl policy registered
kbd0 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 16.0.
netgate0: <Netgate 7100>
netgate0: version: 0.2
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf5700-0xf571e
smbios0: Entry point: v2.1 (32-bit), Version: 2.7
acpi0: <CORE COREBOOT>
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <processor> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> mem 0xdfe00000-0xdfe1ffff irq 20 at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) I350 (Copper)> port 0x2000-0x201f mem 0xded00000-0xded7ffff,0xdf100000-0xdf103fff irq 19 at device 0.0 on pci2
igb0: EEPROM V1.63-0 Option ROM V1-b924-p0 eTrack 0x800009fb
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
<6>igb0: Ethernet address: 80:61:5f:07:fb:90
<6>igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) I350 (Copper)> port 0x2020-0x203f mem 0xdee00000-0xdee7ffff,0xdf104000-0xdf107fff irq 16 at device 0.1 on pci2
igb1: EEPROM V1.63-0 Option ROM V1-b924-p0 eTrack 0x800009fb
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
<6>igb1: Ethernet address: 80:61:5f:07:fb:91
<6>igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) I350 (Copper)> port 0x2040-0x205f mem 0xdef00000-0xdef7ffff,0xdf108000-0xdf10bfff irq 17 at device 0.2 on pci2
igb2: EEPROM V1.63-0 Option ROM V1-b924-p0 eTrack 0x800009fb
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 4 RX queues 4 TX queues
igb2: Using MSI-X interrupts with 5 vectors
<6>igb2: Ethernet address: 80:61:5f:07:fb:92
<6>igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) I350 (Copper)> port 0x2060-0x207f mem 0xdf000000-0xdf07ffff,0xdf10c000-0xdf10ffff irq 18 at device 0.3 on pci2
igb3: EEPROM V1.63-0 Option ROM V1-b924-p0 eTrack 0x800009fb
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 4 RX queues 4 TX queues
igb3: Using MSI-X interrupts with 5 vectors
<6>igb3: Ethernet address: 80:61:5f:07:fb:93
<6>igb3: netmap queues/slots: TX 4/1024, RX 4/1024
pcib3: <ACPI PCI-PCI bridge> mem 0xdfe20000-0xdfe3ffff irq 22 at device 16.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> mem 0xdfe40000-0xdfe5ffff irq 23 at device 17.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ahci0: <Intel Denverton AHCI SATA controller> port 0x3020-0x3027,0x3028-0x302b,0x3000-0x301f mem 0xdfe74000-0xdfe75fff,0xdfe7c000-0xdfe7c0ff,0xdfe7a000-0xdfe7a7ff irq 21 at device 20.0 on pci0
ahci0: AHCI v1.31 with 5 6Gbps ports, Port Multiplier supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
xhci0: <Intel Denverton USB 3.0 controller> mem 0xdfe60000-0xdfe6ffff irq 19 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: xECP capabilities <PROTO,PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG>
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 22.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib0: no PRT entry for 0.22.INTB
ix0: <Intel(R) X553 N (SFP+)> mem 0xde200000-0xde3fffff,0xde600000-0xde603fff irq 16 at device 0.0 on pci5
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 4 RX queues 4 TX queues
ix0: Using MSI-X interrupts with 5 vectors
ix0: allocated for 4 queues
ix0: allocated for 4 rx queues
<6>ix0: Ethernet address: 00:08:a2:11:cc:3f
ix0: nvm 0.58.0 eTrack 0x8000084b
<6>ix0: netmap queues/slots: TX 4/2048, RX 4/2048
ix1: <Intel(R) X553 N (SFP+)> mem 0xde400000-0xde5fffff,0xde604000-0xde607fff irq 10 at device 0.1 on pci5
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 4 RX queues 4 TX queues
ix1: Using MSI-X interrupts with 5 vectors
ix1: allocated for 4 queues
ix1: allocated for 4 rx queues
<6>ix1: Ethernet address: 00:08:a2:11:cc:40
ix1: nvm 0.58.0 eTrack 0x8000084b
<6>ix1: netmap queues/slots: TX 4/2048, RX 4/2048
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 23.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib0: no PRT entry for 0.23.INTB
ix2: <Intel(R) X553 L (KR Backplane)> mem 0xde800000-0xde9fffff,0xdec00000-0xdec03fff irq 17 at device 0.0 on pci6
ix2: Using 2048 TX descriptors and 2048 RX descriptors
ix2: Using 4 RX queues 4 TX queues
ix2: Using MSI-X interrupts with 5 vectors
ix2: allocated for 4 queues
ix2: allocated for 4 rx queues
<6>ix2: Ethernet address: 00:08:a2:11:cc:41
ix2: nvm 0.58.0 eTrack 0x80000863
mdio0: <MDIO> on ix2
e6000sw0: <Marvell 88E6190> on mdio0
e6000sw0: single-chip addressing mode
miibus0: <MII bus> on e6000sw0
e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on e6000sw0
e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 2 on miibus1
e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on e6000sw0
e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 3 on miibus2
e1000phy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on e6000sw0
e1000phy3: <Marvell 88E1000 Gigabit PHY> PHY 4 on miibus3
e1000phy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus4: <MII bus> on e6000sw0
e1000phy4: <Marvell 88E1000 Gigabit PHY> PHY 5 on miibus4
e1000phy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus5: <MII bus> on e6000sw0
e1000phy5: <Marvell 88E1000 Gigabit PHY> PHY 6 on miibus5
e1000phy5:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus6: <MII bus> on e6000sw0
e1000phy6: <Marvell 88E1000 Gigabit PHY> PHY 7 on miibus6
e1000phy6:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus7: <MII bus> on e6000sw0
e1000phy7: <Marvell 88E1000 Gigabit PHY> PHY 8 on miibus7
e1000phy7:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
e6000sw0: switch is ready.
etherswitch0: <Switch controller> on e6000sw0
<6>ix2: netmap queues/slots: TX 4/2048, RX 4/2048
ix3: <Intel(R) X553 L (KR Backplane)> mem 0xdea00000-0xdebfffff,0xdec04000-0xdec07fff irq 10 at device 0.1 on pci6
ix3: Using 2048 TX descriptors and 2048 RX descriptors
ix3: Using 4 RX queues 4 TX queues
ix3: Using MSI-X interrupts with 5 vectors
ix3: allocated for 4 queues
ix3: allocated for 4 rx queues
<6>ix3: Ethernet address: 00:08:a2:11:cc:42
ix3: nvm 0.58.0 eTrack 0x80000863
<6>ix3: netmap queues/slots: TX 4/2048, RX 4/2048
pci0: <simple comms> at device 24.0 (no driver attached)
sdhci_pci0: <Intel Denverton eMMC 5.0 Controller> mem 0xdfe77000-0xdfe77fff,0xdfe78000-0xdfe78fff irq 16 at device 28.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
uart: ns8250: UART FCR is broken (0x1)
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 19 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart: ns8250: UART FCR is broken (0x1)
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 18 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc0fff,0xee800-0xeffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
cpufreq0: <CPU frequency control> on cpu0
cpufreq1: <CPU frequency control> on cpu1
cpufreq2: <CPU frequency control> on cpu2
cpufreq3: <CPU frequency control> on cpu3
Timecounter "TSC-low" frequency 1100000136 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
mmcsd0: 31GB <MMCHC DA4032 0.1 SN F7C97F40 MFG 12/2019 by 69 0x0000> at mmc0 50.0MHz/8bit/65535-block
mmcsd0boot0: 4MB partition 1 at mmcsd0
mmcsd0boot1: 4MB partition 2 at mmcsd0
mmcsd0rpmb: 17MB partition 3 at mmcsd0
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA THNSNK256GVN8 M.2 2280 256GB K8DC4101> ACS-3 ATA SATA 3.x device
ada0: Serial Number 97IB6008KLQU
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
Trying to mount root from zfs:pfSense/ROOT/default []...
uhub0: 8 ports with 8 removable, self powered
<6>e6000sw0port1: link state changed to UP
<6>e6000sw0port2: link state changed to UP
<6>e6000sw0port3: link state changed to UP
<6>e6000sw0port4: link state changed to UP
<6>e6000sw0port5: link state changed to UP
<6>e6000sw0port6: link state changed to DOWN
<6>e6000sw0port7: link state changed to DOWN
<6>e6000sw0port8: link state changed to DOWN
<6>e6000sw0port7: link state changed to UP
<118>Configuring crash dumps...
<118>Using /dev/gpt/swap1 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>Mounting ZFS boot environment...done.
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___      _
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \   _| |_
<118>| |_) |  _\__ \  __/ | | \__ \  __/  |_   _|
<118>| .__/|_| |___/\___|_| |_|___/\___|    |_|
<118>|_|
<118>
<118>
<118>Welcome to Netgate pfSense Plus 26.03-RELEASE...
<118>
<118>Checking dump device /dev/gpt/swap1 for crash dumps ... no crash dumps on /dev/gpt/swap1.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.42/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p2 ada0p3 ada0p4 mmcsd0s1 mmcsd0s1a mmcsd0s1b
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x14000c69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
<118>Done.
<118> done.
<118>Initializing.................... done.
<118>Starting device manager (devd)...
ichsmb0: <Intel Denverton SMBus controller> port 0xefa0-0xefbf mem 0xdfe80000-0xdfe800ff irq 23 at device 31.4 on pci0
smbus0: <System Management Bus> on ichsmb0
<118>done.
<118>Loading configuration...done.
<118>Updating configuration......2026-04-06T12:37:33.564006+02:00 - php-fpm 603 - - INFO Ignoring link event during boot sequence.
<118>2026-04-06T12:37:33.564021+02:00 - php-fpm 604 - - INFO Ignoring link event during boot sequence.
<118>2026-04-06T12:37:33.809393+02:00 - php-fpm 603 - - INFO Ignoring link event during boot sequence.
<118>2026-04-06T12:37:33.809410+02:00 - php-fpm 604 - - INFO Ignoring link event during boot sequence.
<118>2026-04-06T12:37:34.055116+02:00 - php-fpm 603 - - INFO Ignoring link event during boot sequence.
<118>2026-04-06T12:37:34.055116+02:00 - php-fpm 604 - - INFO Ignoring link event during boot sequence.
<118>2026-04-06T12:37:34.290760+02:00 - php-fpm 1530 - - INFO Ignoring link event during boot sequence.
<118>2026-04-06T12:37:34.308722+02:00 - php-fpm 604 - - INFO Ignoring link event during boot sequence.
<118>2026-04-06T12:37:34.324934+02:00 - php-fpm 603 - - INFO Ignoring link event during boot sequence.
<118>done.
<118>Checking config backups consistency...done.
<118>Loading cryptographic accelerator drivers...
qat0: <Intel c3xxx QuickAssist> mem 0xdfc00000-0xdfc3ffff,0xdfc40000-0xdfc7ffff irq 18 at device 0.0 on pci1
qat0: qat_dev0 started 6 acceleration engines
qat0: FW version: 4.18.0
qat0: Excessive clock measure delay
qat_ocf0: <QAT engine>
<118>done.
<118>Setting up extended sysctls...done.
<118>Executing deferred package installation scripts...Running last steps of bandwidthd installation.
<118>Saving updated package information...
<118>overwrite!
<118>Loading package configuration... done.
<118>Configuring package components...
<118>Loading package instructions...
<118>Custom commands...
<118>Executing custom_php_install_command()...done.
<118>Executing custom_php_resync_config_command()...done.
<118>Menu items... done.
<118>Services... done.
<118>Writing configuration... 2026-04-06T12:37:37.135049+02:00 - bandwidthd 14327 - - Monitoring subnet 192.168.128.0 with netmask 255.255.192.0
<118>2026-04-06T12:37:37.135408+02:00 - bandwidthd 14327 - - Monitoring subnet 192.168.3.0 with netmask 255.255.255.0
<118>2026-04-06T12:37:37.135444+02:00 - bandwidthd 14327 - - Monitoring subnet 192.168.4.0 with netmask 255.255.255.0
<118>2026-04-06T12:37:37.135478+02:00 - bandwidthd 14327 - - Monitoring subnet 192.168.1.0 with netmask 255.255.255.0
<118>2026-04-06T12:37:37.135511+02:00 - bandwidthd 14327 - - Monitoring subnet 192.168.254.0 with netmask 255.255.255.0
<118>2026-04-06T12:37:37.135544+02:00 - bandwidthd 14327 - - Monitoring subnet 192.168.2.0 with netmask 255.255.255.0
<118>2026-04-06T12:37:37.135577+02:00 - bandwidthd 14327 - - Monitoring subnet 193.97.129.0 with netmask 255.255.255.0
<118>2026-04-06T12:37:37.155652+02:00 - bandwidthd 14910 - - Opening lagg0.4090
<118>2026-04-06T12:37:37.156026+02:00 - bandwidthd 14589 - - Opening lagg0.4090
<118>2026-04-06T12:37:37.156221+02:00 - bandwidthd 14910 - - lagg0.4090: No such device exists (No such device exists)
<118>2026-04-06T12:37:37.155924+02:00 - bandwidthd 14985 - - Opening lagg0.4090
<118>2026-04-06T12:37:37.156482+02:00 - bandwidthd 14589 - - lagg0.4090: No such device exists (No such device exists)
<118>2026-04-06T12:37:37.156557+02:00 - bandwidthd 15124 - - Opening lagg0.4090
<118>2026-04-06T12:37:37.156599+02:00 - bandwidthd 14985 - - lagg0.4090: No such device exists (No such device exists)
<118>2026-04-06T12:37:37.156839+02:00 - bandwidthd 15124 - - lagg0.4090: No such device exists (No such device exists)
<118>done.
<118>Running last steps of Nexus installation.
<118>Saving updated package information...
<118>overwrite!
<118>Loading package configuration... done.
<118>Configuring package components...
<118>Custom commands...
<118>Writing configuration... done.
<118>Running last steps of ntopng installation.
<118>Saving updated package information...
<118>overwrite!
<118>Loading package configuration... done.
<118>Configuring package components...
<118>Loading package instructions...
<118>Custom commands...
<118>Executing custom_php_install_command()...done.
<118>Executing custom_php_resync_config_command()...done.
<118>Menu items... done.
<118>Services... done.
<118>Writing configuration... done.
<118>Running last steps of openvpn-client-export installation.
<118>Saving updated package information...
<118>overwrite!
<118>Loading package configuration... done.
<118>Configuring package components...
<118>Loading package instructions...
<118>Custom commands...
<118>Executing custom_php_install_command()...done.
<118>Writing configuration... done.
<118>Running last steps of snort installation.
<118>Saving updated package information...
<118>overwrite!
<118>Loading package configuration... done.
<118>Configuring package components...
<118>Loading package instructions...
<118>Custom commands...
<118>Executing custom_php_install_command()...Saved settings detected.
<118>Migrating settings to new configuration... done.
<118>Generating configuration for LAN...route: route has not been found
<118> done.
<118>Generating configuration for WAN...route: route has not been found
<118> done.
<118>Generating configuration for SFIDMZ...route: route has not been found
<118> done.
<118>Generating configuration for SFITMGMNT...route: route has not been found
<118> done.
<118>Generating snort.sh script in /usr/local/etc/rc.d/... done.
<118>Finished rebuilding Snort configuration files.
<118>done.
<118>Executing custom_php_resync_config_command()...done.
<118>Menu items... done.
<118>Services... done.
<118>Writing configuration... done.
<118>Please visit Services - Snort - Interfaces tab first and select your desired rules. Afterwards visit the Updates tab to download your configured rulesets.done.
<118>Executing early shell commands...done.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Configuring switch...
<6>e6000sw0port1: link state changed to DOWN
<6>e6000sw0port2: link state changed to DOWN
<6>e6000sw0port3: link state changed to DOWN
<6>e6000sw0port4: link state changed to DOWN
<6>e6000sw0port1: link state changed to UP
<6>e6000sw0port5: link state changed to DOWN
<6>e6000sw0port2: link state changed to UP
<6>e6000sw0port3: link state changed to UP
<6>e6000sw0port7: link state changed to DOWN
<6>e6000sw0port4: link state changed to UP
<6>e6000sw0port5: link state changed to UP
<118>done.
<118>Setting up interfaces microcode...done.
<118>Configuring loopback interface...done.
<118>Configuring LAGG interfaces...
<6>lagg0: IPv6 addresses on ix2 have been removed before adding it as a member to prevent IPv6 address scope violation.
<6>lagg0: link state changed to DOWN
<6>lagg0: IPv6 addresses on ix3 have been removed before adding it as a member to prevent IPv6 address scope violation.
<6>vlan0: changing name to 'lagg0.4090'
<6>vlan1: changing name to 'lagg0.4091'
<6>vlan2: changing name to 'lagg0.4080'
<6>vlan3: changing name to 'lagg0.4081'
<6>ix2: link state changed to UP
<6>lagg0: link state changed to UP
<6>lagg0.4080: link state changed to UP
<6>lagg0.4081: link state changed to UP
<6>lagg0.4090: link state changed to UP
<6>lagg0.4091: link state changed to UP
<6>vlan4: changing name to 'lagg0.4082'
<6>vlan5: changing name to 'lagg0.4084'
<118>done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'lagg0.4090'
<6>vlan1: changing name to 'lagg0.4091'
<6>vlan2: changing name to 'lagg0.4080'
<6>vlan3: changing name to 'lagg0.4081'
<6>ix3: link state changed to UP
<6>vlan4: changing name to 'lagg0.4082'
<6>vlan5: changing name to 'lagg0.4084'
<118>done.
<118>Configuring WAN interface...done.
<118>Configuring LAN interface...done.
<118>Configuring SFBCKP interface...
<6>e6000sw0port7: link state changed to UP
<118>done.
<118>Configuring SFIDMZ interface...done.
<118>Configuring SFITMGMNT interface...done.
<118>Configuring SFWLAN interface...done.
<118>Configuring SFEOLSRV interface...done.
<118>Configuring CARP settings...done.
<118>Starting Secure Shell Services...done.
<118>Syncing OpenVPN settings...
<6>tun3: changing name to 'ovpns3'
<6>tun1: changing name to 'ovpns1'
<6>ovpns3: link state changed to UP
<118>done.
<6>ovpns1: link state changed to UP
<118>route: route has not been found
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall.....
<6>ix0: link state changed to UP
<118>.done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Synchronizing user settings...done.
<118>Configuring CRON...done.
<118>Bootstrapping clock...done.
<118>Starting NTP Server...done.
<118>Starting webConfigurator...done.
<118>Starting DHCP Relay service...Configuring firewall......done.
<118>Configuring IPsec VPN... route: route has not been found
<118>done
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package snort...done.
<118> Starting package ntopng...done.
<118> Starting package bandwidthd...done.
<118> Starting package Netgate Nexus...done.
<6>ix2: promiscuous mode enabled
<6>ix3: promiscuous mode enabled
<6>lagg0: promiscuous mode enabled
<6>lagg0.4090: promiscuous mode enabled
<118>Netgate pfSense Plus 26.03-RELEASE amd64 20260401-1720
<118>Bootup complete
<118>Performing automatic boot verification...done.
<6>ix2: promiscuous mode disabled
<6>ix3: promiscuous mode disabled
<6>lagg0: promiscuous mode disabled
<6>lagg0.4090: promiscuous mode disabled
<6>ix0: link state changed to DOWN
<6>ix0: link state changed to UP


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 04
fault virtual address	= 0x30
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80eb2b66
stack pointer	        = 0x0:0xfffffe008ca45270
frame pointer	        = 0x0:0xfffffe008ca452e0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (if_io_tqg_0)
rdi: fffffe000dfada00 rsi: fffffe008ca45290 rdx: 0000000000000001
rcx: 00000000000000af  r8: 0000000000000002  r9: fffff8010ea76e60
rax: 0000000000000000 rbx: fffff8010ea76e00 rbp: fffffe008ca452e0
r10: 0000000057db7cec r11: fffff801fbd87ddd r12: 0000000000000036
r13: fffff801bfff7500 r14: 0000000000000000 r15: fffff801be8f5e00
trap number		= 12
panic: page fault
cpuid = 0
time = 1775473232
KDB: enter: panic
