pfSense

I attempted to set a IPV6 limiter along with an IPV4 limiter. I had previously had a QOS setup which was deleted, and the IPV4 limiter appears to be work appropriately.

Copying the floating rule from IPV4 to IPV6 rules and changing to IPV6 protocol and default gateway led to the following error:

There were error(s) loading the rules: /tmp/rules.debug:268: no routing address with matching address family found. - The line in question reads [268]: pass out quick on { mvneta0.4094 } $GWWAN_DHCP6 inet6 from any to any tracker 1633181102 keep state dnqueue( 2,1) label "USER_RULE: WAN IPV6 Limiter"
@ 2021-10-02 09:25:37

There is also syntactic variance between the IPV4 vs. IPV6 floating rule in that the IPV4 rule includes the IPV4 address, while the IPV6 is listed as dynamic. This also seen in the Systems -> Routing -> Gateways which is listed in the same format for for DHCP vs. DHCPv6 gateway.

This was on: 21.05.1-RELEASE (arm64) for SG-1100

I wonder if the lack of address is causing this error.