Project

General

Profile

Actions
Copy link

Bug #5321

closed

rxcsum6, txcsum6 not considered by "Disable hardware checksum offload"

Added by tok red over 8 years ago. Updated about 7 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
Luiz Souza
Category:
Interfaces
Target version:
2.3.3
Start date:
10/20/2015
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
All
Affected Architecture:

Description

On pfsense 2.2.4 installed on ESXi 6.0 with vmxnet NICs, I noticed that disabling hardware checksum offloading via Web GUI does not disable the IPv6 variants rxcsum6 and txcsum6 (see ifconfig(8)). ifconfig still shows the following features after reboot:

vmx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=600098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
    [...]

Please also include rxcsum6 and txcsum6 when disabling hardware checksum offload.

Thanks

Actions
Copy link
 #1

Updated by Chris Buechler over 8 years ago

  • Category set to Interfaces
  • Status changed from New to Confirmed
  • Affected Version changed from 2.2.4 to All
Actions
Copy link
 #2

Updated by Jim Thompson about 8 years ago

  • Assignee set to Luiz Souza
Actions
Copy link
 #3

Updated by Luiz Souza over 7 years ago

  • Status changed from Confirmed to Feedback
  • % Done changed from 0 to 100

Fixed in 2.4.

Actions
Copy link
 #4

Updated by Jim Pingle about 7 years ago

  • Target version set to 2.3.3
Actions
Copy link
 #5

Updated by Renato Botelho about 7 years ago

  • Status changed from Feedback to Resolved

works

Actions
Copy link

Also available in: Atom PDF