pfSense bugtracker: Issueshttps://redmine.pfsense.org/https://redmine.pfsense.org/favicon.ico?16780521162024-03-28T15:30:27ZpfSense bugtracker
Redmine pfSense Plus - Feature #15368 (New): Bulk import DHCP host reservationshttps://redmine.pfsense.org/issues/153682024-03-28T15:30:27ZChris W
<p>It'd be a huge time saver to import from a CSV or XML file into Kea, or even just pasting into a text field like Firewall > Alias > Bulk Import currently does.</p> pfSense Plus - Bug #15361 (New): Error in virtual IP aliases when using IPv6 "network" / "broadca...https://redmine.pfsense.org/issues/153612024-03-25T09:20:00ZMathis Cavalli
<p>There is no network address in IPv6, nor broadcasts like IPv4<br />When adding / editing an IP alias and putting there an address like fd00::/64 it shows the following error : "The network address cannot be used for this VIP" <br />It happened on my pfSense+ box but it seems the CE 2.7.2 is also affected.</p> pfSense Plus - Bug #15332 (New): Kea doesn't start without any logs when upload config with addit...https://redmine.pfsense.org/issues/153322024-03-12T13:17:13Zaleksei prokofiev
<p>If the config has additioan DHCP pool with extra parametrs configured, such default-lease-time or max-lease-time, then KEA won't start with out any logs. To fix that need delete from config those extra option. Or just resave affected pool without any changes, it will lead rewrite config without extra options. <br />For example <br /><pool><br /> <range><br /> <from>192.168.6.2</from><br /> <to>192.168.6.48</to><br /> </range><br /> <descr><![CDATA[NTP Server]]></descr><br /> <defaultleasetime>600</defaultleasetime><br /> <maxleasetime>3600</maxleasetime><br />After resave it will deleted<br /><pool><br /> <range><br /> <from>192.168.6.2</from><br /> <to>192.168.6.48</to><br /> </range><br /> <descr><![CDATA[NTP Server]]></descr><br /> <defaultleasetime></defaultleasetime><br /> <maxleasetime></maxleasetime></p> pfSense Plus - Regression #15320 (New): XMLRPC Sync Trigger on CARP Maintenance Mode Causes webCo...https://redmine.pfsense.org/issues/153202024-03-08T03:13:23ZKris Phillips
<p>When syncing a large configuration file with a large number of Virtual IPs, XMLRPC Sync can cause the webConfigurator to completely hang on a secondary unit in an HA pair for several minutes. This can also lead to 504 Timeout messages. The webConfigurator will typically recover on it's own, but this will often take several minutes.</p>
<p>Disabling the Virtual IP portion of the XMLRPC sync resolves this issue and the failover is nearly instantaneous, along with complete responsiveness from the webConfigurator.</p>
<p>Likely improvements can be made to the PHP code to not just blindly copy and rebuild the entire Virtual IP configuration on the secondary unit, as these hangs can lead to high CPU load and responsiveness issues for the secondary firewall that you just failed over to. This is obviously less than ideal since that unit is supposed to be taking over traffic in a manual failover scenario.</p> pfSense Plus - Feature #15306 (New): Change Gateway Status from Pending to Unavailablehttps://redmine.pfsense.org/issues/153062024-03-03T01:25:28ZKris Phillips
<p>Per customer statement and request, gateway statuses of "Pending" are confusing as a state for gateways that do not exist yet due to dynamic allocation. Something like a state of "Unavailable" may be more appropriate wording.</p> pfSense Plus - Feature #15305 (New): Gateway Status Changes to Pending Do Not Trigger Gateway Log...https://redmine.pfsense.org/issues/153052024-03-03T01:22:28ZKris Phillips
<p>When a gateway transitions from an Online state to a Pending state, there is no logged event in the Gateway monitoring logs currently to state that the gateway has become unavailable.</p>
<p>Additionally, Email/System Notifications will send a notification for Gateway Up/Down events, but will not send a notification for changes to and from a Pending state. This would be useful for things like ISP equipment power loss or failures where the physical link is lost.</p> pfSense Plus - Bug #15303 (New): dpinger service does not always switch from Pending to Onlinehttps://redmine.pfsense.org/issues/153032024-03-02T17:07:07ZKris Phillips
<p>There are several situations where dpinger will not detect a gateway that is available when it should, forcing a restart of the dpinger service to "trigger" it to recheck.</p>
<p>Known situations, but there may be more:</p>
<p>1. Adding a new VTI tunnel as an interface<br />2. A release/renew of an IPv6 gateway (IPv4 gateway will show up, but IPv6 will not until a dpinger restart)<br />3. Adding an OpenVPN client/server as an interface</p>
<p>Related documentation redmine: <a class="external" href="https://redmine.pfsense.org/issues/15230">https://redmine.pfsense.org/issues/15230</a></p> pfSense Plus - Feature #15295 (New): State Filter Rule ID needs clarificationhttps://redmine.pfsense.org/issues/152952024-02-28T23:38:28ZMike Moore
<p>Not sure if this is a feature request but this isn't a bug.</p>
<p>See the forum post for details - <a class="external" href="https://forum.netgate.com/topic/186429/no-states-show-up-when-filtering-by-trackerid/5?_=1709161373761">https://forum.netgate.com/topic/186429/no-states-show-up-when-filtering-by-trackerid/5?_=1709161373761</a></p>
<p>Searching for states under Diagnostics/States/States and if you filter by Rule ID I mistakingly thought this meant TrackerID. The RuleID shows up if you hover over the state's entry of the firewall rule in the GUI and look at the bottom of the WebUI url and it will show what the corresponding ruleID is.</p>
<p>This doesnt make much sense considering if I search the firewall log in the WebUI and if i filter by "Rule Tracker ID" I can submit the TrackerID there and im able to narrow down my search whereas if i filter in the states screen nothing matches Rule ID because it's specifically looking for a number that the system generates for the Rule but there is no place in the UI to even know what that rule number could or would be.</p>
<p>The solution would be to either:<br />1. Fix the State filter so that it can filter by tracker ID instead of Rule ID<br />2. OR update documentation to inform users of the best place to find the rule ID.</p> pfSense Plus - Feature #15284 (New): Specify a Device parameter for Pushover Notificationshttps://redmine.pfsense.org/issues/152842024-02-22T03:14:10ZMichael Klein
<p>Hello,</p>
<p>Can you please add the ability to specify a DEVICE parameter for Pushover notifications so that a notification is sent to a specific device under that user account instead of ALL DEVICES under that user account? The menu is located at: System, Advanced, Notifications, Pushover.</p>
<p>Thank you!</p> pfSense Plus - Feature #15280 (New): Boot Environments 2.0https://redmine.pfsense.org/issues/152802024-02-21T19:59:52ZChristian McDonaldcmcdonald@netgate.com
<p>Changes:</p>
<ul>
<li>Configuration History is now a separate page and is no longer part of Backup & Restore.</li>
<li>Configuration History is now aware of Boot Environments. Supports downloading, deleting and restoring across boot environment boundaries.</li>
<li>System updates are now installed in an offline clone of the running system and booted "temporarily" to facilitate automatic fallback to previous working environment.</li>
<li>Boot Verification is performed when booting temporary Boot Environments. System will automatically reboot into prior boot environment upon boot failure.</li>
</ul>
<p><img src="https://redmine.pfsense.org/attachments/download/5936/clipboard-202402211456-bdjnl.png" alt="" /><br /><img src="https://redmine.pfsense.org/attachments/download/5937/clipboard-202402211457-fegcy.png" alt="" /><br /><img src="https://redmine.pfsense.org/attachments/download/5938/clipboard-202402211457-rbjkq.png" alt="" /><br /><img src="https://redmine.pfsense.org/attachments/download/5939/clipboard-202402211457-fcvqv.png" alt="" /><br /><img src="https://redmine.pfsense.org/attachments/download/5940/clipboard-202402211458-ydyne.png" alt="" /></p> pfSense Plus - Feature #15022 (New): Package install/reinstall feature request.https://redmine.pfsense.org/issues/150222023-11-22T01:23:31ZJonathan Lee
<p>Hello fellow Redmine community members. I have noticed time and time again I have the ability to scroll during package installs to see the what package dependencies are installing and to check version numbers but I can't get it to stay still for longer than a split second before it auto scrolls back to the bottom. Can we make this stay where users are when the scroll and remove the auto scroll function?</p>
<p>We currently have no way to see the dependency information after it scrolls past because auto scroll takes us back to the bottom again.</p>
<p>See attached photo, I wanted to check what dependency versions were installed, Everytime you scroll it defaults to bottom again.</p> pfSense Plus - Feature #14976 (New): Cleaner way to know if an interface failedhttps://redmine.pfsense.org/issues/149762023-11-13T15:36:44ZMike Moore
<p>When an interface status changes from UP to DOWN or is flapping, there are other syslog messages that get generated because of it, such as packages restarting and dpinger restarting interfaces, etc.. This makes finding root cause very difficult as one has to shift through the noise as i recently had to do.</p>
<p>See forum post here: <a class="external" href="https://forum.netgate.com/topic/184059/random-disconnect/12?_=1699889265804">https://forum.netgate.com/topic/184059/random-disconnect/12?_=1699889265804</a></p>
<p>Request: Maybe have Kernel messages in a separate tab in the System > Logs menu. Or maybe just have some method in the GUI to indicate that a link did flap - some notification.</p>
<p>Juniper Networks keeps a timer counter of when the link last flapped when a 'show interface' command is given. This is helpful in knowing when a link issue occurred.</p> pfSense Plus - Bug #14894 (New): Password protected console login prompt does not render properly...https://redmine.pfsense.org/issues/148942023-10-18T19:47:24ZJim Pingle
<p>After resolving other console issues with the 4100/6100/8200 in <a class="issue tracker-1 status-3 priority-4 priority-default closed" title="Bug: Serial console output fails to render properly in certain cases on 4100, 6100, and 8200. (Resolved)" href="https://redmine.pfsense.org/issues/13455">#13455</a> a problem remains with the login prompt.</p>
<p>It is not printing a newline before the FreeBSD version string nor is it printing a newline before the password prompt:</p>
<pre>
[...])FreeBSD/amd64 (pfsense.home.arpa) (ttyu0)
login: rootPassword:
Netgate 4100 [...]
</pre>
<p>It should look like this:</p>
<pre>
FreeBSD/amd64 (pfsense.home.arpa) (ttyu0)
login: root
Password:
Netgate 4100 [...]
</pre>
<p>Changing the console type doesn't have any effect, nor does changing various aspects of the TTY (e.g. setting it to <code>xterm</code> or <code>cons25w</code> instead of <code>vt100</code>, or using <code>std</code> instead of <code>3wire</code>).</p> pfSense Plus - Feature #14297 (New): Add Option for Vendor Class ID in DHCP Clienthttps://redmine.pfsense.org/issues/142972023-04-21T15:07:26ZKris Phillips
<p>Some ISPs require a Vendor Class ID be sent (option 60) when requesting DHCP. This can currently be accomplished in pfSense with vendor-class-identifier manually added to a dhcp config file, but adding this as a field would be helpful.</p> pfSense Plus - Bug #14005 (New): SFP Interfaces not available with Traffic Shaper in v23.01https://redmine.pfsense.org/issues/140052023-02-21T13:45:15ZBrendon Flint
<p>I have dual Netgate 1541 in HA mode. The SFP interfaces LAN (cxl1) and WAN (cxl0) are not available for configuration in v23.01. If I boot one of the Netgate's in to v22.05, both interfaces are available for configuration, but not when it boots to v23.01.</p>
<p>The problem exists with both Netgate 1541.</p>