ome to pfSense 2.5.1-RELEASE...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Setting vital flag on pfSense-upgrade... done.
<118>External config loader 1.0 is now starting... vtbd0p1 vtbd0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.14-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf8bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...
intsmb0: <Intel PIIX4 SMBUS Interface> irq 9 at device 1.3 on pci0
intsmb0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
<118>done.
<118>Loading configuration......done.
<118>Updating configuration....done.
<118>Warning: Configuration references interfaces that do not exist: em0 em1
<118>
<118>Network interface mismatch -- Running interface assignment option.
<6>vtnet0: link state changed to UP
<6>vtnet1: link state changed to UP
<6>vtnet2: link state changed to UP
<6>vtnet3: link state changed to UP
<118>
<118>Valid interfaces are:
<118>
<118>vtnet0  66:6c:d9:bf:99:00 (down) VirtIO Networking Adapter
<118>vtnet1  ea:a0:fe:7e:b8:8e (down) VirtIO Networking Adapter
<118>vtnet2  92:2e:0f:f3:19:48 (down) VirtIO Networking Adapter
<118>vtnet3  8a:2f:8e:1a:ed:9b (down) VirtIO Networking Adapter
<118>
<118>Do VLANs need to be set up first?
<118>If VLANs will not be used, or only for optional interfaces, it is typical to
<118>say no here and use the webConfigurator to configure VLANs later, if required.
<118>
<118>Should VLANs be set up now [y|n]? 
<118>If the names of the interfaces are not known, auto-detection can
<118>be used instead. To use auto-detection, please disconnect all
<118>interfaces before pressing 'a' to begin the process.
<118>
<118>Enter the WAN interface name or 'a' for auto-detection 
<118>(vtnet0 vtnet1 vtnet2 vtnet3 or a): 
<118>Enter the LAN interface name or 'a' for auto-detection 
<118>NOTE: this enables full Firewalling/NAT mode.
<118>(vtnet1 vtnet2 vtnet3 a or nothing if finished): 
<118>Enter the Optional 1 interface name or 'a' for auto-detection
<118>(vtnet2 vtnet3 a or nothing if finished): 
<118>Enter the Optional 2 interface name or 'a' for auto-detection
<118>(vtnet3 a or nothing if finished): 
<118>The interfaces will be assigned as follows:
<118>
<118>WAN  -> vtnet0
<118>LAN  -> vtnet1
<118>OPT1 -> vtnet2
<118>OPT2 -> vtnet3
<118>
<118>Do you want to proceed [y|n]? ..Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...done.
<118>Configuring IPsec VTI interfaces...done.
<118>Warning: Configuration references interfaces that do not exist: em0 em1
<118>
<118>Network interface mismatch -- Running interface assignment option.
<118>
<118>Valid interfaces are:
<118>
<118>vtnet0  66:6c:d9:bf:99:00 (down) VirtIO Networking Adapter
<118>vtnet1  ea:a0:fe:7e:b8:8e (down) VirtIO Networking Adapter
<118>vtnet2  92:2e:0f:f3:19:48 (down) VirtIO Networking Adapter
<118>vtnet3  8a:2f:8e:1a:ed:9b (down) VirtIO Networking Adapter
<118>
<118>Do VLANs need to be set up first?
<118>If VLANs will not be used, or only for optional interfaces, it is typical to
<118>say no here and use the webConfigurator to configure VLANs later, if required.
<118>
<118>Should VLANs be set up now [y|n]? 
<118>If the names of the interfaces are not known, auto-detection can
<118>be used instead. To use auto-detection, please disconnect all
<118>interfaces before pressing 'a' to begin the process.
<118>
<118>Enter the WAN interface name or 'a' for auto-detection 
<118>(vtnet0 vtnet1 vtnet2 vtnet3 or a): 
<118>Enter the LAN interface name or 'a' for auto-detection 
<118>NOTE: this enables full Firewalling/NAT mode.
<118>(vtnet1 vtnet2 vtnet3 a or nothing if finished): 
<118>Enter the Optional 1 interface name or 'a' for auto-detection
<118>(vtnet2 vtnet3 a or nothing if finished): 
<118>The interfaces will be assigned as follows:
<118>
<118>WAN  -> vtnet0
<118>LAN  -> vtnet1
<118>
<118>Do you want to proceed [y|n]? 
<118>Writing configuration...done.
<118>One moment while the settings are reloading... done!
<118>..Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...2021-04-28T19:31:24.599039+00:00  php-fpm 348 - - /rc.newwanip: rc.newwanip: Info: starting on vtnet0.
<118>2021-04-28T19:31:24.599670+00:00  php-fpm 348 - - /rc.newwanip: rc.newwanip: on (IP address: 203.0.113.117) (interface: WAN[wan]) (real interface: vtnet0).
<118>2021-04-28T19:31:24.609687+00:00  php-fpm 348 - - /rc.newwanip: Accept router advertisements on interface vtnet0 
<118>2021-04-28T19:31:24.616448+00:00  php-fpm 348 - - /rc.newwanip: Starting rtsold process
<118>done.
<118>Configuring IPsec VTI interfaces...done.
<118>Checking config backups consistency...done.
<118>Setting up extended sysctls...done.
<118>Setting timezone...done.
<118>Configuring loopback interface...done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...
<6>pflog0: promiscuous mode enabled
<118>done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall......done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>pfSense 2.5.1-RELEASE amd64 Mon Apr 12 07:50:14 EDT 2021
<118>Bootup complete
<7>cannot forward src fe80:2::79cc:227d:406:708e, dst 2600:1901:0:38d7::, nxt 6, rcvif vtnet1, outif vtnet0
<6>pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
All buffers synced.
Uptime: 8m0s
Rebooting...
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE 1b709158e581(RELENG_2_5_0) pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): text 80x25
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.02-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 1073741824 (1024 MB)
avail memory = 971833344 (926 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPCAPIC>
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1100008632 Hz quality 800
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073dd40, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ddf0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073dea0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765730, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807657e0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80765890, 0) error 1
wlan: mac acl policy registered
random: entropy device external interface
module_register_init: MOD_LOAD (vesa, 0xffffffff8140c3e0, 0) error 19
kbd1 at kbdmux0
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
[ath_hal] loaded
000.000052 [4336] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe1a0-0xe1af at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xe0c0-0xe0df irq 11 at device 1.2 on pci0
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0xe0e0-0xe0ff mem 0xf4000000-0xf7ffffff,0xf8000000-0xfbffffff,0xfc510000-0xfc511fff irq 10 at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci0: <VirtIO PCI Balloon adapter> port 0xe100-0xe11f mem 0xfea00000-0xfea03fff irq 11 at device 3.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci0
virtio_pci1: <VirtIO PCI Console adapter> port 0xe080-0xe0bf mem 0xfc512000-0xfc512fff,0xfea04000-0xfea07fff irq 10 at device 9.0 on pci0
vtcon0: <VirtIO Console Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI Block adapter> port 0xe000-0xe07f mem 0xfc513000-0xfc513fff,0xfea08000-0xfea0bfff irq 10 at device 10.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci2
vtblk0: 32768MB (67108864 512 byte sectors)
virtio_pci3: <VirtIO PCI Network adapter> port 0xe120-0xe13f mem 0xfc514000-0xfc514fff,0xfea0c000-0xfea0ffff irq 10 at device 18.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci3
<6>vtnet0: Ethernet address: 66:6c:d9:bf:99:00
<6>vtnet0: netmap queues/slots: TX 1/256, RX 1/128
000.000766 [ 445] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci4: <VirtIO PCI Network adapter> port 0xe140-0xe15f mem 0xfc515000-0xfc515fff,0xfea10000-0xfea13fff irq 11 at device 19.0 on pci0
vtnet1: <VirtIO Networking Adapter> on virtio_pci4
<6>vtnet1: Ethernet address: ea:a0:fe:7e:b8:8e
<6>vtnet1: netmap queues/slots: TX 1/256, RX 1/128
000.000767 [ 445] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci5: <VirtIO PCI Network adapter> port 0xe160-0xe17f mem 0xfc516000-0xfc516fff,0xfea14000-0xfea17fff irq 11 at device 20.0 on pci0
vtnet2: <VirtIO Networking Adapter> on virtio_pci5
<6>vtnet2: Ethernet address: 92:2e:0f:f3:19:48
<6>vtnet2: netmap queues/slots: TX 1/256, RX 1/128
000.000768 [ 445] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci6: <VirtIO PCI Network adapter> port 0xe180-0xe19f mem 0xfc517000-0xfc517fff,0xfea18000-0xfea1bfff irq 10 at device 21.0 on pci0
vtnet3: <VirtIO Networking Adapter> on virtio_pci6
<6>vtnet3: Ethernet address: 8a:2f:8e:1a:ed:9b
<6>vtnet3: netmap queues/slots: TX 1/256, RX 1/128
000.000769 [ 445] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib1: <ACPI PCI-PCI bridge> mem 0xfc518000-0xfc5180ff irq 10 at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xfc519000-0xfc5190ff irq 11 at device 31.0 on pci0
pci2: <ACPI PCI bus> on pcib2
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3: <System Container> port 0xae00-0xae13 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xea800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: CAM usbus0
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 617MB (316006 2048 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/vtbd0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.5.1-RELEASE...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... vtbd0p1 vtbd0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.02-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf8bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...
intsmb0: <Intel PIIX4 SMBUS Interface> irq 9 at device 1.3 on pci0
intsmb0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
<118>done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency......done.
<118>Setting up extended sysctls...done.
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring LAN interface...
<6>vtnet1: link state changed to UP
<118>done.
<118>Configuring WAN interface...
<6>vtnet0: link state changed to UP
<118>done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<118>Configuring firewall.
<6>pflog0: promiscuous mode enabled
<118>.....done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall......done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>pfSense 2.5.1-RELEASE amd64 Mon Apr 12 07:50:14 EDT 2021
<118>Bootup complete
<6>pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
All buffers synced.
Uptime: 6m10s
Rebooting...
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE 1b709158e581(RELENG_2_5_0) pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): text 80x25
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.01-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 1073741824 (1024 MB)
avail memory = 971833344 (926 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPCAPIC>
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1100007000 Hz quality 800
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073dd40, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ddf0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073dea0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765730, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807657e0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80765890, 0) error 1
wlan: mac acl policy registered
random: entropy device external interface
module_register_init: MOD_LOAD (vesa, 0xffffffff8140c3e0, 0) error 19
kbd1 at kbdmux0
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
[ath_hal] loaded
000.000052 [4336] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe1a0-0xe1af at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xe0c0-0xe0df irq 11 at device 1.2 on pci0
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0xe0e0-0xe0ff mem 0xf4000000-0xf7ffffff,0xf8000000-0xfbffffff,0xfc510000-0xfc511fff irq 10 at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci0: <VirtIO PCI Balloon adapter> port 0xe100-0xe11f mem 0xfea00000-0xfea03fff irq 11 at device 3.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci0
virtio_pci1: <VirtIO PCI Console adapter> port 0xe080-0xe0bf mem 0xfc512000-0xfc512fff,0xfea04000-0xfea07fff irq 10 at device 9.0 on pci0
vtcon0: <VirtIO Console Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI Block adapter> port 0xe000-0xe07f mem 0xfc513000-0xfc513fff,0xfea08000-0xfea0bfff irq 10 at device 10.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci2
vtblk0: 32768MB (67108864 512 byte sectors)
virtio_pci3: <VirtIO PCI Network adapter> port 0xe120-0xe13f mem 0xfc514000-0xfc514fff,0xfea0c000-0xfea0ffff irq 10 at device 18.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci3
<6>vtnet0: Ethernet address: 66:6c:d9:bf:99:00
<6>vtnet0: netmap queues/slots: TX 1/256, RX 1/128
000.000766 [ 445] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci4: <VirtIO PCI Network adapter> port 0xe140-0xe15f mem 0xfc515000-0xfc515fff,0xfea10000-0xfea13fff irq 11 at device 19.0 on pci0
vtnet1: <VirtIO Networking Adapter> on virtio_pci4
<6>vtnet1: Ethernet address: ea:a0:fe:7e:b8:8e
<6>vtnet1: netmap queues/slots: TX 1/256, RX 1/128
000.000767 [ 445] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci5: <VirtIO PCI Network adapter> port 0xe160-0xe17f mem 0xfc516000-0xfc516fff,0xfea14000-0xfea17fff irq 11 at device 20.0 on pci0
vtnet2: <VirtIO Networking Adapter> on virtio_pci5
<6>vtnet2: Ethernet address: 92:2e:0f:f3:19:48
<6>vtnet2: netmap queues/slots: TX 1/256, RX 1/128
000.000768 [ 445] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci6: <VirtIO PCI Network adapter> port 0xe180-0xe19f mem 0xfc517000-0xfc517fff,0xfea18000-0xfea1bfff irq 10 at device 21.0 on pci0
vtnet3: <VirtIO Networking Adapter> on virtio_pci6
<6>vtnet3: Ethernet address: 8a:2f:8e:1a:ed:9b
<6>vtnet3: netmap queues/slots: TX 1/256, RX 1/128
000.000769 [ 445] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib1: <ACPI PCI-PCI bridge> mem 0xfc518000-0xfc5180ff irq 10 at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xfc519000-0xfc5190ff irq 11 at device 31.0 on pci0
pci2: <ACPI PCI bus> on pcib2
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3: <System Container> port 0xae00-0xae13 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xea800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: CAM usbus0
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 617MB (316006 2048 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/vtbd0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>Moving pkg database for ram storage
<118>Clearing /root/var/db/pkg
<118>Moving /var/db/pkg to /root/var/db/
<118>Clearing /root/var/cache/pkg
<118>Moving /var/cache/pkg to /root/var/cache/
<118>Dismounting ZFS volume zroot/tmp for RAM disk
<118>Dismounting ZFS volume zroot/var for RAM disk
<118>Setting up memory disks... done.
<118>Creating pkg db symlink
<118>Creating pkg cache symlink
<118>Restoring contents of RAM disk store... done.
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.5.1-RELEASE...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>External config loader 1.0 is now starting... vtbd0p1 vtbd0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.01-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf8bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...
intsmb0: <Intel PIIX4 SMBUS Interface> irq 9 at device 1.3 on pci0
intsmb0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
<118>done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.......done.
<118>Setting up extended sysctls...done.
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring WAN interface...
<6>vtnet0: link state changed to UP
<118>done.
<118>Configuring LAN interface...
<6>vtnet1: link state changed to UP
<118>done.
<118>Configuring WAN2 interface...
<6>vtnet2: link state changed to UP
<118>done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun1: changing name to 'ovpns1'
<6>tun5: changing name to 'ovpns5'
<6>ovpns1: link state changed to UP
<6>ovpns5: link state changed to UP
<6>tun2: changing name to 'ovpnc2'
<6>ovpnc2: link state changed to UP
<6>tun6: changing name to 'ovpnc6'
<6>ovpnc6: link state changed to UP
<6>tun7: changing name to 'ovpnc7'
<6>pflog0: promiscuous mode enabled
<6>ovpnc7: link state changed to UP
<118>done.
<118>route: route has not been found
<118>route: route has not been found
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Configuring firewall......done.
<118>Configuring l2tp VPN service... done
<118>Configuring IPsec VPN... route: route has not been found
<118>done
<118>Starting SNMP daemon... done.
<118>Generating RRD graphs...done.
<118>Triggering packages reinstallation in background
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>pfSense 2.5.1-RELEASE amd64 Mon Apr 12 07:50:14 EDT 2021
<118>Bootup complete
calcru: runtime went backwards from 249 usec to 246 usec for pid 26 (zpool-zroot)
calcru: runtime went backwards from 285 usec to 282 usec for pid 26 (zpool-zroot)
calcru: runtime went backwards from 302 usec to 299 usec for pid 12 (intr)
<6>pflog0: promiscuous mode disabled
<6>ovpns1: link state changed to DOWN
<6>ovpnc7: link state changed to DOWN
<6>ovpnc6: link state changed to DOWN
<6>ovpns5: link state changed to DOWN
<6>ovpnc2: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
All buffers synced.
Uptime: 12d18h46m10s
Rebooting...
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE devel-12-n226624-e22beee72a6a pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): text 80x25
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.02-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 1073741824 (1024 MB)
avail memory = 971853824 (926 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPCAPIC>
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1100009384 Hz quality 800
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807380e0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80738190, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80738240, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8075fad0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8075fb80, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8075fc30, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff814000c0, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000052 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe1a0-0xe1af at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xe0c0-0xe0df irq 11 at device 1.2 on pci0
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0xe0e0-0xe0ff mem 0xf4000000-0xf7ffffff,0xf8000000-0xfbffffff,0xfc510000-0xfc511fff irq 10 at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci0: <VirtIO PCI Balloon adapter> port 0xe100-0xe11f mem 0xfea00000-0xfea03fff irq 11 at device 3.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci0
virtio_pci1: <VirtIO PCI Console adapter> port 0xe080-0xe0bf mem 0xfc512000-0xfc512fff,0xfea04000-0xfea07fff irq 10 at device 9.0 on pci0
vtcon0: <VirtIO Console Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI Block adapter> port 0xe000-0xe07f mem 0xfc513000-0xfc513fff,0xfea08000-0xfea0bfff irq 10 at device 10.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci2
vtblk0: 32768MB (67108864 512 byte sectors)
virtio_pci3: <VirtIO PCI Network adapter> port 0xe120-0xe13f mem 0xfc514000-0xfc514fff,0xfea0c000-0xfea0ffff irq 10 at device 18.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci3
<6>vtnet0: Ethernet address: 66:6c:d9:bf:99:00
<6>vtnet0: netmap queues/slots: TX 1/256, RX 1/128
000.000766 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci4: <VirtIO PCI Network adapter> port 0xe140-0xe15f mem 0xfc515000-0xfc515fff,0xfea10000-0xfea13fff irq 11 at device 19.0 on pci0
vtnet1: <VirtIO Networking Adapter> on virtio_pci4
<6>vtnet1: Ethernet address: ea:a0:fe:7e:b8:8e
<6>vtnet1: netmap queues/slots: TX 1/256, RX 1/128
000.000767 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci5: <VirtIO PCI Network adapter> port 0xe160-0xe17f mem 0xfc516000-0xfc516fff,0xfea14000-0xfea17fff irq 11 at device 20.0 on pci0
vtnet2: <VirtIO Networking Adapter> on virtio_pci5
<6>vtnet2: Ethernet address: 92:2e:0f:f3:19:48
<6>vtnet2: netmap queues/slots: TX 1/256, RX 1/128
000.000768 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci6: <VirtIO PCI Network adapter> port 0xe180-0xe19f mem 0xfc517000-0xfc517fff,0xfea18000-0xfea1bfff irq 10 at device 21.0 on pci0
vtnet3: <VirtIO Networking Adapter> on virtio_pci6
<6>vtnet3: Ethernet address: 8a:2f:8e:1a:ed:9b
<6>vtnet3: netmap queues/slots: TX 1/256, RX 1/128
000.000769 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib1: <ACPI PCI-PCI bridge> mem 0xfc518000-0xfc5180ff irq 10 at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xfc519000-0xfc5190ff irq 11 at device 31.0 on pci0
pci2: <ACPI PCI bus> on pcib2
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3: <System Container> port 0xae00-0xae13 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xea800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: CAM usbus0
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 617MB (316006 2048 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/vtbd0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>Dismounting ZFS volume zroot/tmp for RAM disk
<118>Dismounting ZFS volume zroot/var for RAM disk
<118>Setting up memory disks... done.
<118>Creating pkg db symlink
<118>Creating pkg cache symlink
<118>Restoring contents of RAM disk store... done.
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.5.1-RELEASE...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>>>> Locking package pfSense-pkg-Service_Watchdog... done.
<118>>>> Locking package pfSense-pkg-System_Patches... done.
<118>>>> Locking package pfSense-pkg-acme... done.
<118>>>> Locking package pfSense-pkg-frr... done.
<118>>>> Upgrading necessary packages... 
<118>Checking for upgrades (71 candidates): .......... done
<118>Processing candidates (71 candidates): .......... done
<118>Checking integrity... done (2 conflicting)
<118>  - unbound112-1.12.0_1 [pfSense] conflicts with unbound-1.13.1 [installed] on /usr/local/etc/unbound/unbound.conf.sample
<118>  - py38-setuptools-44.0.0_1 [pfSense] conflicts with py37-setuptools-44.0.0 [installed] on /usr/local/bin/easy_install
<118>Checking integrity... done (0 conflicting)
<118>The following 79 package(s) will be affected (of 0 checked):
<118>
<118>Installed packages to be REMOVED:
<118>	py37-ply: 3.11
<118>	py37-setuptools: 44.0.0
<118>	unbound: 1.13.1
<118>
<118>New packages to be INSTALLED:
<118>	py38-ply: 3.11 [pfSense]
<118>	py38-setuptools: 44.0.0_1 [pfSense]
<118>	python38: 3.8.9 [pfSense]
<118>	unbound112: 1.12.0_1 [pfSense]
<118>
<118>Installed packages to be UPGRADED:
<118>	bind-tools: 9.16.12 -> 9.16.15 [pfSense]
<118>	ca_root_nss: 3.58 -> 3.63 [pfSense]
<118>	cpdup: 1.20 -> 1.22 [pfSense]
<118>	curl: 7.74.0 -> 7.76.1 [pfSense]
<118>	devcpu-data: 1.37 -> 1.38 [pfSense]
<118>	dnsmasq: 2.84,1 -> 2.85,1 [pfSense]
<118>	expat: 2.2.10 -> 2.3.0 [pfSense]
<118>	expiretable: 0.6_1 -> 0.6_2 [pfSense]
<118>	frr7: 7.5_1 -> 7.5.1_1 [pfSense]
<118>	frr7-pythontools: 7.5_1 -> 7.5.1_1 [pfSense]
<118>	glib: 2.66.4_1,1 -> 2.66.7_1,1 [pfSense]
<118>	hostapd: 2.9_2 -> 2.9_3 [pfSense]
<118>	icu: 68.2,1 -> 69.1,1 [pfSense]
<118>	libedit: 3.1.20191231,1 -> 3.1.20210216,1 [pfSense]
<118>	libgcrypt: 1.8.7 -> 1.9.2_1 [pfSense]
<118>	libgpg-error: 1.41 -> 1.42 [pfSense]
<118>	libnghttp2: 1.42.0 -> 1.43.0 [pfSense]
<118>	libuv: 1.40.0 -> 1.41.0 [pfSense]
<118>	libxml2: 2.9.10_2 -> 2.9.10_3 [pfSense]
<118>	mobile-broadband-provider-info: 20190618_1 -> 20201225 [pfSense]
<118>	net-snmp: 5.9_1,1 -> 5.9_3,1 [pfSense]
<118>	nettle: 3.7.2_1 -> 3.7.2_2 [pfSense]
<118>	nginx: 1.18.0_45,2 -> 1.20.0_1,2 [pfSense]
<118>	oniguruma: 6.9.6 -> 6.9.7.1 [pfSense]
<118>	openldap-client: 2.4.57 -> 2.4.58 [pfSense]
<118>	openvpn: 2.5.1 -> 2.5.2 [pfSense]
<118>	pcsc-lite: 1.9.0_1,2 -> 1.9.1,2 [pfSense]
<118>	pfSense: 2.5.1 -> 2.6.0.a.20210511.0100 [pfSense]
<118>	pfSense-base: 2.5.1 -> 2.6.0.a.20210511.0100 [pfSense-core]
<118>	pfSense-default-config: 2.5.1 -> 2.6.0.a.20210511.0100 [pfSense-core]
<118>	php74: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-bcmath: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-bz2: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-ctype: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-curl: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-dom: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-filter: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-ftp: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-gettext: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-intl: 7.4.15 -> 7.4.18_1 [pfSense]
<118>	php74-json: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-ldap: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-mbstring: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-opcache: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-openssl: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-pcntl: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-pdo: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-pdo_sqlite: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-pecl-ssh2: 1.2 -> 1.3.1 [pfSense]
<118>	php74-posix: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-readline: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-session: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-shmop: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-simplexml: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-sockets: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-sqlite3: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-sysvmsg: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-sysvsem: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-sysvshm: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-tokenizer: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-xml: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-xmlreader: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-xmlwriter: 7.4.15 -> 7.4.18 [pfSense]
<118>	php74-zlib: 7.4.15 -> 7.4.18 [pfSense]
<118>	radvd: 2.19 -> 2.19_2 [pfSense]
<118>	readline: 8.0.4 -> 8.1.0 [pfSense]
<118>	smartmontools: 7.2 -> 7.2_1 [pfSense]
<118>	socat: 1.7.3.4_1 -> 1.7.4.1_1 [pfSense]
<118>	sqlite3: 3.34.0,1 -> 3.35.5,1 [pfSense]
<118>	strongswan: 5.9.1 -> 5.9.2_1 [pfSense]
<118>	wpa_supplicant: 2.9_7 -> 2.9_10 [pfSense]
<118>
<118>Installed packages to be REINSTALLED:
<118>	pkg-1.16.3 [pfSense]
<118>
<118>Number of packages to be removed: 3
<118>Number of packages to be installed: 4
<118>Number of packages to be upgraded: 71
<118>Number of packages to be reinstalled: 1
<118>
<118>The process will require 115 MiB more space.
<118>[1/79] Upgrading libxml2 from 2.9.10_2 to 2.9.10_3...
<118>[1/79] Extracting libxml2-2.9.10_3: .......... done
<118>[2/79] Upgrading readline from 8.0.4 to 8.1.0...
<118>[2/79] Extracting readline-8.1.0: .......... done
<118>[3/79] Upgrading php74 from 7.4.15 to 7.4.18...
<118>[3/79] Extracting php74-7.4.18: .......... done
<118>[4/79] Upgrading php74-zlib from 7.4.15 to 7.4.18...
<118>[4/79] Extracting php74-zlib-7.4.18: ....... done
<118>[5/79] Upgrading php74-xml from 7.4.15 to 7.4.18...
<118>[5/79] Extracting php74-xml-7.4.18: ........ done
<118>[6/79] Installing python38-3.8.9...
<118>[6/79] Extracting python38-3.8.9: .......... done
<118>[7/79] Deinstalling unbound-1.13.1...
<118>[7/79] Deleting files for unbound-1.13.1: .......... done
<118>[8/79] Deinstalling py37-setuptools-44.0.0...
<118>[8/79] Deleting files for py37-setuptools-44.0.0: .......... done
<118>[9/79] Upgrading libnghttp2 from 1.42.0 to 1.43.0...
<118>[9/79] Extracting libnghttp2-1.43.0: .......... done
<118>[10/79] Upgrading libgpg-error from 1.41 to 1.42...
<118>[10/79] Extracting libgpg-error-1.42: .......... done
<118>[11/79] Upgrading glib from 2.66.4_1,1 to 2.66.7_1,1...
<118>[11/79] Extracting glib-2.66.7_1,1: .......... done
<118>No schema files found: doing nothing.
<118>[12/79] Upgrading expat from 2.2.10 to 2.3.0...
<118>[12/79] Extracting expat-2.3.0: .......... done
<118>[13/79] Upgrading ca_root_nss from 3.58 to 3.63...
<118>[13/79] Extracting ca_root_nss-3.63: ........ done
<118>[14/79] Upgrading oniguruma from 6.9.6 to 6.9.7.1...
<118>[14/79] Extracting oniguruma-6.9.7.1: .......... done
<118>[15/79] Upgrading libgcrypt from 1.8.7 to 1.9.2_1...
<118>[15/79] Extracting libgcrypt-1.9.2_1: .......... done
<118>[16/79] Upgrading libedit from 3.1.20191231,1 to 3.1.20210216,1...
<118>[16/79] Extracting libedit-3.1.20210216,1: .......... done
<118>[17/79] Upgrading curl from 7.74.0 to 7.76.1...
<118>[17/79] Extracting curl-7.76.1: .......... done
<118>[18/79] Installing unbound112-1.12.0_1...
<118>===> Creating groups.
<118>Using existing group 'unbound'.
<118>===> Creating users
<118>Using existing user 'unbound'.
<118>[18/79] Extracting unbound112-1.12.0_1: .......... done
<118>[19/79] Installing py38-setuptools-44.0.0_1...
<118>[19/79] Extracting py38-setuptools-44.0.0_1: .......... done
<118>[20/79] Deinstalling py37-ply-3.11...
<118>[20/79] Deleting files for py37-ply-3.11: .......... done
<118>[21/79] Upgrading strongswan from 5.9.1 to 5.9.2_1...
<118>[21/79] Extracting strongswan-5.9.2_1: .......... done
<118>[22/79] Upgrading sqlite3 from 3.34.0,1 to 3.35.5,1...
<118>[22/79] Extracting sqlite3-3.35.5,1: .......... done
<118>[23/79] Upgrading php74-tokenizer from 7.4.15 to 7.4.18...
<118>[23/79] Extracting php74-tokenizer-7.4.18: ....... done
<118>[24/79] Upgrading php74-pdo from 7.4.15 to 7.4.18...
<118>[24/79] Extracting php74-pdo-7.4.18: .......... done
<118>[25/79] Upgrading php74-openssl from 7.4.15 to 7.4.18...
<118>[25/79] Extracting php74-openssl-7.4.18: ....... done
<118>[26/79] Upgrading php74-mbstring from 7.4.15 to 7.4.18...
<118>[26/79] Extracting php74-mbstring-7.4.18: .......... done
<118>[27/79] Upgrading php74-dom from 7.4.15 to 7.4.18...
<118>[27/79] Extracting php74-dom-7.4.18: .......... done
<118>[28/79] Upgrading php74-curl from 7.4.15 to 7.4.18...
<118>[28/79] Extracting php74-curl-7.4.18: ....... done
<118>[29/79] Upgrading php74-bcmath from 7.4.15 to 7.4.18...
<118>[29/79] Extracting php74-bcmath-7.4.18: .......... done
<118>[30/79] Upgrading pcsc-lite from 1.9.0_1,2 to 1.9.1,2...
<118>[30/79] Extracting pcsc-lite-1.9.1,2: .......... done
<118>[31/79] Upgrading openldap-client from 2.4.57 to 2.4.58...
<118>[31/79] Extracting openldap-client-2.4.58: .......... done
<118>[32/79] Upgrading nettle from 3.7.2_1 to 3.7.2_2...
<118>[32/79] Extracting nettle-3.7.2_2: .......... done
<118>[33/79] Upgrading net-snmp from 5.9_1,1 to 5.9_3,1...
<118>[33/79] Extracting net-snmp-5.9_3,1: .......... done
<118>[34/79] Upgrading libuv from 1.40.0 to 1.41.0...
<118>[34/79] Extracting libuv-1.41.0: .......... done
<118>[35/79] Upgrading icu from 68.2,1 to 69.1,1...
<118>[35/79] Extracting icu-69.1,1: .......... done
<118>[36/79] Installing py38-ply-3.11...
<118>[36/79] Extracting py38-ply-3.11: .......... done
<118>[37/79] Upgrading wpa_supplicant from 2.9_7 to 2.9_10...
<118>[37/79] Extracting wpa_supplicant-2.9_10: ......... done
<118>[38/79] Upgrading smartmontools from 7.2 to 7.2_1...
<118>[38/79] Extracting smartmontools-7.2_1: .......... done
<118>[39/79] Upgrading radvd from 2.19 to 2.19_2...
<118>[39/79] Extracting radvd-2.19_2: .......... done
<118>[40/79] Upgrading php74-xmlwriter from 7.4.15 to 7.4.18...
<118>[40/79] Extracting php74-xmlwriter-7.4.18: ....... done
<118>[41/79] Upgrading php74-xmlreader from 7.4.15 to 7.4.18...
<118>[41/79] Extracting php74-xmlreader-7.4.18: ....... done
<118>[42/79] Upgrading php74-sysvshm from 7.4.15 to 7.4.18...
<118>[42/79] Extracting php74-sysvshm-7.4.18: ....... done
<118>[43/79] Upgrading php74-sysvsem from 7.4.15 to 7.4.18...
<118>[43/79] Extracting php74-sysvsem-7.4.18: ....... done
<118>[44/79] Upgrading php74-sysvmsg from 7.4.15 to 7.4.18...
<118>[44/79] Extracting php74-sysvmsg-7.4.18: ....... done
<118>[45/79] Upgrading php74-sqlite3 from 7.4.15 to 7.4.18...
<118>[45/79] Extracting php74-sqlite3-7.4.18: ........ done
<118>[46/79] Upgrading php74-sockets from 7.4.15 to 7.4.18...
<118>[46/79] Extracting php74-sockets-7.4.18: .......... done
<118>[47/79] Upgrading php74-simplexml from 7.4.15 to 7.4.18...
<118>[47/79] Extracting php74-simplexml-7.4.18: ......... done
<118>[48/79] Upgrading php74-shmop from 7.4.15 to 7.4.18...
<118>[48/79] Extracting php74-shmop-7.4.18: ....... done
<118>[49/79] Upgrading php74-session from 7.4.15 to 7.4.18...
<118>[49/79] Extracting php74-session-7.4.18: .......... done
<118>[50/79] Upgrading php74-readline from 7.4.15 to 7.4.18...
<118>[50/79] Extracting php74-readline-7.4.18: ........ done
<118>[51/79] Upgrading php74-posix from 7.4.15 to 7.4.18...
<118>[51/79] Extracting php74-posix-7.4.18: ....... done
<118>[52/79] Upgrading php74-pdo_sqlite from 7.4.15 to 7.4.18...
<118>[52/79] Extracting php74-pdo_sqlite-7.4.18: ........ done
<118>[53/79] Upgrading php74-pcntl from 7.4.15 to 7.4.18...
<118>[53/79] Extracting php74-pcntl-7.4.18: ........ done
<118>[54/79] Upgrading php74-opcache from 7.4.15 to 7.4.18...
<118>[54/79] Extracting php74-opcache-7.4.18: .......... done
<118>[55/79] Upgrading php74-ldap from 7.4.15 to 7.4.18...
<118>[55/79] Extracting php74-ldap-7.4.18: ....... done
<118>[56/79] Upgrading php74-json from 7.4.15 to 7.4.18...
<118>[56/79] Extracting php74-json-7.4.18: .......... done
<118>[57/79] Upgrading php74-intl from 7.4.15 to 7.4.18_1...
<118>[57/79] Extracting php74-intl-7.4.18_1: .......... done
<118>[58/79] Upgrading php74-gettext from 7.4.15 to 7.4.18...
<118>[58/79] Extracting php74-gettext-7.4.18: ....... done
<118>[59/79] Upgrading php74-filter from 7.4.15 to 7.4.18...
<118>[59/79] Extracting php74-filter-7.4.18: ........ done
<118>[60/79] Upgrading php74-ctype from 7.4.15 to 7.4.18...
<118>[60/79] Extracting php74-ctype-7.4.18: ....... done
<118>[61/79] Upgrading php74-bz2 from 7.4.15 to 7.4.18...
<118>[61/79] Extracting php74-bz2-7.4.18: ....... done
<118>[62/79] Upgrading openvpn from 2.5.1 to 2.5.2...
<118>[62/79] Extracting openvpn-2.5.2: .......... done
<118>[63/79] Upgrading nginx from 1.18.0_45,2 to 1.20.0_1,2...
<118>===> Creating groups.
<118>Using existing group 'www'.
<118>===> Creating users
<118>Using existing user 'www'.
<118>[63/79] Extracting nginx-1.20.0_1,2: .......... done
<118>[64/79] Upgrading mobile-broadband-provider-info from 20190618_1 to 20201225...
<118>[64/79] Extracting mobile-broadband-provider-info-20201225: ....... done
<118>[65/79] Upgrading hostapd from 2.9_2 to 2.9_3...
<118>[65/79] Extracting hostapd-2.9_3: ....... done
<118>[66/79] Upgrading frr7 from 7.5_1 to 7.5.1_1...
<118>===> Creating groups.
<118>Using existing group 'frr'.
<118>Using existing group 'frrvty'.
<118>===> Creating users
<118>Using existing user 'frr'.
<118>[66/79] Extracting frr7-7.5.1_1: .......... done
<118>[67/79] Upgrading expiretable from 0.6_1 to 0.6_2...
<118>[67/79] Extracting expiretable-0.6_2: ... done
<118>[68/79] Upgrading dnsmasq from 2.84,1 to 2.85,1...
<118>[68/79] Extracting dnsmasq-2.85,1: .......... done
<118>[69/79] Upgrading devcpu-data from 1.37 to 1.38...
<118>[69/79] Extracting devcpu-data-1.38: .......... done
<118>[70/79] Upgrading cpdup from 1.20 to 1.22...
<118>[70/79] Extracting cpdup-1.22: ..... done
<118>[71/79] Upgrading bind-tools from 9.16.12 to 9.16.15...
<118>[71/79] Extracting bind-tools-9.16.15: .......... done
<118>[72/79] Reinstalling pkg-1.16.3...
<118>[72/79] Extracting pkg-1.16.3: .......... done
<118>[73/79] Upgrading socat from 1.7.3.4_1 to 1.7.4.1_1...
<118>[73/79] Extracting socat-1.7.4.1_1: ......... done
<118>[74/79] Upgrading php74-pecl-ssh2 from 1.2 to 1.3.1...
<118>[74/79] Extracting php74-pecl-ssh2-1.3.1: ....... done
<118>[75/79] Upgrading php74-ftp from 7.4.15 to 7.4.18...
<118>[75/79] Extracting php74-ftp-7.4.18: ........ done
<118>[76/79] Upgrading pfSense-default-config from 2.5.1 to 2.6.0.a.20210511.0100...
<118>[76/79] Extracting pfSense-default-config-2.6.0.a.20210511.0100: . done
<118>[77/79] Upgrading pfSense-base from 2.5.1 to 2.6.0.a.20210511.0100...
<118>[77/79] Extracting pfSense-base-2.6.0.a.20210511.0100: .. done
<118>===> Keeping a copy of current version mtree
<118>===> Removing schg flag from base files
<118>===> Extracting new base tarball
<118>===> Removing static obsoleted files
<118>[78/79] Upgrading pfSense from 2.5.1 to 2.6.0.a.20210511.0100...
<118>[78/79] Extracting pfSense-2.6.0.a.20210511.0100: ..... done
<118>[79/79] Upgrading frr7-pythontools from 7.5_1 to 7.5.1_1...
<118>[79/79] Extracting frr7-pythontools-7.5.1_1: .... done
<118>=====
<118>Message from python38-3.8.9:
<118>
<118>--
<118>Note that some standard Python modules are provided as separate ports
<118>as they require additional dependencies. They are available as:
<118>
<118>py38-gdbm       databases/py-gdbm@py38
<118>py38-sqlite3    databases/py-sqlite3@py38
<118>py38-tkinter    x11-toolkits/py-tkinter@py38
<118>You may need to manually remove /usr/local/etc/strongswan.conf if it is no longer needed.
<118>=====
<118>Message from dnsmasq-2.85,1:
<118>
<118>--
<118>To enable dnsmasq, edit /usr/local/etc/dnsmasq.conf and
<118>set dnsmasq_enable="YES" in /etc/rc.conf[.local]
<118>
<118>Further options and actions are documented inside
<118>/usr/local/etc/rc.d/dnsmasq
<118>
<118>SECURITY RECOMMENDATION
<118>~~~~~~~~~~~~~~~~~~~~~~~
<118>It is recommended to enable the wpad-related options
<118>at the end of the configuration file (you may need to
<118>copy them from the example file to yours) to fix
<118>CERT Vulnerability VU#598349.
<118>You may need to manually remove /usr/local/etc/pkg.conf if it is no longer needed.
<118>>>> Setting vital flag on pkg... done.
<118>>>> Setting vital flag on pfSense... done.
<118>>>> Unlocking package pfSense-pkg-Service_Watchdog... done.
<118>>>> Unlocking package pfSense-pkg-System_Patches... done.
<118>>>> Unlocking package pfSense-pkg-acme... done.
<118>>>> Unlocking package pfSense-pkg-frr... done.
<118>External config loader 1.0 is now starting... vtbd0p1 vtbd0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.02-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf8bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...
intsmb0: <Intel PIIX4 SMBUS Interface> irq 9 at device 1.3 on pci0
intsmb0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
<118>done.
<118>Loading configuration......done.
<118>Updating configuration...................done.
<118>Checking config backups consistency...done.
<118>Setting up extended sysctls...done.
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring WAN interface...
<6>vtnet0: link state changed to UP
<118>done.
<118>Configuring LAN interface...
<6>vtnet1: link state changed to UP
<118>done.
<118>Configuring WAN2 interface...
<6>vtnet2: link state changed to UP
<118>done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun1: changing name to 'ovpns1'
<6>tun5: changing name to 'ovpns5'
<6>ovpns1: link state changed to UP
<6>ovpns5: link state changed to UP
<6>tun2: changing name to 'ovpnc2'
<6>ovpnc2: link state changed to UP
<6>tun6: changing name to 'ovpnc6'
<6>ovpnc6: link state changed to UP
<6>tun7: changing name to 'ovpnc7'
<6>pflog0: promiscuous mode enabled
<6>ovpnc7: link state changed to UP
<118>done.
<118>route: route has not been found
<118>route: route has not been found
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Configuring firewall......done.
<118>Configuring l2tp VPN service... done
<118>Configuring IPsec VPN... route: route has not been found
<118>done
<118>Starting SNMP daemon... done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>>>> Removing unnecessary packages... done.
<118>>>> Cleanup pkg cache... done.
<118> Starting package System Patches...done.
<118> Starting package acme...done.
<118> Starting package Service Watchdog...done.
<118> Starting package FRR...done.
<118>pfSense 2.6.0-DEVELOPMENT amd64 Tue May 11 01:04:24 EDT 2021
<118>Bootup complete


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x4b
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff811d1fa0
stack pointer	        = 0x0:0xfffffe0011a75540
frame pointer	        = 0x0:0xfffffe0011a75590
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 9 (dom0)
trap number		= 12
panic: page fault
cpuid = 0
time = 1620743724
KDB: enter: panic
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE devel-12-n226624-e22beee72a6a pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): text 80x25
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.01-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 1073741824 (1024 MB)
avail memory = 971853824 (926 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPCAPIC>
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1100005952 Hz quality 800
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807380e0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80738190, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80738240, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8075fad0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8075fb80, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8075fc30, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff814000c0, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000052 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe1a0-0xe1af at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xe0c0-0xe0df irq 11 at device 1.2 on pci0
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0xe0e0-0xe0ff mem 0xf4000000-0xf7ffffff,0xf8000000-0xfbffffff,0xfc510000-0xfc511fff irq 10 at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci0: <VirtIO PCI Balloon adapter> port 0xe100-0xe11f mem 0xfea00000-0xfea03fff irq 11 at device 3.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci0
virtio_pci1: <VirtIO PCI Console adapter> port 0xe080-0xe0bf mem 0xfc512000-0xfc512fff,0xfea04000-0xfea07fff irq 10 at device 9.0 on pci0
vtcon0: <VirtIO Console Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI Block adapter> port 0xe000-0xe07f mem 0xfc513000-0xfc513fff,0xfea08000-0xfea0bfff irq 10 at device 10.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci2
vtblk0: 32768MB (67108864 512 byte sectors)
virtio_pci3: <VirtIO PCI Network adapter> port 0xe120-0xe13f mem 0xfc514000-0xfc514fff,0xfea0c000-0xfea0ffff irq 10 at device 18.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci3
<6>vtnet0: Ethernet address: 66:6c:d9:bf:99:00
<6>vtnet0: netmap queues/slots: TX 1/256, RX 1/128
000.000766 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci4: <VirtIO PCI Network adapter> port 0xe140-0xe15f mem 0xfc515000-0xfc515fff,0xfea10000-0xfea13fff irq 11 at device 19.0 on pci0
vtnet1: <VirtIO Networking Adapter> on virtio_pci4
<6>vtnet1: Ethernet address: ea:a0:fe:7e:b8:8e
<6>vtnet1: netmap queues/slots: TX 1/256, RX 1/128
000.000767 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci5: <VirtIO PCI Network adapter> port 0xe160-0xe17f mem 0xfc516000-0xfc516fff,0xfea14000-0xfea17fff irq 11 at device 20.0 on pci0
vtnet2: <VirtIO Networking Adapter> on virtio_pci5
<6>vtnet2: Ethernet address: 92:2e:0f:f3:19:48
<6>vtnet2: netmap queues/slots: TX 1/256, RX 1/128
000.000768 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci6: <VirtIO PCI Network adapter> port 0xe180-0xe19f mem 0xfc517000-0xfc517fff,0xfea18000-0xfea1bfff irq 10 at device 21.0 on pci0
vtnet3: <VirtIO Networking Adapter> on virtio_pci6
<6>vtnet3: Ethernet address: 8a:2f:8e:1a:ed:9b
<6>vtnet3: netmap queues/slots: TX 1/256, RX 1/128
000.000769 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib1: <ACPI PCI-PCI bridge> mem 0xfc518000-0xfc5180ff irq 10 at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xfc519000-0xfc5190ff irq 11 at device 31.0 on pci0
pci2: <ACPI PCI bus> on pcib2
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3: <System Container> port 0xae00-0xae13 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xea800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: CAM usbus0
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 617MB (316006 2048 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/vtbd0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>Dismounting ZFS volume zroot/tmp for RAM disk
<118>Dismounting ZFS volume zroot/var for RAM disk
<118>Setting up memory disks... done.
<118>Creating pkg db symlink
<118>Creating pkg cache symlink
<118>Restoring contents of RAM disk store... done.
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-DEVELOPMENT...
<118>
<118>savecore 135 - - reboot after panic: page fault
<118>savecore 135 - - writing core to /var/crash/textdump.tar.0
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... vtbd0p1 vtbd0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.01-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf8bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...
intsmb0: <Intel PIIX4 SMBUS Interface> irq 9 at device 1.3 on pci0
intsmb0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
<118>done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency..................done.
<118>Setting up extended sysctls...done.
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring WAN interface...
<6>vtnet0: link state changed to UP
<118>done.
<118>Configuring LAN interface...
<6>vtnet1: link state changed to UP
<118>done.
<118>Configuring WAN2 interface...
<6>vtnet2: link state changed to UP
<118>done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun1: changing name to 'ovpns1'
<6>tun5: changing name to 'ovpns5'
<6>ovpns1: link state changed to UP
<6>ovpns5: link state changed to UP
<6>tun2: changing name to 'ovpnc2'
<6>ovpnc2: link state changed to UP
<6>tun6: changing name to 'ovpnc6'
<6>ovpnc6: link state changed to UP
<6>tun7: changing name to 'ovpnc7'
<6>pflog0: promiscuous mode enabled
<6>ovpnc7: link state changed to UP
<118>done.
<118>route: route has not been found
<118>route: route has not been found
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Configuring firewall......done.
<118>Configuring l2tp VPN service... done
<118>Configuring IPsec VPN... route: route has not been found
<118>done
<118>Starting SNMP daemon... done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package System Patches...done.
<118> Starting package acme...done.
<118> Starting package Service Watchdog...done.
<118> Starting package FRR...done.
<118>pfSense 2.6.0-DEVELOPMENT amd64 Tue May 11 01:04:24 EDT 2021
<118>Bootup complete
<6>pflog0: promiscuous mode disabled
<6>ovpnc7: link state changed to DOWN
<6>ovpnc6: link state changed to DOWN
<6>ovpns1: link state changed to DOWN
<6>ovpns5: link state changed to DOWN
<6>ovpnc2: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 1 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
All buffers synced.
Uptime: 6d4h55m11s
Rebooting...
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE devel-12-n226624-e22beee72a6a pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): text 80x25
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.02-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 1073741824 (1024 MB)
avail memory = 971853824 (926 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPCAPIC>
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1100008876 Hz quality 800
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807380e0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80738190, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80738240, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8075fad0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8075fb80, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8075fc30, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff814000c0, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000052 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe1a0-0xe1af at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xe0c0-0xe0df irq 11 at device 1.2 on pci0
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0xe0e0-0xe0ff mem 0xf4000000-0xf7ffffff,0xf8000000-0xfbffffff,0xfc510000-0xfc511fff irq 10 at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci0: <VirtIO PCI Balloon adapter> port 0xe100-0xe11f mem 0xfea00000-0xfea03fff irq 11 at device 3.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci0
virtio_pci1: <VirtIO PCI Console adapter> port 0xe080-0xe0bf mem 0xfc512000-0xfc512fff,0xfea04000-0xfea07fff irq 10 at device 9.0 on pci0
vtcon0: <VirtIO Console Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI Block adapter> port 0xe000-0xe07f mem 0xfc513000-0xfc513fff,0xfea08000-0xfea0bfff irq 10 at device 10.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci2
vtblk0: 32768MB (67108864 512 byte sectors)
virtio_pci3: <VirtIO PCI Network adapter> port 0xe120-0xe13f mem 0xfc514000-0xfc514fff,0xfea0c000-0xfea0ffff irq 10 at device 18.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci3
<6>vtnet0: Ethernet address: 66:6c:d9:bf:99:00
<6>vtnet0: netmap queues/slots: TX 1/256, RX 1/128
000.000766 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci4: <VirtIO PCI Network adapter> port 0xe140-0xe15f mem 0xfc515000-0xfc515fff,0xfea10000-0xfea13fff irq 11 at device 19.0 on pci0
vtnet1: <VirtIO Networking Adapter> on virtio_pci4
<6>vtnet1: Ethernet address: ea:a0:fe:7e:b8:8e
<6>vtnet1: netmap queues/slots: TX 1/256, RX 1/128
000.000767 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci5: <VirtIO PCI Network adapter> port 0xe160-0xe17f mem 0xfc516000-0xfc516fff,0xfea14000-0xfea17fff irq 11 at device 20.0 on pci0
vtnet2: <VirtIO Networking Adapter> on virtio_pci5
<6>vtnet2: Ethernet address: 92:2e:0f:f3:19:48
<6>vtnet2: netmap queues/slots: TX 1/256, RX 1/128
000.000768 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci6: <VirtIO PCI Network adapter> port 0xe180-0xe19f mem 0xfc517000-0xfc517fff,0xfea18000-0xfea1bfff irq 10 at device 21.0 on pci0
vtnet3: <VirtIO Networking Adapter> on virtio_pci6
<6>vtnet3: Ethernet address: 8a:2f:8e:1a:ed:9b
<6>vtnet3: netmap queues/slots: TX 1/256, RX 1/128
000.000769 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib1: <ACPI PCI-PCI bridge> mem 0xfc518000-0xfc5180ff irq 10 at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xfc519000-0xfc5190ff irq 11 at device 31.0 on pci0
pci2: <ACPI PCI bus> on pcib2
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3: <System Container> port 0xae00-0xae13 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xea800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: CAM usbus0
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 617MB (316006 2048 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/vtbd0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>Dismounting ZFS volume zroot/tmp for RAM disk
<118>Dismounting ZFS volume zroot/var for RAM disk
<118>Setting up memory disks... done.
<118>Creating pkg db symlink
<118>Creating pkg cache symlink
<118>Restoring contents of RAM disk store... done.
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-DEVELOPMENT...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>>>> Locking package pfSense-pkg-Service_Watchdog... done.
<118>>>> Locking package pfSense-pkg-System_Patches... done.
<118>>>> Locking package pfSense-pkg-acme... done.
<118>>>> Locking package pfSense-pkg-frr... done.
<118>>>> Upgrading necessary packages... 
<118>Checking for upgrades (3 candidates): ... done
<118>Processing candidates (3 candidates): ... done
<118>Checking integrity... done (0 conflicting)
<118>The following 3 package(s) will be affected (of 0 checked):
<118>
<118>Installed packages to be UPGRADED:
<118>	pfSense: 2.6.0.a.20210511.0100 -> 2.6.0.a.20210517.0100 [pfSense]
<118>	pfSense-base: 2.6.0.a.20210511.0100 -> 2.6.0.a.20210517.0100 [pfSense-core]
<118>	pfSense-default-config: 2.6.0.a.20210511.0100 -> 2.6.0.a.20210517.0100 [pfSense-core]
<118>
<118>Number of packages to be upgraded: 3
<118>
<118>The operation will free 1 MiB.
<118>[1/3] Upgrading pfSense-default-config from 2.6.0.a.20210511.0100 to 2.6.0.a.20210517.0100...
<118>[1/3] Extracting pfSense-default-config-2.6.0.a.20210517.0100: . done
<118>[2/3] Upgrading pfSense-base from 2.6.0.a.20210511.0100 to 2.6.0.a.20210517.0100...
<118>[2/3] Extracting pfSense-base-2.6.0.a.20210517.0100: .. done
<118>===> Keeping a copy of current version mtree
<118>===> Removing schg flag from base files
<118>===> Extracting new base tarball
<118>===> Removing static obsoleted files
<118>[3/3] Upgrading pfSense from 2.6.0.a.20210511.0100 to 2.6.0.a.20210517.0100...
<118>[3/3] Extracting pfSense-2.6.0.a.20210517.0100: ..... done
<118>>>> Setting vital flag on pfSense... done.
<118>>>> Unlocking package pfSense-pkg-Service_Watchdog... done.
<118>>>> Unlocking package pfSense-pkg-System_Patches... done.
<118>>>> Unlocking package pfSense-pkg-acme... done.
<118>>>> Unlocking package pfSense-pkg-frr... done.
<118>External config loader 1.0 is now starting... vtbd0p1 vtbd0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.02-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506f1  Family=0x6  Model=0x5f  Stepping=1
  Features=0xf8bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xcff82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x20944283<FSGSBASE,TSCADJ,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,SHA>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x9000
Hypervisor: Origin = "KVMKVMKVM"
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...
intsmb0: <Intel PIIX4 SMBUS Interface> irq 9 at device 1.3 on pci0
intsmb0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
<118>done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency....................done.
<118>Setting up extended sysctls...done.
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring WAN interface...
<6>vtnet0: link state changed to UP
<118>done.
<118>Configuring LAN interface...
<6>vtnet1: link state changed to UP
<118>done.
<118>Configuring WAN2 interface...
<6>vtnet2: link state changed to UP
<118>done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun1: changing name to 'ovpns1'
<6>tun5: changing name to 'ovpns5'
<6>ovpns1: link state changed to UP
<6>ovpns5: link state changed to UP
<6>tun2: changing name to 'ovpnc2'
<6>ovpnc2: link state changed to UP
<6>tun6: changing name to 'ovpnc6'
<6>ovpnc6: link state changed to UP
<6>tun7: changing name to 'ovpnc7'
<6>pflog0: promiscuous mode enabled
<6>ovpnc7: link state changed to UP
<118>done.
<118>route: route has not been found
<118>route: route has not been found
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Configuring firewall......done.
<118>Configuring l2tp VPN service... done
<118>Configuring IPsec VPN... route: route has not been found
<118>done
<118>Starting SNMP daemon... done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>>>> Removing unnecessary packages... done.
<118>>>> Cleanup pkg cache... done.
<118> Starting package System Patches...done.
<118> Starting package acme...done.
<118> Starting package Service Watchdog...done.
<118> Starting package FRR...done.
<118>pfSense 2.6.0-DEVELOPMENT amd64 Mon May 17 01:03:59 EDT 2021
<118>Bootup complete
panic: bad pte va 80067f000 pte 0
cpuid = 0
time = 1621280829
KDB: enter: panic
