Activity
From 02/10/2023 to 03/11/2023
03/11/2023
-
09:37 PM Feature #13786: ldap intergration for firewall rules
- Mike Moore wrote in #note-4:
> So there is no way in the future to create a LAN rule stating
> Src: AD/mmoore
> Ds... -
- There is already an option to reinstall packages from Diagnostics --> Backup and Restore. It would be beneficial for...
-
- Typically right now we also have issues with the installer converting from gmirror to ZFS. Haven't tested since 22.0...
-
12:30 PM Bug #13981 (Resolved): PHP Error on ``status_interfaces.php`` with empty switch VLAN group configuration and assigned VLAN interfaces
- Replicated the issue on SG-2100....
03/10/2023
-
10:29 AM Bug #14068 (Closed): Importing Chained Cert Data into the System --> Cert Manager --> Certificates Breaks Authentication
- Kris Phillips wrote in #note-2:
> The message of "Unknown CA" is what pfSense is sending to the remote host. This w... -
- Jim Pingle wrote in #note-1:
> Allowing multiple CAs in a single entry was always a hackish workaround for things th...
03/09/2023
-
- When testing with a customer, when a remote host has a large number of new states being created, then transitioning t...
-
07:02 AM Bug #14085 (New): QAT not working / same speed as AES-NI with CPIC-8955!
- My post on the netgate forum, still no unanswer:
https://forum.netgate.com/topic/175096/ipsec-with-qat-low-performan...
03/08/2023
-
06:57 PM Regression #13895: Early boot hangs on Hyper-V with Gen2 VMs
- I can't repro it in Win-11 Hyper-V. 4GB, ZFS, 3 NICs, ISO still attached.
In the loader prompt (option 3), can you... -
- Reid Linnemann wrote in #note-2:
> Do we want to cut the cord on UFS and just be done with it?
UFS is OK and not ...
03/07/2023
-
11:02 PM Regression #14080: Installer fails to install to a geom mirror
- Do we want to cut the cord on UFS and just be done with it?
-
- You can get past that point by manually setting the UFS slice on the mirror to mount at @/@ though it still fails eve...
-
06:12 PM Regression #14080 (New): Installer fails to install to a geom mirror
- The 23.01 installer fails to create the expected mount points when trying to reinstall UFS to an existing gmirror.
... -
12:21 PM Bug #14074: Cannot edit or delete ZFS Boot Environment with a name containing only numbers
- more experimentation
if i create a new environment with the same name as the old damaged ones (now 0 or 1) it create...
03/06/2023
-
- Fix for this is introduced into pfSense-updgrade at revision 2c4bf3c in plus packages only at this time. pfSense-upgr...
-
- did some more trials, and found if i just use the date as 20230306 it does it.
named it 20230306, the other day i na... -
- to get the initial issue;
what i did; i didnt read the limitation of what characters could be used, and used a "-"... -
- There must be some additional steps needed to replicate the problem. I tried a 23.01 system here and I could create a...
-
- now that it has this new boot environment '0' if i try to edit it, it makes a new boot environment. Each time.
ho... -
- Allowing multiple CAs in a single entry was always a hackish workaround for things that didn't support chains. Import...
03/05/2023
-
03:43 PM Regression #13895: Early boot hangs on Hyper-V with Gen2 VMs
- This can be replicated on Azure as well. Deploy a new pfSense+ 23.01 Gen 2 VM on Azure with a size which allows addin...
-
- Are you able to replicate this reliably? If so, please detail the steps to do so.
-
i just created a new boot environment, but it apparently didnt like the name i gave it and set it to '0'
It cann...
03/03/2023
-
- Previously, including the entire CA chain as well as the client certificate in the certificate under System --> Cert ...
-
09:20 AM Feature #14066 (New): Add line number to rules and insert option
- From a rule management perspective, is it possible to do the following:
1. Add line numbers in the GUI. So an admin ...
02/28/2023
-
- Ryan Coleman wrote in #note-5:
> Ok so it is not available to 23.01 -- it would have to be a point release then?
... -
- This behavior has existed for as long as I can remember. For example, the "Getting Started" guides for all appliances...
02/27/2023
-
04:02 PM Bug #14044 (Not a Bug): After upgrade to 23.01, firewall will not route traffic anymore to the Internet
- After upgrading to 23.01, if the WAN interface receives an IP address from the same range of addresses as configured ...
-
03:05 PM Regression #13993: Switch ports on 7100/1100/2100 do not have Auto MDI-X support enabled
- Jim Pingle wrote in #note-4:
> Ryan Coleman wrote in #note-3:
> > Luiz Souza wrote in #note-1:
> > > Fixed in 23.... -
- Ryan Coleman wrote in #note-3:
> Luiz Souza wrote in #note-1:
> > Fixed in 23.05 and also in the 23.01 branch.
> ... -
- This appears to be the same as #8600 and to fix it then, we suppressed that error.
-
07:44 AM Bug #13976: SNMP logs "Device not configured" error message when queries involve built-in switch port interfaces
- Ditto. Same here after upgrading HA 7100's from 22.05 to 23.01....
02/26/2023
-
- Luiz Souza wrote in #note-1:
> Fixed in 23.05 and also in the 23.01 branch.
I don't see any recommended patches -...
02/25/2023
-
07:13 PM Regression #13993: Switch ports on 7100/1100/2100 do not have Auto MDI-X support enabled
- running version 23.05.a.20230224.0600 on 7100 I am again able to successfully connect with 1100, this was not working...
02/24/2023
-
05:47 PM Feature #14012: ZFS memory usage graphs
- This feature request is probably related: zfs GUI functionality - alerts https://redmine.pfsense.org/issues/9226 but ...
02/22/2023
-
03:22 PM Regression #13993 (Feedback): Switch ports on 7100/1100/2100 do not have Auto MDI-X support enabled
- Fixed in 23.05 and also in the 23.01 branch.
-
02:38 PM Feature #14017 (New): Ability to remove all packages before upgardes with saved configuration
- Currently, every time when a new upgrade is available the first thing recommended to do is uninstalling all packages....
-
02:24 PM Bug #14005: SFP Interfaces not available with Traffic Shaper in v23.01
- !pfsense-22.05.png!
!pfsense-23.01.png!
-
10:22 AM Bug #13975: when assigning a vlan to wan interface configured mac address is not used
- I've done some more testing.
I now have the physical interface igc0 set as opt1. In that interface is set the want... -
- It's becoming increasingly relevant for users to monitor ZFS memory usage, especially ARC usage. This is ideal as a s...
-
- Fix committed to plus tree (@5841d5850265476100b719e60e38b65887cd1460@).
You can install the "System Patches packa... -
- To trigger this you also need at least one assigned VLAN tagged interface -- it need not be on the switch interface.
-
02/21/2023
-
- I have dual Netgate 1541 in HA mode. The SFP interfaces LAN (cxl1) and WAN (cxl0) are not available for configuration...
02/20/2023
-
- In 23.01 the 7100 switch ports do not support auto-MDI/X. A cross-over cable is required to link two ports on the swi...
02/19/2023
-
- For reference, the @<vlangroups>@ element in @/cf/conf/config.xml@ can be removed to work around the issue (e.g. by u...
-
- This is triggered by the presence of empty <vlangroups> tags in the switch config which are not usually there.
The... -
- For reference, the firmware may be re-installed (rather than upgraded) to work around the issue.
02/18/2023
-
- Devices with switches are hitting this after upgrading to 23.01....
02/17/2023
-
07:00 AM Bug #13976 (Resolved): SNMP logs "Device not configured" error message when queries involve built-in switch port interfaces
- SNMP polls cause the following errors in system logs:
Feb 17 12:52:11 snmpd 9415 SIOCGIFDESCR (e6000sw0port1): De... -
- I've tried the configuration on a sg-3100, that does exactly the same. Once you set the wan interface to the .34 inte...
-
- I just updated my 22.05 to 23.01, and I noticed my mac address I configured in the physical interface was not getting...
02/16/2023
-
- In some situations an upgrade to 23.01 on an 1100 or 2100 will fail after the upgrade process is unable to update the...
-
- That code only exists in Plus, and it's in the factory ports repo under @sysutils/pfSense-ec2_setup@
-
- The ec2_setup.php file contains code that is not compatible with PHP 8.1....
02/12/2023
-
- That’s why I said that errors in packages are irrelevant
User runs 22.05 and has no errors in packages - BE “defa... -
11:57 AM Bug #13949: Boot Environments do not seem to cleanly restore the system
- There is some conflating of issues here. What I'm saying is, the issue with pfBlockerNG specifically wasn't unique to...
-
- IMHO errors with packages are irrelevant.
User expectations are that BE switches in between different pfS versions... -
- That issue with pfBlockerNG isn't related to BEs. I've seen it and I addressed it. It was also impacting CE 2.6.0
... -
- `pfBlockerNG-devel` had errors:...
-
- We're going to need more information. What errors ?
-
- I tried and set up 25.01RC and had a minor issue so decided to roll back to 22.05.
To my surprise, after restoring...
Also available in: Atom