Activity
From 01/19/2011 to 02/17/2011
02/17/2011
-
01:05 PM Bug #1284: Syslog does not work with CLOG disabled
- Maybe I found the problem.
On system boot, it checks if disablesyslogclog tag exists on config.xml, then create re... -
07:31 AM Feature #1225 (Closed): static port range and outbound rules source port range (only to be tested and integrated, already coded)
-
02:39 AM Feature #1225: static port range and outbound rules source port range (only to be tested and integrated, already coded)
- I can't find how to close the task myself, so if someone could tell me how to (if I can!) or could close it...
-
- This is rendered useless by support of port alias. No need to implement this anymore.
-
04:07 AM Bug #1291 (Closed): Inner VPN Roadwarrior IPSEC in Tunnel VPN IPSEC not working with Firewall Scrub enabled
- Running 2.0-BEAT5 (i386) built on Tue Feb 15 16:36:07 EST 2011.
WAN is an xl0 ethernet card, LAN is a sge0 ethernet ... -
02:20 AM Bug #1290 (Closed): IPsec roadwarrior use case: Traffic from LAN does not hit established tunnel
- Hello.
Remote Access IPsec client (Shrew) connecting to pfSense firewall terminating the IPsec connection does not... -
- Hello.
IPsec mobile client configuration (Hybrid XAuth Server) does not put 'passive on' directive into racoon.con...
02/16/2011
-
10:07 PM Bug #1221 (Resolved): igb driver mbuf allocation problems on multicore machines aka Could not setup receive structures
-
09:48 PM Bug #1221: igb driver mbuf allocation problems on multicore machines aka Could not setup receive structures
- Been testing hw.igb.num_queues="4" for the last week and so far it seems to be working with no problems so far with H...
-
09:16 PM Bug #1288: Single Wan multi Lan Traffic Shaper Wizard :: "You do not have 2 of local interfaces!"
- Update to reference this forum thread where a similar (though single lan) issue appears to be affecting another test ...
-
- My test box has 3 total interfaces, all of which are properly connected to physical interfaces and function on their ...
-
- OK. I'll close this out. Feel free to post on the forums to see if anyone else has hit any similar VLAN issues.
-
06:46 PM Bug #1287: CARP VIP sync sends incorrect interface
- Yep, that's the issue, thanks Jim. I'm still having some trouble with the VLAN(s) passing traffic after failing over ...
-
- Check your config.xml on both - for CARP sync to function correctly the interfaces must exist on both units and they ...
-
- When the CARP VIPs are set to sync from Master to Backup under the CARP Settings it immediately adds new VIPs to the ...
-
03:53 PM Bug #943: 2.0-BETA4 Dynamic DNS updates not working
- R B wrote:
> Unfortunately I disagree - still not seeing DDNS update on a clean install of the NanoBSD images as not... -
11:50 AM Bug #943: 2.0-BETA4 Dynamic DNS updates not working
- Unfortunately I disagree - still not seeing DDNS update on a clean install of the NanoBSD images as noted in comment ...
-
- Reinstall the package again, it should be OK now.
-
02:47 AM pfSense Packages Bug #1084: nmap package libpcap errors
- This error is back in 2.0-RC1
/libexec/ld-elf.so.1: Shared object "libpcap.so.1" not found, required by "nmap"
... -
06:30 AM Feature #1286 (Closed): Captive Portal sends WAN IP instead of Mac or custom string in "called-station-id" RADIUS attribute
- The Captive Portal is sending the WAN IP in the RADIUS "called-station-id" attribute.
It has been mentioned before i... -
03:48 AM Bug #1053: CBQ per se, in kernel
- any update on this?
-
- I installed the nmap package and when I go to Diagnostics -> NMap, I'm redirected to the dashboard page. When I run n...
02/15/2011
-
- I put the tag disablesyslogclog on my config.xml to disable clog, since I have free disk space and want to keep all l...
-
-
10:02 AM Bug #1280: DHCP range validation is wrong then adding static mapping
- Sorry, verified with 2.0-RC1 (i386) built on Mon Feb 14 03:24:30 EST 2011
-
- This issue has been solved.
My DHCP range is 192.168.10.10 to 192.168.10.199
Static mapping to:
192.168.10.9 -... -
08:40 AM Bug #754: hifn driver and AES192 and 256
- I did the test with and without glxsb activated. There was no difference in the results.
Could it be that the hifn... -
- F S wrote:
> Test System: alix 2d2 + vpn1411 card.
> Beta Version: pfSense-2.0-RC1-4g-i386-20110214-0324
>
> see... -
03:20 AM Bug #754: hifn driver and AES192 and 256
- Test System: alix 2d2 + vpn1411 card.
Beta Version: pfSense-2.0-RC1-4g-i386-20110214-0324
seems like the vpn card... -
- I think this can be closed now...
I've been testing it for about Two weeks and it works fine.
02/14/2011
-
07:04 PM Bug #1283 (Resolved): Wording in script for configuring interfaces
- In pfSense-2.0-beta5-20110210 there are a few sentences in the script for initially configuring interfaces that are w...
-
- I do not agree and I do have logging on by default on block
I have 3 interfaces, WAN, LAN and DMZ
I added one ... -
- It already does log:...
-
- I have spent hours of debug different network configurations and VPN configurations (IPsec and OpenVPN) just to find ...
-
- Ideally you shouldn't have the parent interface of VLANs assigned. If you use VLANs on a physical interface, anything...
-
- I setup a alix 2d2 box for some pfSense 2.0RC1 tests. Used image is pfSense-2.0-RC1-4g-i386-20110214-0324-nanobsd-upg...
-
- I did a test with my alix 2d2 box and a vpn1411 card.
Here are the results with the fresh updated image (pfSense-2... -
06:27 AM Bug #475: L2TP is not functional in the way users will expect
- Another helpful link
http://kuapp.com/2010/07/14/how-to-setup-l2tpipsec-vpn-on-freebsd.html
02/13/2011
-
- thanks. I also confirmed this a few days ago
-
- Ermal Luçi wrote:
> Patch committed please test.
I can verify pfSense 2.0 beta 5
When I first start to surf fr... -
- Applied in changeset commit:"49e4ebf8348d32e0ecc2dc7f9dc9d1d113c765ca".
-
- I'm using pfSense 2.0 beta5
DHCP range is 192.168.10.10 to 192.168.10.200
Static mapping to:
IP 192.168.10.201...
02/11/2011
-
- This has been committed to repo.
Please test. -
- It should be read only by the end of the boot process, but it doesn't seem to be making that change when packages wer...
-
08:28 AM Bug #1278 (Resolved): log when captive portal restarts
- Hi,
When captive portal is reconfigured, it restarts and disconnects all clients. We have a message on the service... -
- /tmp/ath0_wlan0_setup.sh has the below
/sbin/sysctl dev.ath.0.diversity='0'
/sbin/sysctl dev.ath.0.txantenna='1'
... -
-
- If it does not work and you want the max length please put a 0 in there instead of 65k.
-
05:08 AM Bug #1276 (Closed): Packet capture for wireshark desn't work
- When the packet size is set to 65535, the form reset the value and the import in wireshark doesn't work.
-
- This was a bug which is fixed.
There is no magic autofix for this rather than telling people to clean their config.
... -
- This cannot be achived in 2.0 timeframe.
-
-
-
- This is more a confusion between what a non-quick rule can match or not rather than it does not work.
Its not a bug ... -
- When the rip is activate, and set to Ripv2 with password, all interface broadcast a RIPv1 response.
-
02/10/2011
-
11:58 PM pfSense Packages Bug #585: Unable to start the ntop service
- I hate being an utter n00b, but how does one attempt to install the various missing packages? I would love to get n...
-
- That's true of all browsers, you'll have to use one of the alternate themes that lists the menus down the left side o...
-
09:49 PM
Bug #1275 (Closed): Web management GUI; "Help" menu wraps around, and blocks access to "System" menu.
- See attached screenshot.
I have my web browser set up to use a slightly larger font size, due to limited eyesight.... -
- confirmed fixed in latest snapshots.
-
12:19 PM Bug #1271: My VPN (openvpn + Ldap) still broken
- Tradução do português para inglês
But with this bug but
includes the export script on the client side command po... -
- Ermal said he'd have a look at the filter.inc part when he gets a chance. Every other reference to the old style conf...
-
- I fixed the places in the GUI that you saw (in a more general way) but the filter.inc changes need more care. What yo...
-
- Well it depends. If they match the rule than they work otherwise they don't.
I think i should teach the match rules e... -
- Applied in changeset commit:"bda131b275f0761f15533da8dc633a4c0a452bf2".
-
- Committed, thanks!
-
- There are two bugs in functions which compare pfSense versions.
It doesn't work when update version is older than th... -
- Peter Overtoom wrote:
> I don't know when it's supposed to be fixed but when trying yesterday on a fresh 1.2.3 insta... -
05:26 AM Bug #1154: Kernel panic after connecting to OpenVPN
- I don't know when it's supposed to be fixed but when trying yesterday on a fresh 1.2.3 install with openvm tools, I s...
-
- This is cause from mbuf tag patch and for 2.0 this is fixed.
I will close it since it is not anymore relevant. -
- This is a tunable that can be recommended as a workaround or ship by default!
hw.igb.num_queues
02/09/2011
-
11:05 PM pfSense Packages Bug #1272 (Closed): AXFR Zone transfers not working in v2 Beta5
- This bug seems to have been previously cleared (refer bug issue 119) however as of 10 Feb, it's present when using pf...
-
- Applied in changeset commit:"1cbe86f032a6dc1480c5b62d1d9a641a29105bac".
-
- Please use the forum for support. This isn't a valid bug.
Our OpenVPN doesn't talk to LDAP directly, it uses a scr... -
- My VPN (openvpn + Ldap) still broken
I noticed you did not install the operating openvpn-auth-ldap ??? !!!!
I th... -
-
08:46 AM Bug #757: PPPoE Disconnect button with multiple PPPoE interfaces
- I am able to use the disconnect button to stop PPPOE sessions from the Interfaces screen. Thanks.
-
- Hi,
Small but annoying bug with the captive portal *widget*.
If I click on the "disconnect" button, the user is... -
- Okay, but passtos, was included in the pfsense configuration file client [pfSense-udp-1194-config.ovpn]
If I remov... -
- you can't use passtos with Windows hosts, not a bug.
02/08/2011
-
- I will close this if no more input comes.
This is only related to how if_bridge works, while it is questionable why ... -
- Applied in changeset commit:"36d6af4399089ea910befb6e5b29b894ae4c50cd".
-
-
- Applied in changeset commit:"9552450897319ab9e8810bd1a487d2936122c2d3".
-
- Committed thx.
-
- Very small bug, but, hey... we want a perfect system, aren't we ? :)
On the very first configuration (first boot o... -
-
- Applied in changeset commit:"c3606a3b47230707d1a793ead4837822a183d392".
-
- Committed thx.
-
- "Alternate Update URL" is not used on system information widget. The widget always use http://snapshot.pfsense...
... -
-
- Applied in changeset commit:"8f29b8923411e3d4a1cbec520c385c6dad91490a".
-
- Committed thx.
-
- httpsname is forgotten on the services/captiveportal config page.
Here is a patch... -
- Not sure if this will make 2.0 or not. It may have to wait for 2.1 at this point, it may end up a documented limitati...
-
01:49 PM Feature #1257: Handle encypted CA/Certificate private keys
- One more clarification...
I just checked and see that the private key is encrypted, so cert signing must fail since ... -
- When you imported the CA, did you import both the cert and private key of the CA?
All of the certificates are made... -
- Seems to be related to importing of a certificate authority.
To isolate a bit... I created an internal certificate... -
- This would make it easier to set up all certificates to expire on a specific day (thus simplifying the admin burden o...
-
- Im thinking of a UI that would allow checking off of all the certs to renew.
filtering by expiration date would ma... -
- would be handy to see when the certs will expire.
-
- ----------------------
Using My Cert My client
----------------
** Log in client
Tue Feb 08 11:56:58 2011 ... -
- It was just a misconfiguration.
-
05:11 AM Bug #1177: Passive FTP
- Been running recent builds on i386 and
no problems so far.
Thank You for your Work. -
12:28 AM Bug #1177: Passive FTP
- No problems for the last several builds. Thank you!
-
12:44 AM pfSense Packages Bug #1218: Freeradius package does not start when i do reboot
- I am running the FEB 7th Beta5 build. Free radius starts, and the services page confirms this. However, it seems that...
-
- fixed, thanks
02/07/2011
-
10:57 PM Todo #1262 (Resolved): Typo in ifup script
- /usr/local/sbin/ovpn-linkup
# write nameservers to file needs dns fidnings?!
... -
- We were really overthinking it, it can be as simple as forcing individual certificates to be created. It doesn't have...
-
- Ok, I understand but that's a bit pedantic as this is how it is in every other installation outside of pfSense. My vo...
-
- It's currently done that way because only with Local auth can you manage both the users and the certificates easily i...
-
- Currently in 2.0 BETA5, only the local user db is allowed for use in a Remote Access ( SSL/TLS + User Auth ) template...
-
- duplicate of #814
-
- The OpenVPN GUI permits the creation of multiple tunnels, but requires that each have a unique local port. As far as...
-
- works fine, post to the forum.
-
- Use Wizard in openvpn, and exported the OpenVPN Client
BUT
Open Vpn does not work
This OpenVPN Broken? ???? -
- Joe - the second issue you noticed requires DPD to function, see my post on the 2.0 board on the forum re: ipsec-tool...
-
01:35 PM Bug #1254: IPsec dynamic tunnels don't reload correctly
- If this is the same issue as the one discussed in the forum thread "VPN IPsec Remote gateway using DDNS doesn't updat...
-
10:59 AM Todo #595: Test IPsec with NAT
- Here my test case for qualifying pfSense for VPN and NAT.
Hope It'll help before pfSense 2.1.
(works great under Xe... -
09:32 AM pfSense Packages Feature #105: SquidGuard: Add progress bar for blacklist fetch with cancel/resume button
- > A progress bar for fetching the blacklist file is needed in the SquidGuard package.
Exists.
>I noticed that wh... -
- I can't replicate this - I can make certificates several different ways on current snapshots and they are complete in...
02/06/2011
-
- It's probably one that ermal fixed a few weeks ago. Several people hit it on the forums and they are no longer able t...
-
- I can't replicate this - anyone else?
-
- this seems to be fine.
-
04:27 PM Bug #1156: Upgrade from 1.2.3 to 2.0 with VMware tools installed will panic
- After upgrade, still panics and reboots.
-
02:23 PM Feature #1258 (Resolved): dyndns - DNS Made Easy
- I agree that the ability to customize dyndns from the GUI makes the most sense (http://redmine.pfsense.org/issues/124...
-
01:47 PM Bug #1251: /tmp/post_upgrade_command.php is not executing when going from 1.2.3 to 2.0
- After uppgrading to latest 404 error dissappears...
But the bug remains.. -
- the title of this bug should be "certificate file is not properly generated or saved." using internal cert auth
-
- upon further investigation, i see that the crt was not saved.
here's a bit of the config file.
... -
- when i export a certificate using
http://192.168.3.1/system_certmanager.php
i get an empty file.
the private ... -
- fixed, thanks
-
- When creating an Openvpn server instance, one or more entered ntp servers get rendered in the conf file missing the a...
-
- this has been a known issue for a while, and we have a solution with ipsec-tools 0.8.0 (not yet committed), just open...
-
- the original bug is fixed, and the later issue with non-0 exit status on racoonctl is fixed in ipsec-tools 0.8.0.
02/05/2011
-
- updated ticket to actual problem, it appears actually that there is no caching at all in gethostbyname, it issues a D...
-
01:25 PM Bug #1254: IPsec dynamic tunnels don't reload correctly
- Use this test program to compare:
#!/usr/local/bin/php
<?php
$dns_record = "www.pfsense.org";
echo "gethost... -
- We should test http://php.net/manual/en/function.dns-get-record.php vs gethostbyname
-
- /etc/rc.newipsecdns does not reload dynamic tunnels as it should.
-
07:30 PM Bug #942: dhcp relay breaks
- I'm seeing the same issue:...
-
- At this point I am not to keen on touching the BSDInstaller. We should set this ticket to future and deal with this...
-
- Marking as feedback, the recent package changes should have resolved this.
-
- This works ok marking as resolved.
-
- This should be resolved. I fixed the bug in the kernel upgrade code that was causing this.
-
-
04:27 AM Bug #1238: Dynamic DNS update with Freedns not working?
- Warren Baker wrote:
> Works for me - freedns works slightly different to the other 2 dyn providers you mentioned. Di...
02/04/2011
-
- Please post on the forum to ask questions of that nature, this is a bug tracking tool and not a general support system.
-
04:25 PM pfSense Packages Bug #1253: RRD Graphs dosen't work corect
- Ok, but If I can't see at the right moment what is the right speed of the transfer, how can I do that after 1 day? I ...
-
- That's just the effect of averaging the data out over longer periods. As the timespan of each graph gets larger, the ...
-
- Hello,
I'm with the last version of 2.0-BETA5 (i386)
built on Fri Feb 4 02:36:03 EST 2011
I have attached 6 pict... -
03:34 PM Bug #1252 (Resolved): bug in header.inc
- there is a coding error in /usr/local/www/header.inc that should be corrected.
Please see
http://forum.pfsense.o... -
09:26 AM Bug #373: Package Manager not available in menus
- I faced this issue too. It happens if you are running out of LiveCD. Install pfsense 2.0 to hard disk and then "Packa...
-
02:44 AM Bug #1177: Passive FTP
- With 2.0-BETA5 (amd64)built on Thu Feb 3 22:33:00 EST 2011, it's not resolved. The LIST command times out from FTP cl...
02/03/2011
-
-
- In 1.2.3 i had a addon named "OpenVPN Status" after upgrade under Status menu i had two "Open VPN"
both of them went... -
- Looks like this only got applied to NanoBSD and not the full installs. The installer isn't putting noatime,sync in fs...
-
-
- Found the remaining issue.
The previous, dhcp, interface type information was being lost when the apply changes butt... -
06:43 AM Bug #259: When disabling a dhcp interface, dhclient is not stopped
- Hi, in the 2011 02 02 snapshot the dhclient still isn't killed when switching to static from the console or UI.
Fe... -
- Should be resolved. Put it on feedback to wait for any last time problems.
-
- Mistake in the patch files.
In firewall_nat_out_edit.php, you should add after lin 223:
$natent['sourceportend'] ... -
- Several people on the forum who could reproduce this before are no longer losing their CA. Looks like it's fixed.
02/02/2011
-
04:01 AM Bug #1177: Passive FTP
- Yeah, this looks pretty good!
thnx
02/01/2011
-
11:05 PM Bug #636: layer7 not work correctly
- Any update?
-
- Just committed the final fix which should fix the issues and prevent hangs.
-
- driver issue we can't do anything about. Also referenced here.
http://forums.freebsd.org/showthread.php?t=2477&page... -
05:22 PM Bug #1249 (Rejected): Wireless Issue with bwn0
- [2.0-BETA5] Latest SNAP, ALIX Board with NANOBSD
Driver is detected. Go through and assign physical wireless card ... -
- If you have a CARP pair and unplug/kill LAN, the VIPs do not all fail over to the slave unit. Only the VIPs on the fa...
-
- Applied in changeset commit:"5289dc575b0ed5a8d3c1ca556442cf57525d3fb5".
-
- Jim P your fix makes the PPPoE tab appear, but the firewall rules are not generated after applying changes. I attache...
01/31/2011
-
- FreeBSD doesn't support 11n yet and there's nothing we can do to fix that. Should be supported in FreeBSD 9 reportedly.
-
12:21 PM Bug #1246 (Rejected): TP-LINK WN851N PCI (Atheros AR922X) 802.11n problem
- This card works fine only in 802.11b and 802.11g mode.
-
- Applied in changeset commit:"20fef17c7398170e18c9d03bcc04ee794002e981".
-
- After creating a PPPoE server a new tab should be displayed at Firewall Rules, but it isn't. Then I can't create rule...
-
11:46 AM pfSense Packages Bug #1245 (Closed): barnyard2 won't start
- barnyard2 configured with remote mysql server won't start.
I tried from command line and I receive:
@/usr/local/b... -
11:17 AM pfSense Packages Bug #1244 (Resolved): apache_mod_security_package missing mod_proxy.so (and perhaps others)
- and perhaps other files (mod_proxy*.so) on "2.0-BETA5 (amd64) built on Sun Jan 30 23:04:29 EST 2011"
"Jan 31 10:46... -
09:07 AM Bug #1238 (Feedback): Dynamic DNS update with Freedns not working?
- Works for me - freedns works slightly different to the other 2 dyn providers you mentioned. Did you follow http://for...
-
-
03:44 AM Bug #1242: Gateway in an other subnet on Wan
- search before write!
see ticket Bug #970,Bug #972
Gateways outside of the interface's IP subnet, on Ethernet link... -
- Hi
I tried to install the pfsense 2.0 with the following configuration:
Netopia router with PPPoE Ip Forward to... -
- Really ? On my side, it's still the same.. can't perform "LIST" command from WAN...
01/29/2011
-
- There have been a couple positive reports that some commits I made last week may have solved this. I'll leave it in '...
-
06:35 AM Feature #1241 (Resolved): Custom Dynamic DNS
- Because there are so many services which require an updated IP Address, which provide some kind of API via an HTTP re...
01/28/2011
-
- This is a duplicate of internal (private) ticket #1045 - it should be in 2.0, it just isn't there yet.
-
- It should not be possible to use aliases network "in Nat outbound? ?????
-
09:07 PM Bug #1239 (Resolved): PPTP - Assign password to a user with ñ
- Hi there,
VPN / PPTP / User, assign a password with an accent generated an error in the config file. pfSense resto... -
- This should be good in the latest snaps.
-
- Hello PFSense-Team,
I just tried to get a free-dns account to work. With dyndns and no-ip it is working but howeve... -
- I discovered another vector for loader.conf being emptied - it's included in the kernel archives (kernel_Dev.gz, kern...
01/27/2011
-
- bridge(4) before allowed gif(4) to be added as member with lower mtu.
This should be restored since naturally gif(4)... -
- Confirmed on forums http://forum.pfsense.org/index.php/topic,31906.0.html
-
03:59 PM pfSense Packages Bug #1236 (Closed): Anyterm package doesn't start after upgrade
- After an upgrade, Anyterm doesn't start automaticly.
Restarting the service won't work. I have to reinstall the pack... -
- This is fixed since we have people on forum complaining for the now missing nat.
-
- The problems should be fixed in latest snapshot that comes out.
-
- You can even update at the next snapshot that will come out.
It should fix the issues. -
09:46 AM Bug #1235 (Resolved): pfsense 2.0 load balancing with a https monitor seems to default timeout 200ms causing constant timeouts
- Hi,
I've been failing with load balancing between two https web servers on pfsense 2.0.
I have two https server... -
05:05 AM pfSense Packages Bug #1234: bge NIC not working
- Thank you Chris.
I will try replicate the error on a fresh BSD box. -
- we don't develop or control the drivers, there is apparently an issue with that particular chipset and FreeBSD 8.1, y...
-
- Hello,
I have a PFsense 2.0-BETA5 (amd64) built on Wed Jan 26 01:53:43 EST 2011 running on a HP hardware and none ...
01/26/2011
-
- Maybe (I think there is a really old ticket for that) but it was considered beyond the scope of what we wanted to do ...
-
07:37 PM Bug #1233: License Error for ipw_bss, ipw_ibss, wpi, ipw_monitor, etc.
- Wouldn't it be possible to present the user with the license file during install, then have a check box they explicit...
-
- Those have always been there.
It's an unfortunate requirement for certain Intel cards. If you have the card you ha... -
- While watching _2.0-BETA5 (i386) built on Wed Jan 26 10:45:46 EST 2011_ boot I noticed this. It can also be seen in d...
-
- For what it's worth, I just tried to change a user's password and received this:
_Fatal error: Call to undefined f... -
- Noticed a number of these while booting and on the console:
PHP Warning: PHP Startup: Unable to load dynamic libr... -
- We've been trying to track that down for a bit.
See this thread:
http://forum.pfsense.org/index.php/topic,32372.0... -
- Updated from a version of pfSense from early today to the latest version (2.0-BETA5 (i386) built on Wed Jan 26 10:45:...
-
- Duplicate of #1171
-
- When pfSense is switched from HTTPS to HTTP the certificate that had previously been selected for HTTPS is still list...
-
- Looks like FTP is working better with build from Tue Jan 25 06:07:53. Did not get a chance to really hammer on it. Th...
01/25/2011
-
- Something isn't quite right with textdump support. I can trigger the panic, I see the textdump script run, but saveco...
-
- dumpon/savecore are now run at boot on full installs (with swap space). Of course you'll need enough swap space to ho...
-
- Apologies. Please disregard my previous comment.
Wrongly perceived the issue to be that values entered manually in... -
- All that has been discussed at length (and not on an unrelated ticket), it was much easier to leave loader.conf.local...
-
- Thanks for the response Jim.
Since there's no man pages available in pfSense, my reference regarding the matter wa... -
- bug #560 isn't really relevant to this, you should store your personal customizations in loader.conf.local - that fil...
-
-
- Please test with the kernel located at http://files.pfsense.org/kernel.gz
Just copy it to /boot/kernel/kernel.gz and ... -
- Linked with #836
-
- The captive portal page has grown and grown and has a lot of features that most people will not be using.
In the s... -
- Please post in the forum for help in gathering more information. There are already several threads for similar issues...
-
08:17 AM Bug #1228 (Rejected): Autoreboot
- Hi! I've 2.0-BETA5 (i386)
built on Mon Jan 24 07:08:15 EST 2011 installed on a alix 2d3 and another installation on... -
08:26 AM Bug #729: if_bridge unpredictable filter interface selection
- Chris, was that in response to the issue I noted or the original one? I could understand the IP of the management int...
-
07:47 AM Bug #1226: Possible DOS in CARP synchronization
- I can reproduce it only using a "big" configuration file (~120 firewall rules + 10 interfaces) and with moderate HW p...
-
- I can't replicate this even clicking the force sync button as fast and as many times as I possibly can, it just works...
01/24/2011
-
- there was some breakage in bridging the past few days, fixed today. If you still have issues with a new snapshot plea...
-
07:09 PM Bug #1227 (Closed): Unifying multiple interfaces into bridge breaks connectivity
- I have following machine:
Dual-core Atom CPU @ 1.8 GHz
1 x 1GB RAM
2 GB Flash storage
1000/100/10 Ethernet adapte... -
- Apologies. Doesn't look like I set the target version of the bug correctly which means it doesn't show up in the cust...
-
- I will move this to 2.1 because the way we use/reload apinger there will not always be a time to show which is not ri...
-
-
- Applied in changeset commit:"a1d52f81879fc1f2253eeef5189adfa2e6396c11".
-
- it works exactly as it should per the man page, there are just certain ways you shouldn't configure it or you should ...
-
- I committed the driver from STABLE so it should be on new snapshots.
Please anybody with the issue test that snapshot. -
-
-
- UPD:
System can be only rebooted by issuing ssh [ip] reboot -q -
08:05 AM Feature #1225: static port range and outbound rules source port range (only to be tested and integrated, already coded)
- We use a sip server which handles both trunking and remote users. We typically use static port NAT for both functions...
-
- When a SIP peer starts the dialog, it sends thru SDP the port on which it is expecting the RTP stream.
There are of ... -
- yes, the same behaviour for me.
still getting a lot of timeout/reconnets.
on thre other hand it looks much better...
01/23/2011
-
- In addition to facility, everything comes through as "warning" currently where some logs should be marked as informat...
-
- I'm sure that that is a pretty real scenario, since that two or more admins can make some changes simultaneously.
... -
- You're hanging PHP by doing that, don't do that is the answer. Killing all php processes at the console or an existin...
-
- When you press "Force config sync" couple of times in a very short period of time (4\5 in a second) the slave machine...
-
- I've never seen RTP have to be static, though a worthwhile feature to have post-2.0.
-
- When you go to NAT Outbound, you can create rules to make 1 port static, or to force the source port (for example, fo...
-
02:41 PM Feature #1222: Support for tun or tap mode in openvpn server
- This is a patch that adds the option to choose tun or tap mode for server
-
- Updated to a more feasible solution, per-rule isn't easily possible with the way it works.
-
04:38 AM Feature #1223 (Closed): gateway group based sticky connections
- There are some circumstances, that global sticky connections option isn't the best case.
One of that is an internal ... -
- Renaming of Host-Alias, would be changed also in the Ruleset.
Renaming of Port-Alias, isn't seen in the Ruleset, per...
01/21/2011
-
- Updated to Fri Jan 21 06:52:27. Sorry, still no love. The number of tries before failure is inconsistent. After updat...
-
- There were some changes to the patches this afternoon. Grab the next snap that comes out (it's almost done building n...
-
- -loaded the developer's kernel -> solid, cannot duplicate the crashes-
Nope just takes more tries to bring it down.
... -
- Capability to change interface TAP or TUN for the server configuration in GUI.
-
- Some other possible fix pushed.
-
- Attaching log from start of test through end.
-
- Post your system log from the time of the reconnect, especially anything that mentions rc.newwanip and entries around...
-
- Updated to "Version 2.0-BETA5 (i386) built on Thu Jan 20 23:14:10 EST 2011", same behavior:
1. Unplug working br... -
- A patch to fix this issue has been committed.
-
- I'm creating this ticket in relation to the following forum topic since I don't think an bug was submitted by the OP:...
-
- On systems where we have a swap partition (read: full installs) we should setup the equivalent of the FreeBSD scripts...
-
- It would be better to ship some dtrace enabled kernel with images and create some scripts to easy reporting info and ...
01/20/2011
-
06:47 PM pfSense Packages Bug #1218 (Resolved): Freeradius package does not start when i do reboot
- first of all i am not debeloper , i am not sure if this place is the right way to post the bug
Every time i reboot ,... -
- In 2.1 or beyond it would be nice to have the OpenVPN local and remote network boxes instead be lists of networks, so...
-
- I'm seeing a slightly different behaviour which may be unique to having serial console enabled after a an update.
... -
- to clarify, that is the tun interfaces are included as "nat on ...", though possibly only where the tun interfaces ar...
-
- outbound NAT is applied on OpenVPN client interfaces when they are assigned, and should not be. Routing is almost alw...
-
-
01:22 PM Bug #1209: cannot restore encrypted configuration file
- confirmed, I can now restore my encrypted config backup. thank you!
-
01:18 PM Feature #1215 (Resolved): DHCP Bootp Flags
- Need support for DHCP Bootp flags on WAN interface. Specifically 0x8000 (Broadcast).
Some ISP's do not set dhcp s... -
01:11 PM Bug #1151: Outgoing pptp Traffic-Flow stops after a while
- pptp also working here :)
-
- The lockup issue is likely separate. The forum thread for that is here: http://forum.pfsense.org/index.php/topic,3245...
-
12:25 PM Bug #1151: Outgoing pptp Traffic-Flow stops after a while
- I updated on 1/19 as well and my PPTP VPN stability issue seemed to be resolved. But, as Chris stated above, I am ha...
-
08:26 AM Bug #1151: Outgoing pptp Traffic-Flow stops after a while
- Just updated to the latest versions the morning of 1/19 and in the afternoon, both versions introduced system lockups...
-
-
- Nevermind, I just realized that I can add multiple time ranges to the same schedule. See attached screenshot. My bad.
-
- I wanted to create a schedule for late night _plus_ wee hours of the morning. I entered a Start Time of 21 Hr 00 Min ...
-
11:34 AM pfSense Packages Bug #1213 (Resolved): Mod_Security+Apache+Proxy
- in general setting
"Bind to IP Address
This is the IP address the Proxy Server will listen on.
NOTE: Leave b... -
-
- The problem seems solved, i will continue
to test it at different times of day.
If i find further problems I will ... -
- This is not you hotline support.
Please use the forums for this issues. -
- After upgrading to yesterday mornings's build pfense locked up after a few hours. I then upgraded to the latest buil...
-
- was running the SMP kernel
loaded the developer's kernel -> solid, cannot duplicate the crashes
01/19/2011
-
- Same problems as I reported before using the i386 Wed Jan 19 11:47:04 build.
With testing tonight I was 3 for 3 on... -
- Also only able to retrieve the directory listing on the second try.
Response: 200 Switching to Binary mode.
Comma... -
- Testing with a client behind pfsense using Tue Jan 18 03:34:33. FTP helper takes down box when re-initializing a prev...
-
- after some heavy tests I found out that there are a lot of connections droped by the default deny rule!
This finally... -
12:37 AM Bug #1177: Passive FTP
- 2.0-BETA5 (i386)
built on Tue Jan 18 03:34:33 EST 2011
confirmed.. FTP helper is working..
-
- https://rcs.pfsense.org/projects/pfsense-tools/repos/mainline/commits/750951f9b2bd4cdb1bde4748cc51a0258b59f5b3
Fixes... -
- Committed a fix https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/c2461a56d45b678213488ea1ced099a38ead267e
-
- Create a limiter, add a delay, and save. Edit the limiter, erase the delay, and save. The value is still there, not b...
-
- Applied in changeset commit:"f5bafe95a1fb4372288816debaa21b4f943a32e8".
-
- https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/f5bafe95a1fb4372288816debaa21b4f943a32e8
Fixes the i... -
- I'm unable to restore an encrypted configuration file in the latest 2.0 snapshot. It fails with a "real" config back...
-
- Limiters should not be allowed to be specified on non-quick floating rules as they don't work in such a scenario.
-
- when a limiter is renamed it creates a new one rather than renaming it.
-
- thanks
-
- Hi, I upgraded to the Jan 17th firmware yesterday and I can confirm that this bug is fixed. Thanks!
-
-
-
- I just tested this with a clean 2.0 BETA5 i386 install and I still see dhclient messages in the system logs.
-
- There is some improvement, I can now use an ftp client on LAN in both passive or active mode, but still can't use pas...
-
- Out of the box, a single client instance will not fail from WAN1 to WAN2 when coming from pfSense itself. You can sel...
-
10:43 AM Bug #1206 (Rejected): OpenVPN client is not Multi-WAN capable
- After several day of trying every possible solution, I have to report that the built-in OpenVPN client is not multi-W...
-
10:50 AM Bug #463: PPTP VPN rediction does not work
- This still does not work in Beta5, I still had to make the rules by hand. The the option "Redirect incoming PPTP conn...
-
06:19 AM Feature #1205 (Closed): VPN: User-based / Group-based firewall rules
- Firewall rules on a per-user or per-group basis would be very helpfull.
This means we could limit acces to certain ... -
-
12:05 AM Bug #1130: NAT reflection broken...
- 2.0-BETA5 (i386)built on Tue Jan 18 02:47:41 EST 2011 everything works fine!
Problem seems to have been solved.
...
Also available in: Atom