Dell MoBo

********************************* IFCONFIG *********************************

dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80008<VLAN_MTU,LINKSTATE>
	ether 00:30:6e:2d:7f:44
	inet6 fe80::1:1%dc0 prefixlen 64 scopeid 0x5 
	nd6 options=1<PERFORMNUD>
	media: Ethernet autoselect (none)
	status: no carrier
dc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80008<VLAN_MTU,LINKSTATE>
	ether 00:30:6e:2d:7f:45
	inet6 fe80::230:6eff:fe2d:7f45%dc1 prefixlen 64 scopeid 0x6 
	inet 192.168.0.186 netmask 0xffffff00 broadcast 192.168.0.255
	nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
dc2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80008<VLAN_MTU,LINKSTATE>
	ether 00:30:6e:2d:7f:46
	inet6 fe80::1:1%dc2 prefixlen 64 scopeid 0x7 
	nd6 options=1<PERFORMNUD>
	media: Ethernet autoselect (none)
	status: no carrier
dc3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80008<VLAN_MTU,LINKSTATE>
	ether 00:30:6e:2d:7f:47
	inet6 fe80::230:6eff:fe2d:7f47%dc3 prefixlen 64 scopeid 0x8 
	nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
	media: Ethernet autoselect (none)
	status: no carrier
bfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80008<VLAN_MTU,LINKSTATE>
	ether 00:0b:db:2a:80:81
	inet6 fe80::20b:dbff:fe2a:8081%bfe0 prefixlen 64 scopeid 0x9 
	nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
	media: Ethernet autoselect (none)
	status: no carrier
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
enc0: flags=0<> metric 0 mtu 1536
pflog0: flags=100<PROMISC> metric 0 mtu 33192
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0xd 
	nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
pfsync0: flags=0<> metric 0 mtu 1460
	syncpeer: 224.0.0.240 maxupd: 128 syncok: 1

********************************* DMESG *********************************

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p8 #0: Sat May 25 08:07:24 EDT 2013
    root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.20GHz (2192.90-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Family = f  Model = 2  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x400<CNXT-ID>
real memory  = 268435456 (256 MB)
avail memory = 238157824 (227 MB)
ACPI APIC Table: <IntelR AWRDACPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07baca0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07bad40, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07bade0, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, fdf0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xd0000000-0xd7ffffff,0xe0000000-0xe007ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82845M (845M GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 892k stolen memory
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0080000-0xe00803ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 4.0 on pci1
pci2: <PCI bus> on pcib2
dc0: <Intel 21143 10/100BaseTX> port 0xc000-0xc07f mem 0xdd000000-0xdd0003ff irq 16 at device 4.0 on pci2
miibus0: <MII bus> on dc0
lxtphy0: <LXT970 10/100 media interface> PHY 0 on miibus0
lxtphy0:  100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: [ITHREAD]
dc1: <Intel 21143 10/100BaseTX> port 0xc400-0xc47f mem 0xdd001000-0xdd0013ff irq 17 at device 5.0 on pci2
miibus1: <MII bus> on dc1
lxtphy1: <LXT970 10/100 media interface> PHY 0 on miibus1
lxtphy1:  100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: [ITHREAD]
dc2: <Intel 21143 10/100BaseTX> port 0xc800-0xc87f mem 0xdd002000-0xdd0023ff irq 18 at device 6.0 on pci2
miibus2: <MII bus> on dc2
lxtphy2: <LXT970 10/100 media interface> PHY 0 on miibus2
lxtphy2:  100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: [ITHREAD]
dc3: <Intel 21143 10/100BaseTX> port 0xcc00-0xcc7f mem 0xdd003000-0xdd0033ff irq 19 at device 7.0 on pci2
miibus3: <MII bus> on dc3
lxtphy3: <LXT970 10/100 media interface> PHY 0 on miibus3
lxtphy3:  100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: [ITHREAD]
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xdf000000-0xdf001fff irq 17 at device 9.0 on pci1
miibus4: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus4
bmtphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata0: [ITHREAD]
ata1: <ATA channel> at channel 1 on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1200-KB 5.25" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd4000-0xd57ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 2192898564 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
acd0: CDRW <NEC CD-RW NR-9300A/105B> at ata1-master UDMA33 
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen3.2: <Sony> at usbus3
umass0: <Bulk-In, Bulk-Out, Interface> on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Sony Card_R/W  -CF 2.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da1 at umass-sim0 bus 0 scbus0 target 0 lun 1
da1: <Sony Card_R/W  -SM/xD 2.00> Removable Direct Access SCSI-0 device 
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0 
(probe0:umass-sim0:0:0:2): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI status: Check Condition
(probe0:umass-sim0:0:0:2): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da2 at umass-sim0 bus 0 scbus0 target 0 lun 2
da2: <Sony Card_R/W  -SD 2.00> Removable Direct Access SCSI-0 device 
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0 
(probe0:umass-sim0:0:0:3): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI status: Check Condition
(probe0:umass-sim0:0:0:3): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da3 at umass-sim0 bus 0 scbus0 target 0 lun 3
da3: <Sony Card_R/W  -MS 2.00> Removable Direct Access SCSI-0 device 
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
Trying to mount root from cd9660:/dev/iso9660/pfSense
md0.uzip: 2578 x 65536 blocks
pflog0: promiscuous mode enabled
dc2: link state changed to DOWN
dc0: link state changed to UP
dc3: link state changed to DOWN
dc1: link state changed to UP
dc0: link state changed to DOWN
dc0: link state changed to UP
dc0: link state changed to DOWN

********************************* DEVINFO *********************************

nexus0
  cryptosoft0
  apic0
  npx0
  ram0
      I/O memory addresses:
          0x0-0x9fbff
          0x100000-0xfeeffff
  acpi0
      Interrupt request lines:
          9
      I/O ports:
          0x10-0x1f
          0x22-0x3f
          0x44-0x5f
          0x62-0x63
          0x65-0x6f
          0x74-0x7f
          0x91-0x93
          0xa2-0xbf
          0xe0-0xef
          0x400-0x4bf
          0x4d0-0x4d1
          0x800-0x87f
      I/O memory addresses:
          0xcc000-0xcffff
          0xd5800-0xd7fff
          0xe0000-0xeffff
          0xf0000-0xfbfff
          0xfc000-0xfffff
          0xfef0000-0xfefffff
          0xfec00000-0xfec00fff
          0xfee00000-0xfee00fff
          0xffb00000-0xffbfffff
          0xfff00000-0xffffffff
    cpu0
      p4tcc0
      cpufreq0
    acpi_button0
    acpi_sysresource0
    pcib0
      pci0
          I/O ports:
              0x500-0x51f
              0xe000-0xe0ff
              0xe400-0xe43f
          I/O memory addresses:
              0xd8000000-0xdbffffff
              0xe0081000-0xe00811ff
              0xe0082000-0xe00820ff
        hostb0
        vgapci0
            I/O memory addresses:
                0xd0000000-0xd7ffffff
                0xe0000000-0xe007ffff
          agp0
        uhci0
            Interrupt request lines:
                16
            I/O ports:
                0xd800-0xd81f
          usbus0
            uhub0
        uhci1
            Interrupt request lines:
                19
            I/O ports:
                0xd000-0xd01f
          usbus1
            uhub1
        uhci2
            Interrupt request lines:
                18
            I/O ports:
                0xd400-0xd41f
          usbus2
            uhub2
        ehci0
            Interrupt request lines:
                23
            I/O memory addresses:
                0xe0080000-0xe00803ff
          usbus3
            uhub3
              umass0
        pcib1
          pci1
            pcib2
              pci2
                  I/O memory addresses:
                      0xdd000000-0xdd0003ff
                      0xdd001000-0xdd0013ff
                      0xdd002000-0xdd0023ff
                      0xdd003000-0xdd0033ff
                dc0
                    Interrupt request lines:
                        16
                    I/O ports:
                        0xc000-0xc07f
                  miibus0
                    lxtphy0
                dc1
                    Interrupt request lines:
                        17
                    I/O ports:
                        0xc400-0xc47f
                  miibus1
                    lxtphy1
                dc2
                    Interrupt request lines:
                        18
                    I/O ports:
                        0xc800-0xc87f
                  miibus2
                    lxtphy2
                dc3
                    Interrupt request lines:
                        19
                    I/O ports:
                        0xcc00-0xcc7f
                  miibus3
                    lxtphy3
            bfe0
                Interrupt request lines:
                    17
                I/O memory addresses:
                    0xdf000000-0xdf001fff
              miibus4
                bmtphy0
        isab0
          isa0
            orm0
                I/O memory addresses:
                    0xd4000-0xd57ff
            pmtimer0
            sc0
            vga0
                I/O ports:
                    0x3c0-0x3df
                I/O memory addresses:
                    0xa0000-0xbffff
        atapci0
            I/O ports:
                0x170-0x177
                0x1f0-0x1f7
                0x376
                0x3f6
                0xf000-0xf00f
          ata0
              Interrupt request lines:
                  14
          ata1
              Interrupt request lines:
                  15
            acd0
    acpi_sysresource1
    pci_link0
    pci_link1
    pci_link2
    pci_link3
    pci_link4
    pci_link5
    pci_link6
    pci_link7
    acpi_sysresource2
    atpic0
    atdma0
    attimer0
    atrtc0
        Interrupt request lines:
            8
        I/O ports:
            0x70-0x71
    npxisa0
    fdc0
        Interrupt request lines:
            6
        DMA request lines:
            2
        I/O ports:
            0x3f0-0x3f5
            0x3f7
      fd0
    uart0
        Interrupt request lines:
            4
        I/O ports:
            0x3f8-0x3ff
    ppc0
        Interrupt request lines:
            7
        I/O ports:
            0x378-0x37f
      ppbus0
        plip0
        lpt0
        ppi0
    psmcpnp0
        Interrupt request lines:
            12
    atkbdc0
        I/O ports:
            0x60
            0x64
      atkbd0
          Interrupt request lines:
              1
      psm0
          Interrupt request lines:
              12
    acpi_timer0
        ACPI I/O ports:
            0x408-0x40b

********************************* VMSTAT *********************************

interrupt                          total       rate
irq1: atkbd0                          71          0
irq6: fdc0                             3          0
irq15: ata1                         4233          3
irq16: dc0 uhci0                 1049652        908
irq17: dc1 bfe0                   903612        782
irq18: dc2 uhci2                  783808        678
irq19: dc3 uhci1                  655955        567
irq23: ehci0                         318          0
cpu0: timer                      2310698       2000
Total                            5708350       4942

