Activity
From 09/29/2023 to 10/28/2023
10/27/2023
-
06:48 PM Feature #14928 (New): FEATURE REQUEST: Wireless ath0 and MAC address controls
- @ifconfig ath0_wlan0 list mac@
This has the ability to have a ACL lists added. Can we please have the ability to m... -
03:07 PM Bug #14927 (Not a Bug): Wireless Interfaces Speed and Duplex settings will not save
- You don't set those yourself on Wireless interfaces, they are determined by the chosen standard and other settings.
-
- Hello fellow PfSense Redmine community members,
I recently noticed that the Speed and Duplex settings will not sta... -
- That file is from FreeBSD -- if you want to suggest changes, propose them upstream:
https://github.com/freebsd/fre... -
- <maxpower>17</maxpower>
<maxpower>30</maxpower>
<maxpower>23</maxpower>
Does others feel this is very restri...
10/26/2023
-
- Hello Fellow pfSense Redmine members,
I wanted to bring this to your attention. I noticed and learned that the reg...
10/25/2023
-
- Closing this since armv7 support is being dropped upstream, so there won't be any way to resolve this.
-
- Looks good on latest build. 4100 and 6100 loader/BE menus no longer have any extra non-printable/random odd character...
10/24/2023
-
02:54 PM Feature #14915 (New): MAC-aliasses / Lists with MAC-addresses would be very helpfull
I would like to create a MAC-filter using the Ethernet layer firewall and it is absolutely not practical / a good i...-
01:52 PM Bug #13569: Restarting an OpenVPN server running on a CARP VIP in an HA cluster can disrupt unrelated TCP states
- Same issue on pfsense 2.7,
I confirm that ...
10/23/2023
-
02:32 PM Regression #14912: WAN Interfaces No Longer Able to Use Gateway Outside Subnet
- Jim Pingle wrote in #note-1:
> I can't replicate this as stated. If I add a new route that is outside the subnet (e.... -
- I can't replicate this as stated. If I add a new route that is outside the subnet (e.g. by setting the interface as a...
-
- In pfSense Plus 23.09 BETA there seems to be a regression of this former bug:
https://redmine.pfsense.org/issues/972...
10/22/2023
-
11:28 AM Regression #14828: QAT is not being used by some daemons
- I've just tried 23.09.b.20231020.0600 on qat_200xx equipped hardware (Xeon D-1736NT) and I can see that the revision ...
-
- Hi Kris,
No change with 23.09 BETA, including 23.09.b.20231020.0600 for QAT on C3xxx QAT hardware (Netgate 6100 in...
10/21/2023
-
10:06 PM Bug #14818 (Confirmed): StatusTraffic Graph In/Out traffic misplaced in Graph but correct in text table
- It looks like this happens when the Sort By dropdown is set to Bandwidth Out. Using pfSense as an iperf server and a ...
-
- Rob A wrote in #note-3:
> I still see demonstrable difference between 23.05 and 23.09 dev with QAT. QAT is active o... -
- Tested on 23.05.1 and 23.09 there is still significant boot times for the WAN interface being down and the webConfigu...
-
02:41 PM Feature #14387: Offline config mode
- Can you confirm you are still having this issue on 23.05.1?
The original redmine is resolved and testing with 23.0...
10/20/2023
-
- This site is not for support or diagnostic discussion.
For assistance in solving problems, please post on the "Net... -
07:23 PM Bug #14902 (Not a Bug): Package Manager available list empty
- This seem to have happened after pfSense Plus 23.05.1 upgrade. Although I don't know the exact time frame. I am unabl...
10/19/2023
-
- Thanks for looking into this
-
07:57 AM Bug #14705 (Feedback): Changes in Ethernet ruleset can lead to incorrect rule and separator order
- I was finally able to replicate this issue fairly consistently (albeit not every single time). A fix is now in place ...
10/18/2023
-
- I created a separate issue for the remaining login prompt problem: #14894
-
- Chris Mirchandani wrote in #note-16:
> This Redmine was specifically opened for the password protected issue. In the... -
06:33 PM Bug #13455: Serial console output fails to render properly in certain cases on 4100, 6100, and 8200.
- This Redmine was specifically opened for the password protected issue. In the process of looking into that issue you ...
-
- Fix committed: https://gitlab.netgate.com/pfSense/factory/-/commit/69b321f6d5153ed0e8146abf716cee6f8cd98646
-
- The unusual characters in the loader clear up if we set the console to @efi@ explicitly on affected platforms (4100, ...
-
- After resolving other console issues with the 4100/6100/8200 in #13455 a problem remains with the login prompt.
It...
10/16/2023
-
- The package manager servers are the same for Plus on Netgate and non-Netgate hardware for amd64 systems. There do not...
-
03:10 PM Regression #14883 (Not a Bug): Package Manager in 23.05.1 broken
- Hello,
Package Manager on 23.05.1 is not showing Available packages now, as if the repo is offline or something. ... -
03:09 PM Regression #14180: ConnectX-4 LX MCX4121A-ACAT - VT-d passthrough of both ports, virtualized pfSense fails to boot due to mlx5 driver errors
- Hi, thanks for looking into it.
My setup was already EFI-based. I've long since abandoned the Mellanox card and am...
10/15/2023
-
06:52 AM Bug #14879: Disabling DNS Rebinding Checks deletes private domains from unbound config
- According to johnpoz in the linked forum thread, DNSSEC validation fails. This would explain why it is not working an...
-
03:01 AM Regression #14180: ConnectX-4 LX MCX4121A-ACAT - VT-d passthrough of both ports, virtualized pfSense fails to boot due to mlx5 driver errors
- see if it makes any difference booting EFI with your setup - https://docs.netgate.com/pfsense/en/latest/recipes/virtu...
10/14/2023
-
- This will make Domain Overrides not work anymore, at least with split DNS.
More Details are described here: https:/...
10/13/2023
-
-
05:55 PM Bug #14478: Ethernet rules using ``(self)`` as a source or destination make the ruleset fail to load
- tested on:
Version 23.09-BETA (amd64)
built on Fri Oct 13 6:00:00 UTC 2023
FreeBSD 14.0-CURRENT
this version has ...
10/12/2023
-
01:09 PM Bug #14837: some services show can't start
- Wireguard is connected, but it shows that the service has not been started.
10/11/2023
-
12:33 AM Bug #14862 (New): netstat nexthop queries fail on an arm32
- Using the -o or -O switches with netstat to get nexthop data fails or shows bad data on arm32 devices....
10/09/2023
-
- I read some information and experience and tried it. My point is not to rule out any possibility, but to face the pro...
-
- No, according to research, it is caused by your parameter configuration and PHP code design issues. My hardware resou...
-
- Those parameters are already adjusted based on system memory. There have been no other similar reports of problems wi...
-
- There isn't nearly enough detail here to tell what is happening on your system in your environment, but it's not a ge...
10/08/2023
-
- I initially found the reason. The parameters in php-fpm.conf are incorrect and cannot adapt to high load conditions.
...
10/06/2023
-
- The system cannot complete the restart process.
The system has been stuck and cannot complete the restart process, b... -
- Regarding PHP-FPM, webgui crashes and freezes when the system load is relatively heavy, such as when there are a larg...
10/05/2023
-
- The fix for this was merged last week.
-
- /firewall_virtual_ip.php: The command '/sbin/ifconfig tun_wg0 inet6 'fe80::981f:60ff:fee9:56d3' -alias' returned exit...
-
- wireguard up online, but wg service show down.
10/04/2023
-
- I can't reproduce anything like this. UPnP starts fine here, for example. Please post on the forum and diagnose these...
-
- 23.09-DEVELOPMENT (amd64)
built on Wed Oct 4 17:15:00 CST 2023
FreeBSD 14.0-CURRENT
status_services.php
wireg... -
- Still happens with one of the two VPNs
23.09-DEVELOPMENT (amd64)
built on Tue Oct 3 14:00:00 CST 2023 -
- The expected order is the order shown on https://docs.netgate.com/pfsense/en/latest/solutions/netgate-6100/io-ports.h...
-
10:36 AM Feature #14835: Nics name netgate 6100
- Or is this the norm for this box?
https://docs.netgate.com/pfsense/en/latest/solutions/netgate-6100/io-ports.html -
- Hello. I think that the WAN interfaces on the netgate 6100 *box* are now called incorrectly.
Like now:
WAN1 = ix3, ...
10/03/2023
-
11:03 AM Bug #14824: OpenVPN instance on IPv6 PPPoE interface does not always start automatically
- Tested on:
23.01-RELEASE (amd64)
built on Fri Feb 10 20:06:33 UTC 2023
FreeBSD 14.0-CURRENT
(all official pat...
10/02/2023
-
- I still see demonstrable difference between 23.05 and 23.09 dev with QAT. QAT is active on 23.05 for all on-device e...
-
- Waiting on more info from the OP on the forum since it's not clear there is actually a problem yet. The items we expe...
-
- QAT isn't broken, it is working with IPsec and OpenVPN DCO which is expected since they are in the kernel.
It isn't ... -
- QAT not working. Issue identified on Netgate 6100 and subsequently confirmed on a 4100 unit. Issue confined to 23.0...
-
- log after rebooting the device (everything ok):
Oct 2 16:52:53 openvpn 39792 Initialization Sequence Completed
... -
- Probably the same problem that I extinguished (from version 23.05.1)
https://redmine.pfsense.org/issues/14811#chan...
10/01/2023
-
- This sounds like an issue with ordering and PPPoE. Likely the PPPoE connection isn't started prior to the OpenVPN Cl...
09/30/2023
-
- getting unknown oid in the latest build 23.09.a.20230929.2350
-
- you can use the following to disable the blue blinking indicator on 4100/6100/8200 systems...
-
- This problem occurs again
-
- I just updated to this version and this problem did not occur. I will continue to observe and report in the future.
... -
- my WAN is pppoe.
-
06:55 AM Bug #14824: OpenVPN instance on IPv6 PPPoE interface does not always start automatically
- Can't reproduce it, tunnel on IPv6 only interface starts immediately after a reboot.
tested on ... -
- tested on
23.09-DEVELOPMENT (amd64)
built on Fri Sep 29 21:07:00 CST 2023
FreeBSD 14.0-CURRENT -
- openvpn use ipv6 WAN, When pfsense restarts the system, openvpn ipv6 can't autostart. It must be started manually. Af...
09/29/2023
-
- Yes but the settings on that traffic graph page can be configured in numerous different ways and how you have that pa...
-
12:56 PM Bug #14818: StatusTraffic Graph In/Out traffic misplaced in Graph but correct in text table
- It is a super simple configuration.
One public WAN, one local LAN, only one local client IP
Just look on the pict... -
- Can you show more of the screenshot there to see all of your current settings when that behavior is observed?
Also... -
- StatusTraffic Graph In/Out traffic misplaced in Graph but correct in text table
See attached picture
Also available in: Atom