Actions
Bug #7713
closed
APU2C4 + TRAFFIC SHAPER CBQ = KERNEL PANIC
Status:
Rejected
Priority:
Very Low
Assignee:
-
Category:
Traffic Shaper (ALTQ)
Target version:
-
Start date:
07/21/2017
Due date:
% Done:
0%
Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.3.4
Affected Architecture:
amd64
Description
Hardware APU2C4
Pfsense 2.3.4_1
Coreboot 4.0.7
As soon as you activated traffic shaper with CBQ, there is a kernel panic all the appliance is dead.
With HFSC it's working without issue.
Please correct this major issue or remove CBQ option when detected hardware is PC Engines APU2
Kind regards,
Julien R.
Updated by Julien REVERT over 7 years ago
The issue occur with a simple install with at least 1 vlan (vlan number2).
Without VLAN the issue doesn't occur.
I have :
wan ->igb0
lan -> igb2
voice -> igb2_vlan2
Updated by Jim Pingle over 7 years ago
- Status changed from New to Rejected
- Priority changed from Urgent to Very Low
Please discuss the problem on the forum before opening a bug report.
It is highly unlikely that we will make special considerations for just that hardware platform, especially when it's a hardware platform that we do not officially support.
Actions