Project

General

Profile

Actions

Feature #1933

closed

Support for interface groups in NAT screens

Added by Chris Buechler over 10 years ago. Updated almost 4 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
-
Category:
Rules / NAT
Target version:
Start date:
10/07/2011
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:

Description

would be nice to have support for interface groups in the NAT screens

Actions #1

Updated by Jim Pingle over 9 years ago

Outbound NAT might be feasible but for port forwards this could be problematic as the group rules wouldn't get reply-to so the end result wouldn't be what the user expects.

Actions #2

Updated by Ermal Luçi over 9 years ago

You would have to split the user rule(s) with respective reply-to.

Actions #3

Updated by Jim Pingle about 4 years ago

  • Target version set to 2.4.4
Actions #4

Updated by Jim Pingle almost 4 years ago

  • Status changed from New to Feedback
  • % Done changed from 0 to 100

Implemented by https://github.com/pfsense/pfsense/pull/3912 which was merged a few months ago

Actions #5

Updated by Anonymous almost 4 years ago

On 2.4.4.a.20180810.1552, was able to create an Interface Group, then a NAT Port Forward using the newly created Interface Group (associated rule was also created on the Interface Group at Firewall > Rules). A Outbound NAT mapping using the Interface Group was also successfully created.

Actions #6

Updated by Anonymous almost 4 years ago

  • Status changed from Feedback to Resolved
Actions

Also available in: Atom PDF