Activity
From 07/04/2011 to 08/02/2011
08/02/2011
-
09:37 PM Bug #611: Firmware upgrade error: "There has been an error verifying the signature on this image."
- It's a refreshing issue. If you chenga the update url to something than change it back, it works.
-
- This problem occurs on pfSense 2 RC3. I have checked "Allow auto-update firmware images with a missing or invalid dig...
-
08:32 PM Bug #1629: invalid state table entries after WAN IP change
- I just copied the system log page and state table in attached document.
Would collecting the data with a syslog se... -
02:55 PM Bug #1696: Panic when finishing setup wizard with PPPoE WAN
- Does this happen on current snapshots? I can't reproduce this in a VM.
-
08:14 AM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- I also upgraded new snap today,but nothing changed.Ermal you can test yourself ipsec drop after pptp client disconnec...
-
03:48 AM Bug #1736 (Closed): Allow other users to be used as authenticator in xmlrpc exchanges
- Presently only admin user, hardcoded, can allow the sync of the user data through xmlrpc.
It would need to be done... -
12:11 AM Bug #1572: DHCP + MAC spoofing leads to link cycling
- I now wonder if it's also this:
http://forum.pfsense.org/index.php/topic,36643.0.html
if so, I can reproduce but al...
08/01/2011
-
02:44 PM Bug #1027: Config restore triggers HTTP_REFERER check on interface mismatch
- 2.0-RC3 (i386)
built on Sun Jul 31 05:05:32 EDT 2011
Same as Braden, changed interface, swap WAN and OPT1. Chang... -
03:02 AM Bug #1027: Config restore triggers HTTP_REFERER check on interface mismatch
- This is happening to me on 2.0 RC3, nanobsd, with a clean install.
Steps to reproduce:
changed interface defs via... -
02:19 PM Bug #1729: IMSpector-wip is missing some files for install
- Looks like the package build system got an updated MySQL port. Working on it now. Thanks!
-
-
02:11 PM Bug #1121: wireless interface antenna settings not applied at boot
- i never put anything manually coz i have no knowledge in freebsd etc, i dont even know where the config file is store...
-
- Nothing puts them in the config. You had to have done that manually.
-
- i removed that line and rebooted, so far the antenna settings r applied, let me test for further 24hrs and if its rem...
-
- For starters, in that config you have:...
-
- i just use one card at a time that too as a access point only and nothing fancy, i have tried clearing the config and...
-
- I am not sure what else might be relevant - If the code did not work, it would be broken for everyone, not just you.
... -
- what info can i provide for analysis coz i have 2 atheros cards and both the same, both different makes but same athe...
-
- There may be something specific to your card or config going on then, as no matter what I do, the settings always app...
-
- http://forum.pfsense.org/index.php/topic,32833.15.html
-
- Seems like you are using PRIQ as a discipline.
Can you please check that putting the bandwidth of the physical inter... -
01:59 AM pfSense Packages Bug #1735 (Resolved): Tinydns load balancing not working
-
01:58 AM pfSense Packages Bug #1735: Tinydns load balancing not working
- Verified. Thanks
-
- Merged in github, thanks, please verify.
07/31/2011
-
- When specifying extra IP addresses for failover and load balancing, failover works but load balancing doesnt.
Actu... -
02:20 PM Bug #1730: DHCP Failover
- Jim, thanks for the update. No one responded to my forum post and I must have missed the fix since build 2.0-RC3 Buil...
-
- Check your /tmp/rules.debug. We already have code in place to account for that....
-
- Running 2.0-RC3 Built On: Sun Jul 24 04:39:44 EDT 2011
I have discovered that I have to manually allow access to p... -
- I am using the AMD64 builds of pfSense 2.0 RC3. I have the same build running on dedicated hardware and in a VM with ...
-
- Please post on the forum to rule out configuration errors. I have just tested all that in a VM pair this week and it ...
-
- I am using the AMD64 builds of pfSense 2.0 RC3. I have the same build running on an dedicated hardware and in a VM wi...
-
- I am using the AMD64 builds of pfSense 2.0 RC3. I have the same build running on dedicated hardware and in a VM with ...
-
- i use the below command to check the applied settings
sysctl dev.ath
then i set them properly by using
sysctl de...
07/30/2011
-
12:17 PM Bug #708: Need more checks for dns rebind issue
- Chris Buechler wrote:
> That's impossible because 5 will never happen, browsers' internal DNS caches don't come anyw... -
08:25 AM Bug #1728: Shaper wizard not defining queues properly, doesn't shape manually by floating, ip or voip assignments
- Using the build 2.0-RC3 (i386)
built on Fri Jul 29 22:08:01 EDT 2011
Still seeing the same error messages. Have se...
07/29/2011
-
- Hafiz Rafiyev wrote:
> Ermal Luçi wrote:
> > I have put a fix in latest snapshots.
> >
> > @Hafiz Rafiyev,
> > ... -
- Ermal Luçi wrote:
> I have put a fix in latest snapshots.
>
> @Hafiz Rafiyev,
> i have put the fix on your box s... -
- ezshaper part of config.xml attached.
-
- The ezshaper part not the shaper part.
-
<shaper>
<queue>
<interface>wan</interface>
<name>wan</name>
<scheduler>CBQ</scheduler>
<bandwidth>2<...-
- Can you provide the ezshaper from config.xml that caused this?
-
- When running through the wizard for shaping, the following occurs when applying the configuration:
29 08:43:38 php... -
09:39 AM Bug #1729 (Resolved): IMSpector-wip is missing some files for install
- See below error while installing the package:
Downloading http://files.pfsense.org/packages/8/All/mysql-client-... -
- See here:
http://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards -
- hw.pci.enable_msix
-
08:56 AM Bug #1727: No default nor static routes after reboot.
- Sorry, I was migrating from smos ipv6 git and I was on an old update URL (http://snapshots.pfsense.org/FreeBSD_RELENG...
-
- Please use snapshots from upgrading since binary can change during commits.
go grab latest snapshot and use that to ... -
- After a gitsync and a reboot, i get no static nor default routes added on launch.
I got the error :... -
- for me i have set diversity off and tx/rx to 1 but after boot those values r all 0 and even after leaving it as it is...
-
- You should add a checkbox allowing to disable the "Autonomous address-configuration", setting the rtadvd option "pinf...
-
- On the DHCPv6 page, when you have a non-common bitmask, showed range is incorrect. Example:
Address ...
07/28/2011
-
- can't replicate with the latest version of Chrome on OS X, looks like problem with your Chrome (cache maybe, especial...
-
10:54 PM Bug #1724 (Closed): Adding new gateway throws JS error in Chrome
- I just did a clean install-to-disk of pfSense 2.0-RC3.
When I went to the WAN page.
I selected the "add" new gate... -
06:08 PM Bug #1425: pfSense stops receiving traffic on 'bge' driven interface
- Okay, fair enough. Can you please help me with the process of disabling 'msix'? I'm finding it difficult to discover ...
-
- The simplest way to do that is getting a FreeBSD 8.1 box and build the latest bge drivers from FreeBSD HEAD.
Then lo... -
- I have had TSO disabled since two weeks ago and have not experienced any crashes, but the systems could go literally ...
-
- I am removing dependency on 2.0 since this a driver/hw issue and out of our control.
-
- Presently there is no proper way to do it.
The solution is envolved and it will wait 2.1 -
-
- There has been merged a setting for allowing LDAP as backend to be configured.
Not sure it should be merged in 2.0. -
- Something must have corrupted (or failed to upgrade) your RRD files in the past. Or you had a backup of the bad files...
-
- Does it happen if resolv.conf has an entry
'options timeout:1'
'options attempts:1' -
-
- Can you post system log with state table as well?
-
- Applied in changeset commit:0124456b0c4d602adea538cee35fc67c977e9f2e.
-
- Applied in changeset commit:3e8fad13ae4a029fc6d872d87399f98f04a752cb.
-
- rc.stop_packages is currently disabled which is why reboots are still working now.
Since the upgrade to PHP 5.2.1... -
- More checks need to be added for the localip parameter of mpd based services when used as a concentrator since people...
-
- I have put a fix in latest snapshots.
@Hafiz Rafiyev,
i have put the fix on your box so you can test directly wit... -
- Chris Buechler wrote:
> someone who can replicate this and can get us access to their system, please email me (cmb a... -
- I have no problems with this that I can reproduce. I have about every combination of VIPs on interfaces and IP aliase...
-
- This works fine for me. Imaged a CF with 1.2.3 4GB, configured it, ran for a bit, then upgraded to a current 2.0 snap...
-
- It works for me with Ermal's patch directly applied. Once snapshots with this fix are uploaded, others can test.
-
- Can anyone reproduce this since #1438 has been fixed/closed?
-
- I can't reproduce this on current snapshots. If I set to Diversity=Off, And TX/RX for antenna 2, then it shows 2/2/0 ...
-
- yeah i think this is good
-
- I've installed/uninstalled quite a few packages and the only way I have managed to break the system is if I use pkg_d...
-
- I restored a config with vlans to a VM and it worked fine - I had to go to the VLANs tab and reparent the VLANs one b...
-
12:58 PM Bug #1722 (Closed): Associated filter rule retains original Interface option after copying a NAT rule
- I discovered a problem with the automatic filter rules created for NAT rules. When copying a NAT rule, the associate...
-
-
- both packages installed for me.. Thanks again!!
07/27/2011
-
- someone who can replicate this and can get us access to their system, please email me (cmb at pfsense dot org).
-
- That's impossible because 5 will never happen, browsers' internal DNS caches don't come anywhere near obeying short T...
-
- The checks won't protect against DNS rebind attacks that run like this:
1. browser makes DNS lookup for <hostname-of... -
-
09:26 PM Bug #1719: OpenVPN Status in Dashboard
- Looks good. Thanks.
-
-
05:49 AM
Bug #1703: editing/removing interface groups leaves remnant
- Looks good as of _2.0-RC3 (amd64) built on Tue Jul 26 19:09:40 EDT 2011_:
The group name is not removed in all ca... -
02:01 PM Bug #1721: uPnP issue with STATIC ip addresses
- Where do I find the logs or is it easier to find them via the file system?
-
- Seth Mos wrote:
> If I remember correctly the Xbox will not request uPNP mapping when the IP address is configured s... -
- pretty sure Seth's right from some quick searching.
-
05:16 AM Bug #1721: uPnP issue with STATIC ip addresses
- If I remember correctly the Xbox will not request uPNP mapping when the IP address is configured statically.
Try t... -
- Definitely easy to reproduce with the right conditions, mine panics thusly:
* Home router with IPv6 connectivity v... -
- Applied in changeset commit:2c466077934c3812aed9d15b77ab515e4b3e116d.
-
- Applied in changeset commit:4cf82d52943b00c2710b7867387230a0e58225be.
07/26/2011
-
- "No I'm rejecting it because it's a support request, not a bug report. If you want to dig into it and find the real c...
-
- It's still happening.
Again here's a relevant section. Our Asterisk server at 10.0.4.3 is still trying to use the o... -
05:33 PM Todo #1720 (Resolved): Relax input validation for PPTP Passwords
- Allow more characters for passwords as described at the forum:
http://forum.pfsense.org/index.php/topic,39003.0.html... -
- Applied in changeset commit:6b2dcac596477f7201a0c6b5734ab8f1b9a04c5e.
-
- Applied in changeset commit:6d0137065075d48498f28b6ef476858320a79c2f.
-
- If one of the defined OpenVPN servers has been marked as disabled, the OpenVPN status in the Dashboard produces the f...
-
04:58 PM Bug #1395: RRD data not collecting accurate information
- Oh I should have mentioned that my current build is a week or so old.
2.0-RC3 (i386) built on Fri Jul 15 05:55:15... -
- I need to open this one back up. :(
I'm not sure what build this behavior returned but I'm now seeing the traffic ... -
- i386 just uploaded, give it another shot.
-
- thanks Jim! Let me know when I should retest.
-
- Yeah there is still an issue, another (hopefully ok) set of packages has been building all day, should be done in a c...
-
- vnstat2 is able to install but it breaks my RRD graphs. un-install the package then a firmware update seems to fix it...
-
- You probably installed a package that overwrote rrdtool (like ntop). There is an issue with the uploaded package bina...
-
09:37 AM Bug #1718 (Closed): RRD Graphs error
- Unable to Show RRD Graphs, with a message to check System logs.
In the System logs, the following error:... -
- Looks like there was a slight mixup with the uploaded package binaries. New ones are building now, should be fine lat...
-
- After upgrade to 2.0-RC3 (i386) built on Sun Jul 24 19:17:15 EDT 2011, and installation of BandwidthD, the BandwidhtD...
-
- thanks
-
04:15 AM Bug #1715: NTP client is waiting endless during boot when NTP server is not responding
- I just tried to reproduce my scenario from yesterday. But got no way to force this issue again. I am sorry, please cl...
-
- stop opening bugs unless there actually is a specific bug detailed in the report. This is for confirmed, specific bug...
07/25/2011
-
- I have found this on the forums, and seems to be an unfixed issue. Please stop ignoring this.
Link: http://forum.p... -
- Me neither. There is a timeout, it continues to boot whether or not the NTP server is reachable and whether you even ...
-
08:34 PM Bug #1715: NTP client is waiting endless during boot when NTP server is not responding
- I can't reproduce. Yes ntpd hangs for a bit and them boot process continues.
-
- Starting pfSense hangs when NTP client is initializing. The NTP server outside is reachable, but cannot answer due to...
-
- Applied in changeset commit:073cd52e5836a961bcaf677d34b2252964fc9e10.
-
- Applied in changeset commit:85f9faa67f7eee5ca824c598b67927a1b71235f7.
-
- Ok solved. Check snapshots.
-
- Looks like the last package build didn't upload that file because another build cleared it out before it uploaded. I ...
-
- Port png-1.4.5_1 is missing. Packages ntop and vnstat2 won't install with this port.
Downloading http://files... -
- You must define a time server, as many operations on the firewall require correct time. You could enter an IP address...
-
- In the WebGUI under System->General Setup you can set the name(s) for NTP time servers. But you cannot clear this set...
-
05:16 AM pfSense Packages Bug #1244: apache_mod_security_package missing mod_proxy.so (and perhaps others)
- Had the same issue with a fresh AMD64 install.
Looking at http://files.pfsense.org/packages/amd64/8/All/apache-2.2... -
- "I believe this is a bug" isn't enough for a bug report, bug reports must have the specific bug. Please post to the f...
-
- Okay, I have tried everything, and beleive this is a bug. I have Upnp turned on and the xbox isn't able to open a por...
07/24/2011
-
-
- Rolled back changes as they were wrong (Thanks Ermal).
The problem does not exist in current snapshot, I was using o...
07/23/2011
-
10:48 PM Bug #1572: DHCP + MAC spoofing leads to link cycling
- Chris Buechler wrote:
> If MAC spoofing is enabled on an interface that is a DHCP client, in some circumstances it c... -
- Fixed in commit: f6d6c33
-
- Thu Jul 21 22:38:38 2011
NAS-IP-Address = 10.0.3.15
NAS-Identifier = "pfsense.localdomain"
User-Name = "test"
...
07/22/2011
-
06:07 PM
Bug #1703: editing/removing interface groups leaves remnant
- @ifconfig -g@ still shows the members.
-
- That is normal if it does not have the members.
-
05:19 PM
Bug #1703: editing/removing interface groups leaves remnant
- _2.0-RC3 (amd64) built on Fri Jul 22 11:43:53 EDT 2011_:
Renaming the group now works correctly. But deleting the ... -
- Applied in changeset commit:4869860590338234776737cf871e21d2e584f404.
-
- Applied in changeset commit:cdfd39e2b9df28910e4b339c9589ab5377a5933c.
-
- Should be fixed on latest snaps.
-
05:53 PM Bug #1709 (Closed): RRD failures for Traffic and Packets graphs on NanoBSD
- None of the Traffic and Packet graphs work on my ALIX systems. Here's a sample output for a failure:
php: /status_... -
04:55 PM Bug #1344: Replace prototype javascript code with jQuery
- Very nice select box http://harvesthq.github.com/chosen/
-
- It would be nice to import https://github.com/yahoo/l3dsr/tree/master/freebsd from direct server return.
Its BSD a... -
- Applied in changeset commit:17c98ba974bd48fd5b43d1ff4fd70ea50cf01b77.
-
- Applied in changeset commit:cec917b53a3921b5ce427045219240b71087103b.
-
12:29 PM Bug #1707 (Resolved): Pfsense 2.0 RC3 keeps route of deleted openvpn server
- I configured peer to peer SSL/TLS openvpn server and set the Remote Network to 192.168.4.0/24. Afterwards I changed i...
-
- Try with latest snaps.
It was only a cosmetic issue.
-
- I just committed an optimization that should address your concerns.
-
- Pleaase upgrade.
-
- This is in master https://github.com/bsdperimeter/pfsense/commit/51cd7a1e31fd5018aa465c0de66905e759f2e8cb
This is in... -
- Evgeny i do not see the commit anywhere?
-
-
04:23 AM Bug #1512: Ghost CAs
- Hi all,
I tested this today on my version on a ALIX Box:
2.0-RC3 (i386)
built on Wed Jul 20 19:51:58 EDT 2011
... -
- Just want to let you know that I use many pfSense 2.0-RC3 firewalls here for testing.
I use amd64 and i386 in XenSer... -
- that's only an issue in IPv6, 2.1.
-
12:43 AM Bug #1706 (Resolved): "Bypass firewall rules for traffic on the same interface" is broken
- Turning on the "Bypass firewall rules for traffic on the same interface" option will not generate the required firewa...
07/21/2011
-
11:57 PM Bug #1705 (Closed): Multi-WAN Failover loses default route
- Сonfigured Multi-WAN (Gateway groups: tier 1, tier 2, member down) and turned on "Allow default gateway switching" (S...
-
07:02 PM Bug #1692: OpenVPN Clients can't route to IPSEC peer
- Correct and helpful response. Thanks.
-
07:01 PM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- I've been watching/experiencing this bug for a while now and it's also now a stopper for us too. I'm also open to pa...
-
- Pablo - I emailed you.
-
- 2.0-RC3 on Soekris or Linux.
Traffic graph hangs web configurator with "cannot get data about interface"
Attemp... -
06:57 AM
Bug #1598: IP Alias VIP configured on a CARP VIP, resets CARP VIP on sync
- Andreas Bochem wrote:
> The issue on my machine is resolved in that version.
Addendum:
Not quite. The secondary ... -
05:20 AM
Bug #1598: IP Alias VIP configured on a CARP VIP, resets CARP VIP on sync
- Jim P wrote:
> That is not the most recent snapshot. See http://forum.pfsense.org/index.php/topic,38687.0.html
Th... -
05:52 AM
Bug #1703 (Resolved): editing/removing interface groups leaves remnant
- I noticed that removed interface groups are still shown by @pfctl -s Interfaces@ until I reboot the machine.
So I di... -
03:31 AM Feature #1701 (Closed): Vouchertime should be seperated
- The Vouchertime should be seperated, so the user can login today for 2 hours, logout (through logout-popup or idle-ti...
07/20/2011
-
- With IPv6 changes the CP now lighty of CP listens only on localhost which breaks CP.
No clear resolution or appare... -
05:48 PM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- Hi, Is there any estimated hours to resolve this issue, I'm willing to pay to resolve this issue since it's a stopper...
-
- Just added a "Pre-2.0 Upgrade Check" package for 1.2.x that will flag such things, though it can't be done automatica...
-
- Whoops, make that: http://doc.pfsense.org/index.php/Upgrade_Guide#International.2FSpecial_Characters_in_1.2.x_Configs
-
- Note added: (broken link)
-
- It's been mentioned in dozens of forum threads and on the mailing list, and elsewhere. I'm not sure if it's on the do...
-
- Could you at least added this to the "known problems" or the README file for the update.
It worked in 1.2.3 and will... -
- They were not supported in 1.2.3, count yourself lucky it didn't blow up on you earlier. This is a known issue, not m...
-
- Tested it with update from 1.2.3-RELEASE to both:
pfSense-Full-Update-2.0-RC3-i386-20110719-2331.tgz
pfSense-Full... -
- If umlaut like äöü are used in the description somewhere like FW-rules the update from 1.2.3-release to 2.0-RC3 hangs...
-
10:47 AM Bug #1698: IPSec tunnel from CARP backup interface
- Yes, there's no impact on the local systems, it's just a matter of bothering the remote system with continuous reques...
-
- this is generally a non-issue because nothing will try to bring up the connection unless it's failed over. But hopefu...
-
- Hello,
it happens this. When I create a IPSec tunnel I set as interface a CARP ip address in order to let the tun... -
04:29 AM Bug #636: layer7 not work correctly
- Is there any progress on this? I appreciate your hard work, Ermal.
-
- qLink will get all traffic that is not matched by the wizard rules.
-
- I have an interface group "WANs" containing two WANs, em1 and em2. This is correct. ...
07/19/2011
-
- Commit 51cd7a1e31fd5018aa465c0de66905e759f2e8cb
-
12:37 PM Bug #749: Downstream queues should not be assigned to LAN interfaces
- I tested out the shaper wizard without the p2p catch all, and it looks like the queues were created as intended.
q... -
12:36 PM Bug #1493: pf blocks all traffic following filter reload.
- I found the solution for my problem with broken states on filter reload:
I had to activate 'States' under @System ... -
- By going through the setup wizard and changing the WAN type to PPPoE, or just changing the PPPoE username and passwor...
07/18/2011
-
- Chris Buechler wrote:
> Needs to be fixed at some point, but if you end up with a loop like that you have something ... -
- Needs to be fixed at some point, but if you end up with a loop like that you have something configured in a non-optim...
-
- For 2.0-RC3 (i386) snapshot of Fri Jul 15 19:39:23 EDT 2011
The dynamic entries being written to /etc/hosts on a... -
- Presently, local services do not use the DNS forwarder (if enabled).
The solution (recommended by the dnsmasq manp... -
- Ermal Luçi wrote:
> Can you please be more clear?
> Exapnd what works and what not and possibly go first through th... -
- Can you please be more clear?
Exapnd what works and what not and possibly go first through the forums? -
01:45 PM Feature #1687: GetText code inspection
- We are reviewing the gettext code, strings with incorrect use of printf are already fixed. Soon they will be merged i...
-
- I tried to test this out, but the description that Ermal added doesn't clearly tell me what I'm looking for. At firs...
-
- I had it reset again this weekend which took the asterisk server down again. Unfortunately I wasn't near a computer ...
-
- Ross Williamson wrote:
> So I have no idea what is going on. This is on the latest snapshot which appears to be Jul ... -
04:55 AM Bug #1545: Dynamic DNS updates fail on 3G connections
- For whatever reason dynamic DNS has completely stopped working for me now. I can't even force an update. On first boo...
-
- Similar problem here:
Hardware: Fujitsu Primergy; VMWare VSphere
pfSense 2.0-RC3 (amd64)
built on Mon Jul 4 ... -
05:19 AM Bug #1493: pf blocks all traffic following filter reload.
- Hi,
I have tested with a vanilla install of pfSense.
I consistently encounter this issue. I have tried i386 pf... -
- that's a configuration issue, the PPTP clients are likely on the LAN subnet which means they fall into the P2, your O...
-
- Client PC connects using OpenVPN to a central pfsense firewall (2.0-RC3). Central firewall has IPSEC tunnel to remote...
07/17/2011
-
06:21 AM Bug #1691 (Closed): Virtio driver not working
- In commit:2ac109889ae1afeeea6cdd8dbcc339023a3f32a0 the virtio driver was added from upstream freebsd.
However, when ... -
- I have tried both with windows RADIUS and the packaged offered as an add-on for pfSense (freeradius) and both with th...
07/16/2011
-
08:53 PM Bug #1629: invalid state table entries after WAN IP change
- No, no, Im not talking about IPv6 in pfSense, Im talking about IPv6 NAT passthrough in the "System: Advanced: Network...
-
- IPv6 is a completely different version, that's 2.1 not 2.0, post info to the IPv6 board on the forum.
-
- I have the same problem (after the fixes) with IPv6 tunneling, so this is not resolved.
-
02:14 AM pfSense Packages Bug #1689 (Resolved): Home URL broken from package paths
- The pfsense image in the top left corner which takes the user back to the index.php page has it's url dynamically cre...
07/15/2011
-
- The DHCP server subnet input validation in 2.0 checks what IP is configured on the interface, so it's impossible to c...
-
05:13 PM Feature #1687: GetText code inspection
- <td colspan="2" class="listtopic">< ? php printf (gettext("Last $nentries PPP log entries"),$nentries); ? ></td>
-
- ver 2.0
Quickly i able to find it here
/diag_logs_ppp.php [91]
<td colspan="2" class="listtopic"><?php printf ... -
- Can you please point to such locations?
-
- In some cases, you can find such code:
$myname = 'NameName';
$myvar = 'abcd123';
$mytext = gettext("This is {$m... -
- guiconfig.inc
function print_info_box_np($msg, $name="apply",$value="Apply changes")
This function is called with... -
- This has been fixed for now by nullifying the gateway selection silently.
-
-
- Plese test latest snapshots.
-
- In the meantime you can get back in by resetting the LAN IP from the console, entering the same information again. Du...
-
03:48 PM Bug #1685: Web configurator silently fails when "Private key does not match the certificate public key"
- This is for version 2.0 RC3 x86.
-
- After choosing a particular certificate for the web administrator under System -> Advanced, the web server fails to r...
-
- This has been worked around by creating a queue that can go full interface speed.
-
- Can't reproduce this on current snapshots, full or nanobsd. Clearing logs returns fast and works as expected. Please ...
-
- So far the only way I've found to fix this is reboot. Restarting the web administrator from the console just printed ...
-
02:17 PM Bug #76: Changes needed to traffic shaper since its rewrite
- Sorry, I don't understand. Can't do what?
Isn't the error I am experiencing exactly same as #2 in the description o... -
- yes but that's no longer a bug, in this ticket that wasn't checked correctly, it is now. you can't do that.
-
- I am trying RC3 today and I still see the error with Single-WAN-Multi-LAN:
*"You cannot set the VoIP upload bandwi... -
- Just committed a fix for this.
You have to select the CA where you configure LDAP settings for it to be used.
This ... -
07:56 AM Feature #1683 (New): PF scrub min-ttl option
- Idea from this forum post http://forum.pfsense.org/index.php/topic,27206.0.html
It would be nice if pfsense have thi... -
- Idea from this forum post http://forum.pfsense.org/index.php/topic,36066.0.html
It would be nice if pfsense have thi... -
07:24 AM Bug #1545: Dynamic DNS updates fail on 3G connections
- i have the same issue, pfSense RC3 with two WAN.
Primary with lan connection to a router with fixed ip
Secondary PP... -
- i have to restart racoon service in order it works properly after pptp client disconnect.But i'm not sure this shutdo...
-
- I think that restart is user-triggered, people restart racoon to fix it. The log that looks interesting to me is:
... -
- Well i need the system logs since seems something is resetting ipsec daemon....
-
- tun IPs on OpenVPN connections fail the local IP check used for the HTTP_REFERER web interface protection, so the def...
-
- You would have to load puc manually as a module from loader.conf but the patch is imported now.
-
- Applied in changeset commit:b451691f08e5615158b04c767bc6c7cb876bc913.
-
- Applied in changeset commit:e6bd231242cb43ad7e8fca8635d6adcb17f38186.
-
- This should be fixed in latest snapshots.
-
- resolv.conf was populated in this case.
This instance was exacerbated by AutoConfigBackup so it was even worse th... -
- Can you check if /etc/resolv.conf has any entry during this time?
-
- still hit this and it creates major issues with trying to operate or troubleshoot the system when there's no Internet.
-
- Can you please try by disabling msix and tso on bge interfaces?
-
- There was a reason of removing automatic redirection.
Mostly was because of automatic posting that could break thing...
07/14/2011
-
- The one shot patch is not needed at all now.
You can just increase the sysctl sockmaxbuf to give the same results. -
- Please open a forum thread to discuss this and eliminate any possible configuration errors. IF a bug has been confirm...
-
12:23 PM Bug #1680 (Rejected): Automatic Nat inter IpAlias
- I believe this is a bug
PfSense doing this automatically Nat inter all IpAlias of a interface
In my setup I have
... -
- Note:
This fix keeps the redirect for non privileged users active.
-
- 1. Login and go to the captive portal status page (URL: http://your-pfsense-box.org/status_captiveportal.php)
2. Wai...
07/13/2011
-
- The problem here is that a generic way of implementing this is needed.
Some javascript tricks are needed which with ... -
- It appears just having an IPv6 gateway configured that's unreachable will result in panics several times a day, even ...
-
-
- Ermal great thanks for your fix,i had same problem(voip queue in ipsec vpn).After your last fix it's working just fin...
-
10:12 AM Bug #1344: Replace prototype javascript code with jQuery
- jQuery UI Core has a progress bar builtin:
http://jqueryui.com/demos/progressbar/
It is easy to control, is built... -
07:17 AM Bug #1344: Replace prototype javascript code with jQuery
- Progress bar replacement?
http://t.wits.sg/misc/jQueryProgressBar/demo.php for the demo
http://t.wits.sg/jquery... -
- it does work
-
07:30 AM Bug #1664: DHCP Server no longer allows empty gateway
- I have tested and can confirm the fix.
It's working as expected now.
// rancor
07/12/2011
-
- Need to change the Captive portal pop-up page to use techniques to bypass pop-up blockers.
-
04:17 PM Bug #1666: OpenVPN interface doesn't get added to bridge after reboot
- Tried the latest snapshot which contains this patch, but still doesn't get the OVPN interface added to the bridge aft...
-
- That is not the IP to listen for connections on, it is the IP to be used by connecting clients as their gateway on th...
-
12:43 PM Feature #1673 (Rejected): PPTP VPN Server Address by Interface Name
- Could the ability to type the interface name (eg WAN) in the server address instead of just the IP address be added. ...
-
- Andreas Bochem wrote:
> Same issue persisting on latest _2.0-RC3 (amd64) built on Mon Jul 4 16:49:48 EDT 2011_.
T... -
07:10 AM
Bug #1598: IP Alias VIP configured on a CARP VIP, resets CARP VIP on sync
- Same issue persisting on latest _2.0-RC3 (amd64) built on Mon Jul 4 16:49:48 EDT 2011_.
-
- What snapshot are you on?
There have been made some fixes lately to fix this can you please test?
By looking at the ...
07/11/2011
-
09:23 PM Bug #1627: VPN VOIP Traffic Ignoring Traffic Shaper Queues
- 2.0-RC2 (i386)
built on Fri Jun 10 21:40:17 EDT 2011
I added our config with ip's and keys changed, and a screen... -
- I got the update installed last week but haven't had the IP change on me yet (surprisingly). I'll update this once t...
-
- Have you tested this on 2.0?
-
- There may also be some routing concerns when used on a bridge. See QYX-233317.
-
- Ok good to know. I don't have a Mac to try it out on but I know some of my users have Macs at home so the support qu...
-
- The config archive works fine for Tunnelblick.
-
- I typo'ed the name of the client in the subject and don't have permissions to correct it. Could someone please corre...
-
- TunnelBrick is an opensource MacOSX OpenVPN client that seems to be pretty active. https://code.google.com/p/tunnelb...
-
- If you setup an L2TP server and try to connect to a CARP VIP on the same interface, it does not work. The server resp...
-
- Applied in changeset commit:5237d356f41b6ac44cabaaa17208795b8471abcd.
-
- Applied in changeset commit:bf17eb72c18ee9b751f9e3eb22a082fd9c273ac9.
-
- When using an interface assigned to an OpenVPN tap interface in a bridge, it won't be added correctly after rebooting...
-
- thanks
-
04:55 AM pfSense Packages Bug #1631: incorrect syntax of /boot/loader.conf after open-vm-tools package installed
- The same installation sequence now works fine. All OK.
07/10/2011
-
-
12:05 PM
Bug #1664: DHCP Server no longer allows empty gateway
- Applied in changeset commit:7988ce7581efee9aef0184edfb2eeb2f352477a8.
-
12:05 PM
Bug #1664 (Feedback): DHCP Server no longer allows empty gateway
- Applied in changeset commit:45d1024db3d3d32fb26f2b6c42460cbe98e24096.
-
- The default is to use the IP on this interface of the firewall as the gateway but if I leave this empty (default) it'...
-
-
- this is fixed now
-
- will this be fixed in 2.0?
-
- this is fixed now
-
- Need to add support for DHCPv6 relay. Can just copy DHCP Relay as DHCPv6 Relay, the existing dhcrelay supports IPv6 r...
-
- If a gateway is chosen for a DNS server on system.php, the gateway must be the same protocol as that of the DNS serve...
-
- system_routes_edit.php doesn't validate that the gateway selected is the same protocol as the entered "Destination ne...
-
- Members of a gateway group must all be of the same protocol, IPv4 or IPv6 only, not both. Currently you can create a ...
-
- Currently you can pick an IPv4 gateway for an IPv6 firewall rule, and an IPv6 gateway for an IPv4 firewall rule. Need...
07/09/2011
-
- Neat tool for generating network maps!?
http://jsplumb.org/jquery/anchorDemo.html
-
- Ermal Luçi wrote:
> Can you please post the system logs more complete not the ipsec related part?
Ermal,I special...
07/08/2011
-
- it has no input validation currently (partially because it can't check the subnet before the interface is configured)
-
08:50 PM Bug #1658 (Resolved): Adding new Gateway in interface page needs input validation
- When adding a new gateway in the interface page, it asks you to specify a "Gateway Name" for the interface; when subm...
-
-
- Running 2.0-RC3 (i386) Fri Jul 8 06:31:45 EDT 2001
I just tried adding a gateway that was outside the subnet I'm u... -
- this only applies when the tz is changed while the system is running, and has always been the case. I've always just ...
-
- During setup the timzeone is set correctly but some utilities in base do not honor it which creates some problems to ...
-
05:20 PM Bug #1598: IP Alias VIP configured on a CARP VIP, resets CARP VIP on sync
- For what it's worth, I have a pair of devices running 2.0-BETA5 (8.1-RELEASE-p2 #0: Tue Jan 25 20:12:38 EST 2011 ...
-
- The filesystem is mounted noatime, so even if it's left rw, it still isn't touched except when the system wants to wr...
-
- Using nanobsd i386 8.1-release-p4 Jul 8 06:31:18 EDT 2011, after resetting to system default and rebooting, the / mou...
-
- I now see bug #1279, which discusses the rw nanobsd mount issue.
Josh
-
- I'm not sure how to test this since in the latest snapshot the / mount is still set to rw by default. Erik, you ment...
-
- Running 2.0-RC3 (i386) Tur Jul 7 01:04:41 EDT 2011
The logout popup does work for me. I'm not using Radius or acc... -
- It would be useful in the future if Diag > States could kill states more selectively by port number instead of only b...
-
-
- Basically it checks for invalid combinations. I did not feel safe to call is_alias(something) without making sure 'so...
-
- Isnt this commit a bit drastic?
Possibly just check impossible combination should be enough? -
-
- changing the WAN IP and gateway works fine, whether in re-running the setup wizard or interfaces.php. Post to the lis...
-
04:27 AM Bug #1655 (Rejected): Change WAN address and their gateway
- When change the IP of the WAN and its gateway (the wizard proposes WANGW).
The gateway is not working properly, prob... -
- Can you please post the system logs more complete not the ipsec related part?
07/07/2011
-
- Ermal Luçi wrote:
> Can you please test latest snapshots and see if this happends again.
Ermal any changes with l... -
11:31 PM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- Just tested the latest snapshot 2.0-RC3 (amd64) built on Thu Jul 7 16:01:09 EDT 2011 - no change. All VPNs still dro...
-
- They're up now, the branch changed on the snapshots so the links were not pointing to the right place. Also, auto upd...
-
- Jim P wrote:
> That snapshot was not created after Ermal's note. Please wait for the next new snapshot. It should be... -
- Commit https://github.com/bsdperimeter/pfsense/commit/cfceda6d3528d4cdb87fccdb00f28ce194bf393f
-
- > A port alias can be assigned only as the "to" or "from" port, which is invalid and results in a pf syntax error.
... -
- That's expected to happen in 1.2.3 (it has no provisions for dealing with that scenario, only 2.0 does).
-
- Commit https://github.com/bsdperimeter/pfsense/commit/9bc59815c6eba7051a401404d4d0b0c7842a9d2f
-
- gitsync my pfsense and noticed miniupnpd.pid is now located in /var/run after reboot
thanks again guys! -
- thanks for the quick fix... I'll test once a new snapshot comes out
-
04:00 PM
Bug #1654: miniupnpd.pid located in wrong folder
- Applied in changeset commit:d8532e5db1abd2e4f6fd07998629936967fc9e67.
-
03:15 PM
Bug #1654 (Feedback): miniupnpd.pid located in wrong folder
- Applied in changeset commit:aa6798c07088b4a45f85e2626576e33876d04263.
-
- Running snapshot Thu Jun 30 17:12:48 EDT 2011 currently and also noticed it on Jul 4th snapshot.
miniupnpd.pid is ... -
- Lo Zio,
I like your suggestions, so I'm going to add my own wish list items for the CP here.
- Hide certain po... -
- I can confirm that this is fixed with the Jul 7 01:04:41 snapshot.
"ipfw table 1 entrystats 192.168.1.130" Now ret... -
08:48 AM Bug #1653: CP timeout bug: get_last_activity
- Also "Last activity" info from Captive portal status (/status_captiveportal.php?order=&showact=1) is wrong.
It shows... -
- I confirm this is the behaviour of my previus bug report (1647).
As per previous request, here is the log:
Jul 6 13... -
-
01:02 AM Bug #1607: MBUF usage grows geometrically
- After 10 days uptime my MBUF Usage has almost completely levelled off at 6062 /9856. The second number was at 9730 fo...
07/06/2011
-
- That snapshot was not created after Ermal's note. Please wait for the next new snapshot. It should be uploading soon.
-
- Ermal Luçi wrote:
> Can you please test latest snapshots and see if this happends again.
Just tested on 2.0-RC3 (... -
06:11 PM Feature #1260: Allow other Backends for Remote Access ( SSL/TLS + User Auth )
- Much appreciated!
Thanks -
- I changed the code around a while back to allow this, didn't realize there was still a ticket hanging out for it. Thi...
-
05:50 PM Bug #1549: Sip INVITE dropped.
- I was able to reproduce the issue again, but the problem only lasted ~5 minutes before resetting itself. I was unable...
-
-
- Well today it kills if the first ip, passed on first -b, matches src address or if the second ip, passed as second -b...
-
- Applied in changeset commit:8ed478973f20678568f03f00309a5165aa48a1b3.
-
- Applied in changeset commit:0f2826c03d3e3971f6d83041f9322737686846d9.
-
- This is probably broken in the case when the urltablealias contents change and pfSense reloads the alias but not its ...
-
- Fixed on next snapshots thanks for reporting.
-
- When I set idletimeout to blank the problem goes away.
When I set timeout to blank and idletimeout to 30, the prob... -
- Running 2.0-RC3(i386) Jul 4 17:29 Nanobsd.
Captive portal is expiring entries every cycle (60 seconds by default).... -
- Closing in favor of #1653 which has a lot more detail and appears to be the same issue.
-
- Please give the captiveportal log when this happens?
Also what is the idle timeout value you configure?
-
- Tried to unset the proxy transparent mode. Same thing.
Uninstalled squid, same thing.
It seems to log the user out ... -
- Have you tried this without squid installed? And this works normally without an idle timeout defined?
-
- using 2.0-RC3 (i386)
built on Mon Jul 4 16:48:37 EDT 2011
On captive portal, after setting a IDLE timeout (not t... -
- Applied in changeset commit:e366b753b24d8cadbe15bc6778e46c3159dc9983.
-
- 2.0 has Growl support already. Might be nice to use the jGrowl deal.
-
- Other Growl style notifications:
-----------------------
jGrowl
URL: http://stanlemon.net/projects/jgrowl.html
... -
- Also another notification bar called foobar http://themergency.com/foobar/ - which is pretty neat.
Then there is als... -
- Applied in changeset commit:00243d599dcb840eccf52f39f6d7da28d3605528.
-
- Applied in changeset commit:54dd98320d569f7f1c6041ec06dfe84c05948161.
-
- And the data sent to the RADIUS server is ok. It is an interface problem.
-
- Using 2.0-RC3 (i386)
built on Mon Jul 4 16:48:37 EDT 2011
Trying to set:
RADIUS NAS IP attribute
in captive po... -
- Confirmed, it does log the user out. Yet another reason not to use IE... :-)
-
- using 2.0-RC3 (i386)
built on Mon Jul 4 16:48:37 EDT 2011
Using IE9, clicking Status->Traffic graphs logs the u... -
- On 2.0 the rules do not have the opposing effect as they did on 1.2.3 when off-schedule. They merely act like they do...
-
07:59 AM Bug #1649 (Rejected): Schedule is blocking outside its range instead of passing the traffic
- I did some testing with schedules. For this created a schedule to block traffic between 00:00 and 06:00 every day.
B... -
- Using 2.0-RC3 (i386)
built on Mon Jul 4 16:48:37 EDT 2011
In Portal page contents:
- ability to revert to stan... -
- Removing squidguard version
Beta
1.4_2 pkg v.1.9
platform: 1.1
removes installed squid in an unclean manner.
... -
- I got the same error again with 2.0-RC3 (amd64) built on Fri Jun 24 19:26:29 EDT 2011.
Could not create a schedule... -
06:47 AM Bug #1445: Trouble with interface msk0 (Marvell Yukon 88E8057 Gigabit Ethernet)
- I have the problem too with the RC3 version of pfsense, according to
http://freebsd.1045724.n5.nabble.com/msk0-in...
07/05/2011
-
- PPPoE is supposed to clear all states on that interface when an IP changes, that's not happening correctly.
-
- Hopfully this is what you wanted.
My IP before the address changed was 76.254.18.100 and the new assigned addres... -
- 'pfctl -b' should selectively kill states for a single IP/gateway, but what it really does is wipe all states (or clo...
-
03:16 PM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- I can, on another system, had to remove the one failing from production. Should know something by tomorrow.
Th... -
- Can you please test latest snapshots and see if this happends again.
-
- Another alerting jQuery plugin: http://boedesign.com/demos/gritter/
-
- For log/state/etc... tables, I would highly recommend the DataTables jQuery plugin ( http://www.datatables.net ). I h...
-
- Possible on / off / service buttons: http://www.givainc.com/labs/ibutton_example.htm
-
- This will be a great alerts replacement: http://www.red-team-design.com/wp-content/uploads/2011/07/cool-notification-...
-
-
- Without a lot more detail this is impossible to track down. Please start a forum thread and see if anyone else has ha...
-
-
- Mukesh Patel wrote:
> its not a bug, please try with single or double coat i.e "mpatel" or 'mpatel'
Yes, the user...
07/04/2011
-
- not sure what you're referring to, deleting, adding, everything with config sync is working fine on the latest 2.0 ve...
-
04:38 PM Bug #1645 (Rejected): CARP sync problem for deleting process.
- Can not be sync to backup server for the virtual Ips, nat, load balancer and aliases record deleting process ın the c...
-
- Applies to: 2.0-RC3 (i396) built on Sun Jul 3 13:02:53 EDT 2011
Attempting to use the "easy rule" feature for Dest... -
05:52 AM pfSense Packages Bug #1640: Error to use squidguard with username
- its not a bug, please try with single or double coat i.e "mpatel" or 'mpatel'
-
- I'm not sure that's a bug, you should post to the forum for help.
-
12:21 AM pfSense Packages Bug #1640 (Closed): Error to use squidguard with username
- Hi,
I installed the squidguard module. In SERVICE -> PROXY FILTER -> GROUP ACL, I created an ACL and when I try to... -
- Evgeny Yurchenko wrote:
> No packet-dumps so far (details are on forum)?
I have been unable to catch the issue ag... -
- Latest version has the same problem.
Jul 4 02:15:14 ipfw-classifyd: Loaded Protocol: citrix (rule altq)
Jul 4 02... -
- I am sorry, did not pay attention to target version, just felt that it was doable.
-
- Evgeny - this is ok but in the future please don't commit anything with a target 2.1 to 2.0.
-
- OK, 3 Jul snapshot managed to keep the interface up over an IP change. Still not updating dynamic DNS:
Jul 4 16:3... -
- The DHCP server screen allows any IP as the gateway IP, needs input validation there to ensure only IPs within that s...
Also available in: Atom