Actions
Regression #12866
closed
Disabled Captive Portal configuration prevents adding an interface to a bridge
Start date:
Due date:
% Done:
0%
Estimated time:
Plus Target Version:
22.05
Release Notes:
Default
Affected Version:
2.6.0
Affected Architecture:
Description
How to reproduce:
1) Create a Captive Portal on the OPT1 interface
2) Disable Captive Portal
3) Try to create a bridge interface with the interface OPT1.
Result:
The following input errors were detected: The interface () is part of the Captive Portal and cannot be part of the bridge. Remove the interface to continue.
input validation must check if Captive Portal is enabled or not
Related issues
Updated by Viktor Gurov about 2 years ago
- Related to Bug #6528: The captive portal cannot be used on interface lan since it is part of a bridge but works anyway added
Updated by Viktor Gurov about 2 years ago
- Target version set to 2.7.0
- Plus Target Version set to 22.05
Updated by Jim Pingle about 2 years ago
- Status changed from New to Pull Request Review
Updated by Viktor Gurov about 2 years ago
- Status changed from Pull Request Review to Feedback
Updated by Christopher Cope about 2 years ago
- Status changed from Feedback to Resolved
Tested on
22.05-DEVELOPMENT (amd64) built on Tue Mar 08 06:20:23 UTC 2022 FreeBSD 12.3-STABLE
Working correctly. Marking resolved.
Updated by Jim Pingle about 2 years ago
- Subject changed from Bridge interface creation input validation error to Disabled Captive Portal configuration prevents adding an interface to a bridge
Updating subject for release notes.
Actions