Project

General

Profile

Actions

Feature #9791

closed

Ability to filter Diagnostics ARP Table by IP range (DHCP)

Added by John Weithman about 2 years ago. Updated almost 2 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
Category:
Diagnostics
Target version:
Start date:
09/25/2019
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:

Description

It would be nice to be able to filter the ARP table to find a particular (new) device.

In my instance I have turned on a new device that should get an address from DHCP (so filter on range that is handed out). Then I can sort the results by Status which should show the most recent (using Expiration).

Not sure how useful sorting/filtering MACs by OUI (ie Microsoft, Dell, HTC, Apple, etc.). OUI may not be accurate but useful as a starting point.


Files

Actions #1

Updated by Jim Pingle about 2 years ago

  • Category set to Diagnostics
Actions #2

Updated by John Weithman about 2 years ago

I had requested an Alias feature which was pointed out to be already implemented (I have many configured - just forgot about them). If filtering is added to ARP, filtering by defined Aliases would be a nice add on.

Actions #3

Updated by Jim Pingle about 2 years ago

  • Assignee set to Jim Pingle
  • Target version set to 2.5.0
Actions #4

Updated by Jim Pingle about 2 years ago

  • Status changed from New to Feedback
  • % Done changed from 0 to 100
Actions #6

Updated by Jim Pingle about 2 years ago

  • Status changed from Feedback to Resolved
Actions #7

Updated by Jim Pingle almost 2 years ago

  • Target version changed from 2.5.0 to 2.4.5
Actions #8

Updated by Jim Pingle almost 2 years ago

  • Status changed from Resolved to Feedback

Needs checked and/or tested again on 2.4.5 snapshots

Actions #9

Updated by Jim Pingle almost 2 years ago

  • Status changed from Feedback to Resolved

Search and sort works on all the pages listed in the commit on 2.4.5.a.20191217.0637.

Actions

Also available in: Atom PDF