Bug #6239
closed
DHCP server NTP fields should allow hostnames
0%
Description
NTP server fields on DHCP Server config page only allow IPs. That works fine with FQDNs now, IIRC it didn't in the past.
Same restriction exists on DHCPv6 Server, but dhcpd won't start with FQDNs there so that's correct.
fix coming momentarily
Updated by Chris Buechler over 8 years ago
- Status changed from Confirmed to Feedback
Updated by Edward Hurtig about 8 years ago
Chris Buechler wrote:
works
Form validation does now allow hyphens in the NTP server name
Separate Issue Incoming
Updated by Beat Siegenthaler almost 5 years ago
Chris Buechler wrote:
Same restriction exists on DHCPv6 Server, but dhcpd won't start with FQDNs there so that's correct.
Is this (annoying) restriction still valid?
In 2.4.4p3 i get following error:
The following input errors were detected:
A valid IPv6 address must be specified for the primary/secondary NTP servers.
Updated by Viktor Gurov almost 5 years ago
Beat Siegenthaler wrote:
Chris Buechler wrote:
Same restriction exists on DHCPv6 Server, but dhcpd won't start with FQDNs there so that's correct.
Is this (annoying) restriction still valid?
Valid:
Internet Systems Consortium DHCP Server 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
/etc/dhcpdv6.conf line 19: Invalid IPv6 address.
option dhcp6.sntp-servers ntp1.
^
Configuration file errors encountered -- exiting
no changes in the latest isc-dhcp 4.4.2