---<<BOOT>>---
Copyright (c) 1992-2026 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 16.0-CURRENT #36 plus-RELENG_26_03-n256531-4923e82e59d1: Fri Mar 20 18:22:49 UTC 2026
    root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-Plus-snapshots-26_03-main/obj/amd64/TVcqnR7U/var/jenkins/workspace/pfSense-Plus-snapshots-26_03-main/sources/FreeBSD-src-plus-RELENG_26_03/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
sysctl_register_oid: can't re-use a leaf (machdep.hwpstate_pkg_ctrl)!
VT(efifb): resolution 800x600
CPU: Intel(R) Xeon(R) CPU D-1521 @ 2.40GHz (2400.10-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x50663  Family=0x6  Model=0x56  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8155082752 (7777 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
Launching APs: 1 6 2 4 7 3 5
TCP_ratelimit: Is now initialized
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8078b160, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8078b210, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8078b2c0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807aa9c0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807aaa70, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff807aab20, 0) error 1
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 16.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
netgate0: <unknown hardware>
netgate0: version: 0.2
smbios0: <System Management BIOS> at iomem 0xf0600-0xf0617
smbios0: Entry point: v3 (64-bit), Version: 3.0
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci1
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
nvme0: <Generic NVMe Device> mem 0xfb600000-0xfb603fff irq 26 at device 0.0 numa-domain 0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci1
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci1
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe020-0xe03f mem 0xfb180000-0xfb1fffff,0xfb204000-0xfb207fff irq 40 at device 0.0 numa-domain 0 on pci4
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 4 RX queues 4 TX queues
ix0: Using MSI-X interrupts with 5 vectors
ix0: allocated for 4 queues
ix0: allocated for 4 rx queues
<6>ix0: Ethernet address: 90:e2:ba:dd:66:14
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: eTrack 0x00015e0b
<6>ix0: netmap queues/slots: TX 4/2048, RX 4/2048
ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe000-0xe01f mem 0xfb100000-0xfb17ffff,0xfb200000-0xfb203fff irq 44 at device 0.1 numa-domain 0 on pci4
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 4 RX queues 4 TX queues
ix1: Using MSI-X interrupts with 5 vectors
ix1: allocated for 4 queues
ix1: allocated for 4 rx queues
<6>ix1: Ethernet address: 90:e2:ba:dd:66:15
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: eTrack 0x00015e0b
<6>ix1: netmap queues/slots: TX 4/2048, RX 4/2048
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xfb700000-0xfb70ffff irq 19 at device 20.0 numa-domain 0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
xhci0: xECP capabilities <PROTO,PROTO,VEND(c1),VEND(c0),LEGACY>
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms> at device 22.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci5
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 16 at device 0.0 numa-domain 0 on pci6
vgapci0: Boot video device
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci1
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
igb0: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xfb400000-0xfb47ffff,0xfb480000-0xfb483fff irq 18 at device 0.0 numa-domain 0 on pci7
igb0: EEPROM V3.16-0 eTrack 0x800004d6
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
<6>igb0: Ethernet address: d0:50:99:c1:65:6b
<6>igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci1
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
igb1: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xfb300000-0xfb37ffff,0xfb380000-0xfb383fff irq 19 at device 0.0 numa-domain 0 on pci8
igb1: EEPROM V3.16-0 eTrack 0x800004d6
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
<6>igb1: Ethernet address: d0:50:99:c1:65:6c
<6>igb1: netmap queues/slots: TX 4/1024, RX 4/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xfb713000-0xfb7133ff irq 18 at device 29.0 numa-domain 0 on pci1
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfb712000-0xfb7127ff irq 16 at device 31.2 numa-domain 0 on pci1
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
cpufreq0: <CPU frequency control> numa-domain 0 on cpu0
cpufreq1: <CPU frequency control> numa-domain 0 on cpu1
cpufreq2: <CPU frequency control> numa-domain 0 on cpu2
cpufreq3: <CPU frequency control> numa-domain 0 on cpu3
cpufreq4: <CPU frequency control> numa-domain 0 on cpu4
cpufreq5: <CPU frequency control> numa-domain 0 on cpu5
cpufreq6: <CPU frequency control> numa-domain 0 on cpu6
cpufreq7: <CPU frequency control> numa-domain 0 on cpu7
Timecounter "TSC-low" frequency 1199998985 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 numa-domain 0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 numa-domain 0 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
nvme_sim0: <nvme cam> numa-domain 0 on nvme0
(noperiph:nvme0:0:0:1): rescan already queued
nda0 at nvme0 bus 0 scbus7 target 0 lun 1
nda0: <INTEL SSDPEK1A058GA U5110550 PHOC1464001Y058A>
nda0: Serial Number PHOC1464001Y058A
nda0: nvme version 1.1
nda0: 56245MB (115189760 512 byte sectors)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
Trying to mount root from zfs:pfSense/ROOT/default []...
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 numa-domain 0 on uhub1
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.2: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0
uslcom0 numa-domain 0 on uhub0
uslcom0: <Silicon Labs CP2102 USB to UART Bridge Controller, class 0/0, rev 1.10/1.00, addr 1> on usbus0
uhub2: 4 ports with 4 removable, self powered
<118>Configuring crash dumps...
<118>Using /dev/gpt/swap1 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>Mounting ZFS boot environment...done.
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___      _
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \   _| |_
<118>| |_) |  _\__ \  __/ | | \__ \  __/  |_   _|
<118>| .__/|_| |___/\___|_| |_|___/\___|    |_|
<118>|_|
<118>
<118>
<118>Welcome to Netgate pfSense Plus 26.03-RELEASE...
<118>
<118>Checking dump device /dev/gpt/swap1 for crash dumps ... found data, saving.
<118>savecore 271 - - reboot after panic: page fault
<118>savecore 271 - - writing core to /var/crash/textdump.tar.0
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/freeradius-3.2.8 /usr/local/lib/ipsec /usr/local/lib/mysql /usr/local/lib/perl5/5.42/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php85...done.
<118>External config loader 1.0 is now starting... nda0p1 nda0p2 nda0p3 nda0p4
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Xeon(R) CPU D-1521 @ 2.40GHz (2400.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x50663  Family=0x6  Model=0x56  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
<118>Done.
<118> done.
<118>Initializing.................... done.
<118>Starting device manager (devd)...
ichsmb0: <Intel Lynx Point SMBus controller> port 0xf000-0xf01f mem 0xfb711000-0xfb7110ff irq 18 at device 31.3 numa-domain 0 on pci1
smbus0: <System Management Bus> numa-domain 0 on ichsmb0
<118>done.
<118>Loading configuration...done.
<118>Updating configuration...done.
<118>Checking config backups consistency...done.
<118>Loading cryptographic accelerator drivers...
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
<118>done.
<118>Setting up extended sysctls...done.
<118>Executing early shell commands...done.
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Setting up interfaces microcode...done.
<118>Configuring loopback interface...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'ix1.10'
<6>vlan1: changing name to 'ix1.20'
<6>vlan2: changing name to 'ix1.30'
<6>vlan3: changing name to 'ix1.40'
<6>vlan4: changing name to 'ix1.50'
<6>vlan5: changing name to 'ix1.60'
<6>vlan6: changing name to 'ix1.70'
<6>vlan7: changing name to 'ix1.80'
<6>vlan8: changing name to 'ix1.90'
<118>done.
<118>Configuring WAN interface...
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>igb1: link state changed to UP
<118>done.
<118>Configuring MANAGEMENT interface...done.
<118>Configuring LAN interface...done.
<118>Configuring GUEST interface...done.
<118>Configuring CAMERAS interface...done.
<118>Configuring WEBSERVERS interface...done.
<118>Configuring IOT interface...done.
<118>Configuring MILAPT interface...done.
<118>Configuring SECURE interface...done.
<118>Configuring IPMI interface...done.
<118>Configuring BENCH interface...done.
<118>Configuring CARP settings...done.
<118>Starting Secure Shell Services...done.
<118>Syncing OpenVPN settings...
<6>tun2: changing name to 'ovpns2'
<118>done.
<6>ovpns2: link state changed to UP
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...route: route has not been found
<118>done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Configuring CRON...done.
<118>Bootstrapping clock...done.
<118>Starting NTP Server...done.
<118>Starting webConfigurator...done.
<118>Starting DHCP service...done.
<118>Configuring firewall......done.
<118>Starting SNMP daemon... done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Configuring filter for dynamic IPsec VPN hosts... done
<118>Starting CRON... done.
<118> Starting package Service Watchdog...done.
<118> Starting package nut...done.
<118> Starting package Traffic Totals...done.
<118> Starting package freeradius3...done.
<118> Starting package pfBlockerNG-devel...done.
<118> Starting package acme...done.
<118> Starting package iperf...done.
<118> Starting package System Patches...done.
<118> Starting package Zabbix Agent 7...done.
<118> Starting package suricata...done.
<118> Starting package Netgate Nexus...done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
<118> Starting /usr/local/etc/rc.d/shutdown.nut.sh...done.
<118> Starting /usr/local/etc/rc.d/vnstatd.sh...done.
<118> Starting /usr/local/etc/rc.d/zabbix_agentd.sh...done.
<118>Netgate pfSense Plus 26.03-RELEASE amd64 20260401-1720
<118>Bootup complete
<118>Performing automatic boot verification...done.
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1: promiscuous mode enabled
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1.40: promiscuous mode enabled
<6>ix1.70: promiscuous mode enabled
<6>ix1.40: promiscuous mode disabled
<6>ix1.70: promiscuous mode disabled
<6>ix1: promiscuous mode disabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1: promiscuous mode enabled
<6>ix1.40: promiscuous mode enabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1.70: promiscuous mode enabled
<6>ix1.40: promiscuous mode disabled
<6>ix1.70: promiscuous mode disabled
<6>ix1: promiscuous mode disabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1: promiscuous mode enabled
<6>ix1.40: promiscuous mode enabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1.70: promiscuous mode enabled
<6>ix1.40: promiscuous mode disabled
<6>ix1.70: promiscuous mode disabled
<6>ix1: promiscuous mode disabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1: promiscuous mode enabled
<6>ix1.40: promiscuous mode enabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1.70: promiscuous mode enabled
<6>ix1.40: promiscuous mode disabled
<6>ix1.70: promiscuous mode disabled
<6>ix1: promiscuous mode disabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1: promiscuous mode enabled
<6>ix1.40: promiscuous mode enabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1.70: promiscuous mode enabled
<6>ix1.40: promiscuous mode disabled
<6>ix1.70: promiscuous mode disabled
<6>ix1: promiscuous mode disabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1: promiscuous mode enabled
<6>ix1.40: promiscuous mode enabled
<6>ix1: link state changed to DOWN
<6>ix1.50: link state changed to DOWN
<6>ix1.70: link state changed to DOWN
<6>ix1.80: link state changed to DOWN
<6>ix1.20: link state changed to DOWN
<6>ix1.40: link state changed to DOWN
<6>ix1.10: link state changed to DOWN
<6>ix1.90: link state changed to DOWN
<6>ix1.60: link state changed to DOWN
<6>ix1.30: link state changed to DOWN
<6>ix1: link state changed to UP
<6>ix1.50: link state changed to UP
<6>ix1.70: link state changed to UP
<6>ix1.80: link state changed to UP
<6>ix1.20: link state changed to UP
<6>ix1.40: link state changed to UP
<6>ix1.10: link state changed to UP
<6>ix1.90: link state changed to UP
<6>ix1.60: link state changed to UP
<6>ix1.30: link state changed to UP
<6>ix1.70: promiscuous mode enabled


Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 02
fault virtual address	= 0x30
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80eb2b66
stack pointer	        = 0x28:0xfffffe008cf77a20
frame pointer	        = 0x28:0xfffffe008cf77a90
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (swi1: netisr 7)
rdi: fffffe0082786a00 rsi: fffffe008cf77a40 rdx: 0000000000000001
rcx: 000000000000b7e3  r8: 0000000000000002  r9: 0000000023300042
rax: 0000000000000000 rbx: fffff80032837c00 rbp: fffffe008cf77a90
r10: 0000000000000010 r11: fffffe008e559200 r12: 0000000000000042
r13: fffff80001495000 r14: 0000000000000000 r15: fffff8000399f600
trap number		= 12
panic: page fault
cpuid = 2
time = 1776976140
KDB: enter: panic
