---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE devel-12-n226623-ba553ae641b5 pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 2115428352 (2017 MB)
avail memory = 1988055040 (1895 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1000019554 Hz quality 800
wlan: mac acl policy registered
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807380e0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80738190, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80738240, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8075fad0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8075fb80, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8075fc30, 0) error 1
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
000.000018 [4344] netmap_init               netmap: loaded module
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff814000c0, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
[ath_hal] loaded
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
apei0: <ACPI Platform Error Interface> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xfe500000-0xfe500fff,0xfe400000-0xfe403fff at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
<6>re0: Using defaults for TSO: 65518/35/2048
<6>re0: Ethernet address: 00:0d:b9:33:0f:70
<6>re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xfe700000-0xfe700fff,0xfe600000-0xfe603fff at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
<6>re1: Using defaults for TSO: 65518/35/2048
<6>re1: Ethernet address: 00:0d:b9:33:0f:71
<6>re1: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xfe900000-0xfe900fff,0xfe800000-0xfe803fff at device 0.0 on pci3
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
rgephy2:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
<6>re2: Using defaults for TSO: 65518/35/2048
<6>re2: Ethernet address: 00:0d:b9:33:0f:72
<6>re2: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ath0: <Atheros 5424/2424> mem 0xfea00000-0xfea0ffff at device 0.0 on pci4
ath0: AR2425 mac 14.2 RF5424 phy 7.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4020-0x4027,0x4040-0x4043,0x4028-0x402f,0x4044-0x4047,0x4000-0x400f mem 0xfeb04000-0xfeb043ff at device 17.0 on pci0
ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb00000-0xfeb00fff at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04400-0xfeb044ff at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb01000-0xfeb01fff at device 19.0 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04500-0xfeb045ff at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4010-0x401f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib5: failed to allocate initial memory window: 0-0xfffff
pcib5: failed to allocate initial prefetch window: 0-0xfffff
pci5: <ACPI PCI bus> on pcib5
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb02000-0xfeb02fff at device 20.5 on pci0
usbus4 on ohci2
usbus4: 12Mbps Full Speed USB v1.0
pcib6: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci6: <ACPI PCI bus> on pcib6
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb03000-0xfeb03fff at device 22.0 on pci0
usbus5 on ohci3
usbus5: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04600-0xfeb046ff at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
usbus6: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xee000-0xeffff pnpid ORM0000 on isa0
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
Timecounters tick every 1.000 msec
ugen3.1: <ATI EHCI root HUB> at usbus3
ugen5.1: <ATI OHCI root HUB> at usbus5
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen1.1: <ATI EHCI root HUB> at usbus1
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen6.1: <ATI EHCI root HUB> at usbus6
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen2.1: <ATI OHCI root HUB> at usbus2
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Trying to mount root from ufs:/dev/gptid/c9061a90-d14d-11e8-a0fa-000db9330f70 [rw]...
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6
uhub1: 4 ports with 4 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub6: 5 ports with 5 removable, self powered
Root mount waiting for: CAM usbus1 usbus3 usbus6
uhub4: 4 ports with 4 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ugen6.2: <Generic Flash Card Reader/Writer> at usbus6
umass0 on uhub4
umass0: <Generic Flash Card Reader/Writer, class 0/0, rev 2.01/1.00, addr 2> on usbus6
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <INTEL SSDMCEAC030B3 LLLi> ACS-2 ATA SATA 3.x device
ada0: Serial Number CVLI44460077030H
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 28626MB (58626288 512 byte sectors)
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Multiple Card  Reader 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
mountroot: waiting for device /dev/gptid/c9061a90-d14d-11e8-a0fa-000db9330f70...
Dual Console: Serial Primary, Video Secondary
<118>Configuring crash dumps...
<118>Using /dev/gptid/c908eedc-d14d-11e8-a0fa-000db9330f70 for dump device.
<118>/dev/gptid/c9061a90-d14d-11e8-a0fa-000db9330f70: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/gptid/c9061a90-d14d-11e8-a0fa-000db9330f70: clean, 6303217 free (7809 frags, 786926 blocks, 0.1% fragmentation)
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-DEVELOPMENT...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>>>> Locking package pfSense-pkg-Service_Watchdog... done.
<118>>>> Locking package pfSense-pkg-System_Patches... done.
<118>>>> Locking package pfSense-pkg-acme... done.
<118>>>> Locking package pfSense-pkg-apcupsd... done.
<118>>>> Locking package pfSense-pkg-frr... done.
<118>>>> Locking package pfSense-pkg-nmap... done.
<118>>>> Locking package pfSense-pkg-openvpn-client-export... done.
<118>>>> Locking package pfSense-pkg-sudo... done.
<118>>>> Locking package pfSense-pkg-syslog-ng... done.
<118>>>> Upgrading necessary packages... 
<118>Checking for upgrades (38 candidates): .......... done
<118>Processing candidates (38 candidates): .......... done
<118>Checking integrity... done (0 conflicting)
<118>The following 38 package(s) will be affected (of 0 checked):
<118>
<118>Installed packages to be UPGRADED:
<118>	expiretable: 0.6_1 -> 0.6_2 [pfSense]
<118>	pcsc-lite: 1.9.0_1,2 -> 1.9.1,2 [pfSense]
<118>	pfSense: 2.6.0.a.20210504.0100 -> 2.6.0.a.20210507.0100 [pfSense]
<118>	pfSense-base: 2.6.0.a.20210504.0100 -> 2.6.0.a.20210507.0100 [pfSense-core]
<118>	pfSense-default-config-serial: 2.6.0.a.20210504.0100 -> 2.6.0.a.20210507.0100 [pfSense-core]
<118>	php74: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-bcmath: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-bz2: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-ctype: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-curl: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-dom: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-filter: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-ftp: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-gettext: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-intl: 7.4.16_1 -> 7.4.18_1 [pfSense]
<118>	php74-json: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-ldap: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-mbstring: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-opcache: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-openssl: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-pcntl: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-pdo: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-pdo_sqlite: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-posix: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-readline: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-session: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-shmop: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-simplexml: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-sockets: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-sqlite3: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-sysvmsg: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-sysvsem: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-sysvshm: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-tokenizer: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-xml: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-xmlreader: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-xmlwriter: 7.4.16 -> 7.4.18 [pfSense]
<118>	php74-zlib: 7.4.16 -> 7.4.18 [pfSense]
<118>
<118>Number of packages to be upgraded: 38
<118>[1/38] Upgrading php74 from 7.4.16 to 7.4.18...
<118>[1/38] Extracting php74-7.4.18: .......... done
<118>[2/38] Upgrading php74-zlib from 7.4.16 to 7.4.18...
<118>[2/38] Extracting php74-zlib-7.4.18: ....... done
<118>[3/38] Upgrading php74-xml from 7.4.16 to 7.4.18...
<118>[3/38] Extracting php74-xml-7.4.18: ........ done
<118>[4/38] Upgrading php74-tokenizer from 7.4.16 to 7.4.18...
<118>[4/38] Extracting php74-tokenizer-7.4.18: ....... done
<118>[5/38] Upgrading php74-pdo from 7.4.16 to 7.4.18...
<118>[5/38] Extracting php74-pdo-7.4.18: .......... done
<118>[6/38] Upgrading php74-openssl from 7.4.16 to 7.4.18...
<118>[6/38] Extracting php74-openssl-7.4.18: ....... done
<118>[7/38] Upgrading php74-mbstring from 7.4.16 to 7.4.18...
<118>[7/38] Extracting php74-mbstring-7.4.18: .......... done
<118>[8/38] Upgrading php74-dom from 7.4.16 to 7.4.18...
<118>[8/38] Extracting php74-dom-7.4.18: .......... done
<118>[9/38] Upgrading php74-curl from 7.4.16 to 7.4.18...
<118>[9/38] Extracting php74-curl-7.4.18: ....... done
<118>[10/38] Upgrading php74-bcmath from 7.4.16 to 7.4.18...
<118>[10/38] Extracting php74-bcmath-7.4.18: .......... done
<118>[11/38] Upgrading pcsc-lite from 1.9.0_1,2 to 1.9.1,2...
<118>[11/38] Extracting pcsc-lite-1.9.1,2: .......... done
<118>[12/38] Upgrading php74-xmlwriter from 7.4.16 to 7.4.18...
<118>[12/38] Extracting php74-xmlwriter-7.4.18: ....... done
<118>[13/38] Upgrading php74-xmlreader from 7.4.16 to 7.4.18...
<118>[13/38] Extracting php74-xmlreader-7.4.18: ....... done
<118>[14/38] Upgrading php74-sysvshm from 7.4.16 to 7.4.18...
<118>[14/38] Extracting php74-sysvshm-7.4.18: ....... done
<118>[15/38] Upgrading php74-sysvsem from 7.4.16 to 7.4.18...
<118>[15/38] Extracting php74-sysvsem-7.4.18: ....... done
<118>[16/38] Upgrading php74-sysvmsg from 7.4.16 to 7.4.18...
<118>[16/38] Extracting php74-sysvmsg-7.4.18: ....... done
<118>[17/38] Upgrading php74-sqlite3 from 7.4.16 to 7.4.18...
<118>[17/38] Extracting php74-sqlite3-7.4.18: ........ done
<118>[18/38] Upgrading php74-sockets from 7.4.16 to 7.4.18...
<118>[18/38] Extracting php74-sockets-7.4.18: .......... done
<118>[19/38] Upgrading php74-simplexml from 7.4.16 to 7.4.18...
<118>[19/38] Extracting php74-simplexml-7.4.18: ......... done
<118>[20/38] Upgrading php74-shmop from 7.4.16 to 7.4.18...
<118>[20/38] Extracting php74-shmop-7.4.18: ....... done
<118>[21/38] Upgrading php74-session from 7.4.16 to 7.4.18...
<118>[21/38] Extracting php74-session-7.4.18: .......... done
<118>[22/38] Upgrading php74-readline from 7.4.16 to 7.4.18...
<118>[22/38] Extracting php74-readline-7.4.18: ........ done
<118>[23/38] Upgrading php74-posix from 7.4.16 to 7.4.18...
<118>[23/38] Extracting php74-posix-7.4.18: ....... done
<118>[24/38] Upgrading php74-pdo_sqlite from 7.4.16 to 7.4.18...
<118>[24/38] Extracting php74-pdo_sqlite-7.4.18: ........ done
<118>[25/38] Upgrading php74-pcntl from 7.4.16 to 7.4.18...
<118>[25/38] Extracting php74-pcntl-7.4.18: ........ done
<118>[26/38] Upgrading php74-opcache from 7.4.16 to 7.4.18...
<118>[26/38] Extracting php74-opcache-7.4.18: .......... done
<118>[27/38] Upgrading php74-ldap from 7.4.16 to 7.4.18...
<118>[27/38] Extracting php74-ldap-7.4.18: ....... done
<118>[28/38] Upgrading php74-json from 7.4.16 to 7.4.18...
<118>[28/38] Extracting php74-json-7.4.18: .......... done
<118>[29/38] Upgrading php74-intl from 7.4.16_1 to 7.4.18_1...
<118>[29/38] Extracting php74-intl-7.4.18_1: .......... done
<118>[30/38] Upgrading php74-gettext from 7.4.16 to 7.4.18...
<118>[30/38] Extracting php74-gettext-7.4.18: ....... done
<118>[31/38] Upgrading php74-filter from 7.4.16 to 7.4.18...
<118>[31/38] Extracting php74-filter-7.4.18: ........ done
<118>[32/38] Upgrading php74-ctype from 7.4.16 to 7.4.18...
<118>[32/38] Extracting php74-ctype-7.4.18: ....... done
<118>[33/38] Upgrading php74-bz2 from 7.4.16 to 7.4.18...
<118>[33/38] Extracting php74-bz2-7.4.18: ....... done
<118>[34/38] Upgrading expiretable from 0.6_1 to 0.6_2...
<118>[34/38] Extracting expiretable-0.6_2: ... done
<118>[35/38] Upgrading php74-ftp from 7.4.16 to 7.4.18...
<118>[35/38] Extracting php74-ftp-7.4.18: ........ done
<118>[36/38] Upgrading pfSense-default-config-serial from 2.6.0.a.20210504.0100 to 2.6.0.a.20210507.0100...
<118>[36/38] Extracting pfSense-default-config-serial-2.6.0.a.20210507.0100: .. done
<118>[37/38] Upgrading pfSense-base from 2.6.0.a.20210504.0100 to 2.6.0.a.20210507.0100...
<118>[37/38] Extracting pfSense-base-2.6.0.a.20210507.0100: .. done
<118>===> Keeping a copy of current version mtree
<118>===> Removing schg flag from base files
<118>===> Extracting new base tarball
<118>===> Removing static obsoleted files
<118>[38/38] Upgrading pfSense from 2.6.0.a.20210504.0100 to 2.6.0.a.20210507.0100...
<118>[38/38] Extracting pfSense-2.6.0.a.20210507.0100: ..... done
<118>>>> Setting vital flag on pfSense... done.
<118>>>> Unlocking package pfSense-pkg-Service_Watchdog... done.
<118>>>> Unlocking package pfSense-pkg-System_Patches... done.
<118>>>> Unlocking package pfSense-pkg-acme... done.
<118>>>> Unlocking package pfSense-pkg-apcupsd... done.
<118>>>> Unlocking package pfSense-pkg-frr... done.
<118>>>> Unlocking package pfSense-pkg-nmap... done.
<118>>>> Unlocking package pfSense-pkg-openvpn-client-export... done.
<118>>>> Unlocking package pfSense-pkg-sudo... done.
<118>>>> Unlocking package pfSense-pkg-syslog-ng... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p2 ada0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=8
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
<118>done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...
<6>wlan0: Ethernet address: 00:24:2b:52:79:9e
<6>wlan0: changing name to 'ath0_wlan0'
<118>done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...
<6>re1: link state changed to DOWN
<6>vlan0: changing name to 're1.50'
<6>vlan1: changing name to 're1.30'
<6>vlan2: changing name to 're1.60'
<6>vlan3: changing name to 're1.70'
<6>re1: link state changed to UP
<6>re1.50: link state changed to UP
<6>re1.70: link state changed to UP
<6>re1.60: link state changed to UP
<6>re1.30: link state changed to UP
<118>done.
<118>Configuring QinQ interfaces...done.
<118>Configuring WAN interface...done.
<118>Configuring LAN interface...
<6>re2: link state changed to DOWN
<118>done.
<118>Configuring EXTERNALAP interface...
<6>re0: link state changed to DOWN
<118>done.
<118>Configuring WAN2 interface...done.
<118>Configuring PWAN interface...
<6>ng0: changing name to 'pppoe0'
<6>re2: link state changed to UP
<118>done.
<118>Configuring OPT6 interface...
<6>re0: link state changed to UP
<118>done.
<118>Configuring IPsec VTI interfaces...
<6>pflog0: promiscuous mode enabled
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun1: changing name to 'ovpns1'
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
<6>ovpns1: link state changed to UP
<6>tun2: changing name to 'ovpns2'
<6>ovpns2: link state changed to UP
<6>tun3: changing name to 'ovpns3'
<6>ovpns3: link state changed to UP
<6>tun4: changing name to 'ovpns4'
<6>ovpns4: link state changed to UP
<6>tun5: changing name to 'ovpns5'
<6>ovpns5: link state changed to UP
<6>tun6: changing name to 'ovpns6'
<6>ovpns6: link state changed to UP
<6>tun12: changing name to 'ovpns12'
<6>ovpns12: link state changed to UP
<6>tun7: changing name to 'ovpnc7'
<6>ovpnc7: link state changed to UP
<6>tun8: changing name to 'ovpnc8'
<6>tun9: changing name to 'ovpnc9'
<6>tun10: changing name to 'ovpnc10'
<6>tun11: changing name to 'ovpnc11'
<6>ovpnc11: link state changed to UP
<118>done.
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall......done.
<118>Configuring IPsec VPN... done
<118>Starting SNMP daemon... done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>>>> Removing unnecessary packages... done.
<118>>>> Cleanup pkg cache... done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package Service Watchdog...done.
<118> Starting package System Patches...done.
<118> Starting package acme...done.
<118> Starting package nmap...done.
<118> Starting package FRR...done.
<118> Starting package apcupsd...done.
<118> Starting package syslog-ng...done.
<118> Starting package sudo...done.
<118>pfSense 2.6.0-DEVELOPMENT amd64 Fri May 07 01:03:54 EDT 2021
<118>Bootup complete
<6>re0: link state changed to DOWN
<6>re0: link state changed to UP
<6>re0: link state changed to DOWN
<6>re0: link state changed to UP
panic: vm_fault: fault on nofault entry, addr: 0xfffffe001e02d000
cpuid = 0
time = 1621261619
KDB: enter: panic
