Activity
From 08/02/2011 to 08/31/2011
08/31/2011
-
05:12 PM Bug #1666 (Resolved): OpenVPN interface doesn't get added to bridge after reboot
- thanks
-
01:40 PM Bug #1666: OpenVPN interface doesn't get added to bridge after reboot
- Seems to be fixed with latest snapshot, thanks.
-
02:47 PM pfSense Packages Bug #1822: Snort won't start
- This is for snort-dev from what i can see!?
-
11:57 AM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- Also looking for a progress/status report here. Thanks.
08/30/2011
-
- The rules such as: ...
-
- HAve you tested with latest snapshots?
-
- Can you please try latest snapshots?
Also if still seeing issues can you get packet traces and any logs from pfSense... -
- Applied in changeset commit:db74464bf6f980c5c5845d53624d4c6f1b139fa7.
-
10:48 AM Bug #1696: Panic when finishing setup wizard with PPPoE WAN
- I was finally able to reproduce this in a VM, even when the WAN was initially set for DHCP. Same panic message/backtr...
-
- Can you please test with tomorrows snapshot?
-
06:21 AM Bug #337: sticky connections do not work
I'm having the exact same behaviour as described by Mark Huijgen earlier. The only difference is that my two WAN in...-
07:44 AM Bug #1344: Replace prototype javascript code with jQuery
- Bootstrap, a nice framework from Twitter which has a number of some quite nice features http://twitter.github.com/boo...
-
07:22 AM pfSense Packages Bug #1822 (Closed): Snort won't start
- So many issues with this package.
1) Local rules get wiped every time the auto updater runs. Then we have to go t... -
07:16 AM Bug #1806: OpenVPN Tunnel Network label configuration creates a wrong configuration file when using TAP device mode
- Did it with success, but with a little modification about the netmask. In fact to make it work I had to use the $mask...
-
- STP options work fine, not enough here to do anything with. Please post to the forum or mailing list with information.
-
04:12 AM pfSense Packages Bug #1821 (Rejected): spanning tree options
- Spanning Tree options are not considered
08/29/2011
-
11:58 PM Bug #1819: DNS Resolver Not Registering DHCP Server Specified Domain Name
- Yup, I hear ya.
Maybe by 2.1 someone could figure out how to do the dynamic hosts part per interface also, instead... -
- thanks. Too close to release to fix something that hasn't ever worked (probability of unintended consequences is alwa...
-
- Attached patch should result in the following behavior for registering DHCP hosts in DNS Forwarder.
*+Statically A... -
- Maybe just a tad bit of logic for using system domain when not specified in dhcp interface....
-
- Could fix for the statically assigned hosts of each interface in services dhcp be as simple as this?
--- /etc/in... -
- That's always worked that way, the domain filled in for the DHCP server if different from the primary domain name of ...
-
- Can you please bring some examples and facts from pfSense config files?
-
- DHCP Server specified Domain Name not being registered in DNS Forwarder.
Hosts are resolvable by System General sp... -
-
07:17 AM Bug #1809: Growl issue
- Well oke, thats now...
Never noticed that in RC1, But yes, it's working now :)
Thanks. -
04:02 PM pfSense Packages Bug #1820 (Closed): widescreen package doens't show ipv6 link
- widescreen package doens't show ipv6 link
dhcpv6 server & dhcpv6 lease link are missing when widescreen package is... -
-
- Can you try this?...
-
- Applied in changeset commit:737dbc05c13ddf31dc238ac59b406cc62716482a.
-
- Applied in changeset commit:8614f335d1c9d62cdb65e41f235e123e6993368e.
-
- Please try again newest snapshots
-
- DHCP Server specified Domain Name not being registered in DNS Forwarder.
Hosts are resolvable by System General sp... -
10:37 AM Feature #1817 (Resolved): Expand easyrule functions
- It would be nice if we could also use subnets for wan and lan interfaces and use the gateways thru the easyrule cli.
... -
08:19 AM Feature #177 (Feedback): IPv6 support
- Most of the basic system now works with IPv6.
Large things that don't work.
- PPTP Client. not checked into. Is that... -
- This code is already checked in and the client exporter supports the new options as well. Furthermore the client expo...
-
- Negative, some networks will remain is bogon networks regardless, if networks are returned to a RIR they might come b...
-
- Please test
-
- Added Love, please check
08/28/2011
-
-
12:12 AM pfSense Packages Bug #1770: Can not install package Country Block
- Fixed in version 2.2
-
- thanks
-
- Fixed in version 2.2
08/27/2011
-
- diag_states_summary.php doesn't work correctly with IPv6. Seems to group everything under one entry, just listing the...
-
- should be fixed by https://github.com/bsdperimeter/pfsense-packages/pull/45
-
04:30 PM Feature #687: Test Button for Growl Notifications
- Chris Buechler wrote:
> You can file a test notice by going to Diag>Command, in PHP box put in:
> file_notice("tes... -
07:57 AM pfSense Packages Bug #1753: Spoink integration
- 2.0-RC3 (amd64)
built on Wed Aug 24 10:10:33 EDT 2011
same case of hamilton, the error message is displayed onl... -
04:45 AM pfSense Packages Feature #1815 (Closed): OpenVPN Client Export Additional Parameters
- Hi,
The openvpn client configuration exporter doesn't have an option to pass additional parameters to the client (... -
- New version for auth.inc and system_authservers.php to allow for an extended LDAP query (Groups or otherwise)
08/26/2011
-
- i just uninstalled the widescreen package, shortcut are back. There is something missing for 2.1 in the widescreen pa...
-
- i found that right after an upgrade goth links are there. The links dissapear after all the package upgrade.
i hav... -
- I can not replicate this anymore as I only have a single WAN left at work.
08/25/2011
-
- We have no current plans for implementing this. where "current plans" always means "someone willing to fund it" out o...
-
04:17 AM Feature #1701: Vouchertime should be seperated
- No intressst in this?
-
- I'm also unable to replicate this.
-
- I switch one of my tunnels back and forth regularly between my two WANs and as long as I adjust the peer address on t...
-
- You have a dying hard drive or other fatal hardware quirk. Nothing we can do about that.
-
05:55 PM Bug #1814 (Rejected): Drive read/boot errors w/2.0 RC3
- From forum post: http://forum.pfsense.org/index.php/topic,39181.0.html which was submitted by palesius
I have a sy... -
- I've been able to create a new gen_subnetv6_max() function in about a hour or 2 of coding and testing. Should be reso...
08/24/2011
-
- Should be all set, there was a unset of the input errors halfway the input validation that must have broken a lot of ...
-
- Committed code in git that should fix most of this, shows only the correct address family when editing a pool or fire...
-
- I've committed code to the gateway groups page that prevents you from adding different address families in the same g...
-
- Confirmed that my Macbook with 10.5 only has a link-local address when set to router-only. you can Still enable DHCP6...
-
- How are you testing Growl to say it is not working?
Growl creates a temp file (/var/db/growlnotices_lastmsg.txt) of... -
- This affects the kernel in 2.0 which is currently also in use on 2.1
-
- Code committed that prevents address family mixups in gateways and monitors, prevent v6 gateways on v4 only interfaces.
-
- Code with address family validation checked in, please test.
-
- Code checked in that converts the interface names to gateway names, updated the system.inc code that updates the rout...
-
03:47 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- ronald meulendijks wrote:
> 0.0.0.0/0[any] 192.168.78.1[any] 255
> out ipsec
> esp/tunnel/95.96.134.40-91.189.22... -
- Jim P wrote:
> Some people are still hitting this same error, but not this specific circumstance. Two support custom... -
- My situation maybe related to this issues.
Mobile clients connect to pfSense use nat-t. I think racoon should supp... -
03:45 AM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- Is there any progress on this issue?
-
- Seems fair enough
-
- Caution, if the config is Upgraded on nanobsd platforms the converted RRD files are not immediately saved to the flas...
08/22/2011
-
- floating rules can work around this
-
- the 'pass out' rules such as:
pass out route-to ( em1 9.2.2.1 ) from 9.2.3.17 to !9.2.2.0/21 keep state allow-opt... -
11:07 AM Bug #781: Entering sim code problem on a Huawei E1752
- Having same problem here with a novatel eu850d minipcie card, although PIN is deactivated.
When removing the "GetOK ...
08/21/2011
-
- has to be a browser cache issue, they're there.
-
- The dhcpv6 & dhcpv6 shortcut isn't present in the menu. but i have access if I type manualy the link in the address bar.
-
06:28 PM Feature #1811 (Closed): Monitor PPP for connections stuck in "initial" state
- I've been trying to help debug an issue with dynamic DNS updates on 3G connections (1545) but keep getting hampered b...
-
- DHCP Relay page only has 4 fields which are all the same between v4 and v6 with the exception of input validation. I ...
-
- I'll Investigate the needs. Page probably needs a total makeover because next to nothing that exists in ipv4 can be p...
-
- Added a "router" type that sends pinfoflags as being "". From the confusing documentation this might need to be "l" w...
-
- My thought was to add this as a choice from the drop down on the DHCP server page.
The config code currently does ... -
- Committed patches for both rebind and referrer checks.
Added patch for redirect url. -
- Confirmed that without a alternate port you do in fact trigger a DNS rebinding attack.
Found another gem related to ... -
- Will fix, same javascript helper from firewall rules and DNS server settings (gateway) would apply.
-
- This same issue exists on the firewall rules (edit) page for selection of gateways.
I can fix the input validation... -
- the sbappendaddr_locked() is a function that I believe comes from our one shot dumps patch which is active for our 2....
-
- Resolved by a commit a week ago when I ran into this myself on my lab setup.
-
- The function that calculates this is currently a string operated function instead of proper math. We need to have thi...
08/20/2011
-
10:22 PM pfSense Packages Todo #596: Varnish package suggestions for VCL syntax checking
- follow this forum topic:
http://forum.pfsense.org/index.php/topic,38271.15.html -
- > I work in a web shop design company and we use varnish as a reverse proxy for mostly sites builded using Drupal, Co...
-
- duplicate of #1810
-
07:52 AM pfSense Packages Bug #1805: Captive portal - Portal page contents - View current page url is incorrect.
- to be more specific: select line 700 - 710 and replace by:...
-
- In the /usr/local/www/services_captiveportal.php file the link to the uploaded html can not be accessed from a networ...
-
- I reported Bug #1769 that Growl stopped working and it got rejected.
So I tried some other stuff and updated the bug... -
- fixed, thanks
-
12:49 AM Bug #1808 (Resolved): link to scrub info is dead
- There is a link in the "Disable Firewall Scrub" section of /system_advanced_firewall.php that points to http://www.op...
08/19/2011
-
04:48 PM Feature #1807 (Resolved): Button needed for '-add a new one-' on the static IP configuration
- Button needed for '-add a new one-' on the static IP configuration. Currently this is just a link and not entirely o...
-
10:59 AM Bug #1344: Replace prototype javascript code with jQuery
- Nice javascript spinner http://fgnass.github.com/spin.js/
-
- Those lines are from the OpenVPN log
/sbin/ifconfig ovpns2 3.3.3.5 *netmask 3.3.3.6* mtu 1500 up
/usr/local/sbin/... -
- When creating a *layer 2 tunnel using TAP devices in peer-to-peer shared key mode* you get a warning in the OpenVPN l...
-
- In the http://pfsense.local/services_captiveportal.php file there is an incorrect part:
the lines 701 till 709 nee... -
- Please post in the forum to rule out a configuration issue and to gather more information. If it's determined that a ...
-
05:02 AM Bug #1804 (Rejected): DNS forwarder
- I am on latest RC3 - I just discovered DNS forward is completely non-functional.
I am using 2 WAN (WAN+Opt2)- balanc...
08/18/2011
-
- It ends up read only but it breaks many other things if you upgrade with packages. GUI doesn't load, many processes d...
-
- Yeah, unfortunately that is the case, axe(4) doesn't support altq. Was worth double checking though.
-
09:52 AM Bug #1802: Interface not showing in traffic shaper
- From the dmesg output I get, the NIC is using the Axe driver. So, no ALTQ support.
axe0: <vendor 0x0b95 product 0x... -
- They all call themselves ue0 now I see. If you look in dmesg there would be a line saying what driver it actually is....
-
- It use the "ue", which is not listed in the ALTQ supported driver list.
-
- What driver does the network card use? It would be something like aue0, etc. We can double check the driver to see if...
-
- After doing more research, it seem like not all drivers/network cards are supporting ALTQ, so that must be the issue....
-
- Hi,
I recently installed pfSense 2.0 and am using an USB network card for testing purpose. I noticed that the inte...
08/17/2011
-
-
- Hello, it would be great to have a box in the certificate creation page to include intermediate certs.
forum threa... -
- See also #1336
-
- I put a fix that helps this.
Can you please try with latest snapshots? -
- That's just a fact of how it works, not a bug. If you have access to the user manager you have full admin rights.
-
03:08 PM Feature #1787: Everyone with access to user manager has full admin rights
- There are only a few things I have changed. I think this problem is not dependend on the configuration. To test this ...
-
- Can you describe how you have setup your firewall that gives you this issue?
-
- In some scenarios, it's undesirable for user manager users to have full admin capabilities, such as managing CP users...
-
- This is not expected to work on 2.0.
The way you should do is assign the vlan and then go and create a PPP type li... -
03:10 PM pfSense Packages Bug #1590: Snort Will Not Start
- amd64
pfsense rc3
Snort
Notes:
Snort seems to be still down
alerts tab clear log seems to be broken -
01:07 AM pfSense Packages Bug #1590: Snort Will Not Start
- the only snag that I think *might* cause an issue is a future rules update since that flushes the rules folder. if l...
-
- Another update. Just tried rebooting the server -- no updates were done or any changes to configuration or addition/...
-
- That may be possible, it would have to be tested to make sure it really works though. I haven't looked at this since ...
-
11:33 AM Feature #1184: Certificate Manager - Ability to add nsCertType=SERVER extension to certificates
- Since we know in advance what kinds of extensions we want, they should all be specified in the openssl.cnf, but in di...
-
- Auto upgrade works fine, I just tested it on my alix again. You may have a problem specific to your system or CF. Ple...
-
10:09 AM Bug #1786 (Rejected): NanoBSD auto upgrade fails
- I installed
2.0-RC3 (i386) built on Tue Aug 16 20:24:26 EDT 2011
on a Netgate ALIX.2D3 / 2D13.
by dd the image...
08/16/2011
-
- I used the above command, which fixed that issue. However, after turning on some more Snort rules categories, when I...
-
03:37 PM pfSense Packages Bug #1768: DNS Forwarder of Tinydns
- Any news on this?
I would really like to patch the stuff and make it work. All I'm waiting for is some response on... -
08:58 AM Bug #636: layer7 not work correctly
- Hi all,
I tried with version:
2.0-RC1-IPv6 (amd64)
built on Mon Aug 15 22:32:41 EDT 2011
This seems definitely... -
- After going through the Set IP address at the console and configuring an interface for DHCP, the displayed URL is wro...
-
- When having localhost as a first server in resolv.conf, as is done on latest snapshots, this bug does not manifest.
... -
- Hi all,
I just tested successfull with the following snapshot:
2.0-RC3 (amd64)
built on Mon Aug 15 22:32:41 EDT ...
08/15/2011
-
- Applied in changeset commit:24a682d3b646b61f9f3fdf787113b3861bb3be09.
-
- Applied in changeset commit:7a787c581eb272e7dba5fe83994e129db06bfb2c.
-
- From the attached:
- What is the old gateway?
- What is the new gateway?
- What is the wrong entry?
-
- Reverted the changes.
-
- The GUI always binds to 443 on all interfaces. The fact that it works at all in that configuration is surprising. As ...
-
- Hi,
if a pppoe interface is used as wan interface and OpenVPN is attached to the wan interface on port 443/tcp (wh... -
- Well yes and no :)
I reinstalled the system (2.0 RC1) and it worked, I updated to 2.0 RC3 and it still worked, tha... -
- make sure you post this in the country block thread on the forum, the maintainer of that package doesn't watch ticket...
-
05:49 AM pfSense Packages Bug #1770 (Resolved): Can not install package Country Block
- Can not install package Country Block....
08/14/2011
-
- This issue is back again in RC3. I found the following fix in the forums:
http://forum.pfsense.org/index.php?topi... -
- works fine on that snapshot.
-
- I just noticed that Grow will not display a message but only registrar itself.
To be sure it's not Lion I tried to s... -
07:18 PM Bug #1425: pfSense stops receiving traffic on 'bge' driven interface
- Also, just as an aside, I was unable to trigger the issue using generated traffic from iperf. I tried to generate bot...
-
- Disabling msix on our system caused serious problems (we also have igb Intel Pro cards in these systems which I suspe...
-
05:14 PM pfSense Packages Bug #1218: Freeradius package does not start when i do reboot
- This bug is stila actual on RC-3.
The webGUI shows freeRADIUS running but clients cannot authenticate anymore. This ... -
- Dynamic DNS does not update without manual intervention on Aug 12 build
08/13/2011
-
- confirmed fixed
-
- Serge: can you confirm this fix please?
-
-
-
- I haven't seen any package reinstall issues in general of late, sounds like this one may be something specific to tha...
-
-
- this is the same as #1107, closing in favor of that one.
-
- Aaron - is this fixed?
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Yehuda - is this fixed?
-
-
-
-
-
-
-
-
-
- no one else is seeing this
-
-
- I can still replicate this. If the WAN is set to PPPoE and you run through the setup wizard leaving the same settings...
-
- This needs to be backed out and moved to target 2.1 for fixing, putting URL table aliases within network aliases resu...
-
- Hello,
just playing around with the TinyDNS package on pfs and found some "issues":
As far as I got it, the ide... -
-
08/11/2011
-
- Well making p2pcatch all only valid for Wan->Lan traffic is not easily possbile today.
It certainly would be possibl... -
- Applied in changeset commit:401869ec326193cac13fbe4b6e2c8c879039445a.
-
- Applied in changeset commit:f61dc8e6d638949866fdcb61c05c9d5905a48a80.
-
- If the user has either the Login/Logout, or the new Dashboard privilege, those now get sorted first in the list when ...
-
-
05:54 AM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- please change status to new,because it's unresolved
-
- This should be worked around for now on 2.0/2.1 but if there is a more elegant long-term solution for 2.1 that would ...
-
10:40 AM Bug #1767: Unable to modify pppoe interface which is linked to a vlan via WebGUI
- Hi Oliver,
from the view of the WAN interface sis0_vlan7 is a network port and the name of this network port was c... -
- Hi,
IMHO it's not a real bug - it's just the way it's configured. You create a VLAN and then you assign the VLAN i... -
- No, I mean the squid3 package has been broken in some fashion the majority of the time, and when it works, you're luc...
-
03:47 AM pfSense Packages Bug #1764: Wrong version of squid3 among the packages for pfSense 1.2.3
- Fulvio Scapin wrote:
> Jim P wrote:
> > Squid 3 is not and has never been recommended for general use. It's experim... -
- Jim P wrote:
> Squid 3 is not and has never been recommended for general use. It's experimental at best. Please use ...
08/10/2011
-
- Yup. Works. Thanks.
-
-
05:18 PM Bug #1759: PPPoE not working
- Hi,
I've just updated to the latest snapsphot version "Wed Aug 10 12:23:51 EDT 2011" (*pfSense-Full-Update-2.0-RC3... -
06:06 PM Bug #749: Downstream queues should not be assigned to LAN interfaces
- It seems to me that you are saying that p2p catch all and not shaping Lan to Lan traffic are mutually exclusive then....
-
- Probably yes.
But that is what it does if you select it.
Meaning that qP2P will become default queue if you enable... -
- Applied in changeset commit:e59953342fc399c119766363a3815f7335b07951.
-
02:51 AM pfSense Packages Bug #1766 (Resolved): Minor bug - siproxd prints out error message when siproxd_generate_rules called with "pfearly"
- I have pfSense 2.0 with siproxd and noticed the following in the system log when siproxd start up is processed:
<p... -
- Not that it matters to the real bug here, but "configure a null service name" is now the default behavior if the serv...
-
- In Germany our VDSL provider (T-Com) is using VLAN id 7 for connecting to the internet. So I created VLAN 7 with pare...
-
04:57 AM Bug #1705: Multi-WAN Failover loses default route
- Chris - Thanks for letting me know. I have been looking through the forums, but nothing there works for me for some ...
-
02:58 AM Bug #1744: Upgrading
- Package not found error still present with today's (built on Tue Aug 9 15:52:55 EDT 2011) build.
Upgrade was faster,... -
08/09/2011
-
- Testing 2.0-RC3 I386 Built on Mon Aug 8 19:26:45 EDT 2011 nanobsd 2g
The logic to not show the default queue check... -
- this isn't the place to ask questions, please post to the forum or mailing list.
-
12:55 PM Bug #1636: outbound state timeout control not possible?
- I too agree with Adam. I have this problem all the time with my SIP connection. It keeps dropping. Have not timed it ...
-
12:51 PM pfSense Packages Bug #1765 (Resolved): Unable able to clear Snort Alerts
- Unable to clear the Snort Alert log. After clicking on Clear and Ok, you are brought to a blank page. Going back to t...
-
- https://github.com/bsdperimeter/pfsense/commit/8fd84f8778dde3f1c62934c1c2ae687bc5c0f51f
Testing the changes made i... -
- Squid 3 is not and has never been recommended for general use. It's experimental at best. Please use squid 2.9.x if y...
-
- Same issue resolved with this commit:
http://redmine.pfsense.org/projects/pfsense-packages/repository/revisions/3bd2... -
08:58 AM
Bug #1745: various Kernel panics with 2 identical NICs
- Sorry for posting in the wrong place. And thanks for providing the pointer to more info!
-
- Switching this back to New since the patch had to be backed out for now - it appears to have been negatively impactin...
-
- Mike - what you're describing is the correct default behavior. This ticket is about a non-default option that we do n...
-
- I should also say that the pppoe link is being taken down by unplugging the cable. When the cable is reconnected the...
-
- I have also observed this with 2.0RC3.
In my case the tier 1 interface is pppoe. When it is taken down the defaul...
08/08/2011
-
- Please try a snapshot from tomorrow it should be back to working.
Thanks for your efforts. -
- Hi,
just tested it. The latest working kernel is from July, 27th 2011. The one from the August, 6 2011 snapshot is... -
- Try a snapshot from tomorrow since the port was not rebuild it seems.
-
- Please test next coming snapshots it should be fixed.
-
- It just needs a port rebuild of pfTop.
-
- Please test latest snapshots fixes have been pushed there.
-
07:53 AM Bug #1052: Certificate validation of the LDAPS servers is not enforced
- Ermal Luçi wrote:
> That is because you have to select the CA to use under system->User manager->Servers.
>
> Tha... -
- That is because you have to select the CA to use under system->User manager->Servers.
That will force to use a pol... -
12:24 AM pfSense Packages Bug #1753: Spoink integration
- I'm getting the same error -- however only if I check "Block offenders" (Checking this option will automatically bloc...
08/07/2011
-
04:54 PM Feature #1761 (Rejected): Allow packages files and configuration synchronization for CARP
- I searched the tracker but could not find a feature request on the subject so I am posting a new one.
Is it possib... -
10:00 AM Bug #1759: PPPoE not working
- Hi,
had experienced the same w/ the August 2nd snapshot.
Ping was working, but no data connection made it... Did... -
- Hi,
I'm going to test this evening when someone is at the location.
KR,
Grimeton
-
- Hi,
I can confirm that the last working update is *pfSense-Full-Update-2.0-RC3-amd64-20110728-0359.tgz*, I do not ...
08/06/2011
-
- as shown here: http://forum.pfsense.org/index.php/topic,39527.0.html
-
- I suspect the fix for wrong checksums on PPTP traffic is breaking this. last build without that would be 20110727, pl...
-
- Hi,
I copied the kernel by hand over to the box.
And that's all that changed. Full RC3 from August, 5 2011 and ... -
- PPPoE has very little to do with the Kernel in that way - you are referring to a firmware update, perhaps? Or did you...
-
- Hello,
I just updated to the latest snapshot, August,5 2011 on a box that connects to internet via pppoe.
After... -
- this particular issue is fixed. the one you noted is in #1753
-
- Can this be reopened? All week I've been helping Ermal test i386 platform. I've done a fresh amd64 install and receiv...
-
- I've upgraded to today's nightly: It doesn't work for openvpn nor diag_authentication.php
for openvpn: ldap_setup_...
08/05/2011
-
-
02:21 PM Bug #1688: DHCP server subnet input validation needs to check config.xml, not ifconfig
- Bug ist fixed. Used version for testing: 2.0-RC3 (i386) built on Wed Aug 3 20:04:02 EDT 2011
-
08:03 PM Bug #1758 (Resolved): Upgrade fails to upgrade RRD data for traffic and packets
- Running a nanobsd upgrade from 1.2.3 to 2.0-RC3 gives the following errors:
Aug 4 22:22:20 roadblock php: : The c... -
- All RRD graphs are working fine @ Pfsense nanobsd 1G 2.0-RC3 (i386) built on Wed Aug 3 20:04:02 EDT 2011
-
-
- I am using Alix 2d3 and the 1G image. All RRD graphs are shown correctly so I think it is a user specific problem and...
-
- Today snort start/stop relies on greping through processes while it could rely on pid files for each of them to make ...
-
- The configuration files of snort do not need to reside on /usr/local filesystem since this make it unfriendly for emb...
-
- The correctness of the Alerts and blocked pages is unknown.
-
- The status->Services page is not usable with snort.
Either the displaying of snort there should be removed or code... -
- For the alert_pf option the snort package needs the spoink code.
This code is not present today on the snort packa... -
- The error handling is almost in existent in the package.
As an example: if you remove an item in a screen it does ... -
- The present snort package architecture relies on poor linkage between the information configured in the different scr...
-
- Presently the downloaded rules are copy/pasted for each configured interface.
This is not good from space considerat... -
- The present snort package architecture will forget any customization done to the rules and categories after a rules u...
-
- Rules GUI is partially implemented.
The editing/saving is not completely working.
-
- Barnyard2 will not always run as expected because code to start/stop it is not correct.
The GUI seems to be left hal... -
- The code of the preprocessor rules is buggy and it does not work.
The saving on the GUI of selected options is not...
08/04/2011
-
- Try it after the next new snapshot (dated after this post)
-
- Hi,
was using RC3 with squid+lightsquid.
Upgraded to the build to "Wed Aug 3 19:24:43 EDT 2011".
At reboot proba... -
-
- issue seems to be resolved! Thanks Ermal!
-
- And as of commit:5d6bade495483d81dee13b429b95867cd87c2236 the xauth+ldap bits are in 2.1 already, so it's already bee...
-
- Actually you are referring to the LDAP patch, this ticket is for something else entirely. Yours is probably closer to...
-
09:54 AM Bug #1393: IPSec Xauth
- Lastly I ran into the same issue, according to the post of jimp support for IPsec xauth is not going to happen until ...
-
- Please post on the forum for help diagnosing such issues, since often there are configuration tweaks that can mitigat...
-
08:14 AM
Bug #1745 (Rejected): various Kernel panics with 2 identical NICs
- We have two identical HP Servers (DL180 G6), same hardware and all, which originally came
with one 4-port NIC and on...
08/03/2011
-
- Please followup in the forum
-
12:58 AM Bug #1734: Traffic Shaper Issues in resent builds
- ermal,
You are correct, I am using the PRIQ discipline.
Initial testing indicates that adding a value to the Ba... -
- Should be fixed by latest commits.
-
- Change https://github.com/bsdperimeter/pfsense/commit/27018d3cc4f12c995efadf5dc5ba90eb7c1aa641 broke package menu ite...
-
- Should be OK now.
-
- Can you please test with the lastest version of the package and tell which browser it does not work?
-
11:38 AM Bug #1344: Replace prototype javascript code with jQuery
- I wanted an "enhanced" multi select box for something I was working on and although Chosen looks absolutely brilliant...
-
10:33 AM pfSense Packages Bug #1742: Installation of Varnish on pfS RC broken and makes machine unusable
- Fix seems to have worked. Much thanks :D
-
- Applied in changeset commit:4ed88cf4a9b82b07003d0a03b0952f6697b2e3cb.
-
- When installing Varnish package from packages menu, install gets stuck at:
Loading package configuration... done.
C... -
07:58 AM Bug #1741 (Resolved): Default page when not authorised
- We have found that when a user tries to go to a page which is not in their effective privileges list they are redirec...
-
- After creating a new user with limited permissions we found that the full menu structure was shown regardless. We hav...
-
06:10 AM Bug #636: layer7 not work correctly
- Still seeing the same issue. Using 2.0-RC3 (i386) built on Tue Aug 2 19:07:41 EDT 2011
-
- Using i386 snapshot from Aug 2 on a PC
-
- I was creating a cert request.
Selected 1K key.
Entered illegal chars for a value, and submitting the page hinted m... -
-
- fixed
-
- fixed
-
-
04:18 AM pfSense Packages Bug #1236: Anyterm package doesn't start after upgrade
Hi.
Running: 2.0-RC3 (i386) built on Sun Jul 31 05:05:32 EDT 2011.
The issue I see is that if I don't put ...-
-
Hi.
Let see if the help, I have running:
2.0-RC3 (i386) built on Sun Jul 31 05:05:32 EDT 2011
And hav...-
01:00 AM Bug #1738 (New): Restore fails when username in backup is not matching
- It's not likely that it will happen to anyone, but the consequences are quite time consuming.
When on the default ... -
12:14 AM pfSense Packages Bug #1737 (Closed): ospfd - Route deleted after reboot and reload of the ospfd process
- I have installed PfSense2.0-RC3.
The wan interface is em0 with ip 2.2.2.2/24
The lan interface is em1 with ip 10....
08/02/2011
-
09:37 PM Bug #611: Firmware upgrade error: "There has been an error verifying the signature on this image."
- It's a refreshing issue. If you chenga the update url to something than change it back, it works.
-
- This problem occurs on pfSense 2 RC3. I have checked "Allow auto-update firmware images with a missing or invalid dig...
-
08:32 PM Bug #1629: invalid state table entries after WAN IP change
- I just copied the system log page and state table in attached document.
Would collecting the data with a syslog se... -
- Does this happen on current snapshots? I can't reproduce this in a VM.
-
- I also upgraded new snap today,but nothing changed.Ermal you can test yourself ipsec drop after pptp client disconnec...
-
- Presently only admin user, hardcoded, can allow the sync of the user data through xmlrpc.
It would need to be done... -
12:11 AM Bug #1572: DHCP + MAC spoofing leads to link cycling
- I now wonder if it's also this:
http://forum.pfsense.org/index.php/topic,36643.0.html
if so, I can reproduce but al...
Also available in: Atom