Activity
From 09/27/2011 to 10/26/2011
10/26/2011
-
10:40 PM Bug #1918: update status
- In almost all cases, such errors are resolved by clearing your browser's cache or closing and opening the browser ses...
-
09:22 PM Bug #1918: update status
- Just noticed the same problem. This is a stock release that was upgraded from RC1 to RELEASE. I haven't altered any...
-
10:38 PM Bug #1981 (Closed): lighttpd errorlog using text rather than clog format
- Please note that the format of /var/log/lighttpd.error is text rather than clog, which could potentially eat up disks...
-
09:14 PM Revision 4659f856: Fix up syslog settings a bit, add some missing options, fix formatting of syslog.conf, correct behavior of 'everything', code cleanup.
-
09:14 PM Revision 236524c2: Fix up syslog settings a bit, add some missing options, fix formatting of syslog.conf, correct behavior of 'everything', code cleanup.
-
05:48 PM Feature #1938: Filter messages broken into multiple syslog messages
- Wow, that's troubling. I escaped it because it looked like PHP was swallowing the backslash. But I'm looking now and ...
-
05:14 PM Feature #1938: Filter messages broken into multiple syslog messages
- A warning to those trying the proposed change, it doesn't quite work as written. It works if you run it from the comm...
-
01:17 PM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- Chris Buechler wrote:
> we're working on it. a partial fix will be in 2.0.1 though not sure we can get it entirely f... -
01:15 PM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- we're working on it. a partial fix will be in 2.0.1 though not sure we can get it entirely fixed for then (it's comin...
-
01:12 PM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- Hafiz Rafiyev wrote:
> anybody working on this urgent bug?
Not that I am aware of. I also have an embedded test... -
12:09 PM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- anybody working on this urgent bug?
-
10:14 AM Bug #1928: Can't sync voucher database when carp peer is also active
- I deleted the CARP sync so that the voucher database keeps syncing fine but when the master goes down I still can't g...
-
09:29 AM Revision 12a2f395: Fix the 2nd grow command, add space
- Ticket #1758
-
08:13 AM Revision 16cc1c10: Increase the GROW for the 60 minute RRA so that we have atleast 2160 entries for 3 months worth of data.
-
06:45 AM Revision 4fe54cdf: Add back the accidentally removed xml rrd restore line, otherwise we still don't have the new RRD file
- Ticket #1758
10/25/2011
-
08:05 PM Revision b0b48a57: Correct typo in command.
- Ticket #1758
-
07:49 PM Revision eb346e0b: Ok, let's try not to corrupt the RRD files on upgrade. Leave the RRA arc
- hives for the 720 minutes average at 1000.
Then run a rrdtool resize command to grow the RRA by 1000 and 2000 for the... -
06:26 PM Revision d7778a7b: Ok, let's try not to corrupt the RRD files on upgrade. Leave the RRA archives for the 720 minutes average at 1000.
- Then run a rrdtool resize command to grow the RRA by 1000 and 2000 for the 60 and 720 average respectively.
Attempts ... -
05:34 PM Bug #1980 (Closed): RFC 2136 will not update two records for one interface
- If you have two entries for the same interface, only the top one in the list will be updated when the address of that...
-
03:06 PM Revision 4d89e4d7: Do not pass the ldap port separately, but add it to the LDAP URL. PHP's ldap_connect() ignores the passed port parameter if the first parameter is a URL instead of a hostname.
-
03:05 PM Revision 9f27de6d: Do not pass the ldap port separately, but add it to the LDAP URL. PHP's ldap_connect() ignores the passed port parameter if the first parameter is a URL instead of a hostname.
-
01:42 PM Feature #1979 (Resolved): Allow user-defined rules to utilize built-in system aliases
- It would be useful to have some stock aliases that come by default which are not editable by users. These aliases wou...
-
01:03 PM Feature #1913 (Resolved): Add relayd to Status > Services
-
08:47 AM Bug #1978 (Resolved): Multi-WAN+Multi-LAN shaper wizard VoIP bandwidth check is wrong
- In traffic_shaper_wizard_multi_all.xml wizard when you get to the VoIP bandwidth screen there is a box for each WAN, ...
-
12:00 AM Bug #1948 (Resolved): VoIP Rule from shaper wizard doesn't work as the description implies
10/24/2011
-
11:57 PM Bug #1920 (Resolved): Incorrect title banner in 2 of 3 "Status: System Logs" Web Configurator pages.
-
11:55 PM Bug #1954 (Closed): Outbound manual nat rules could break CARP
-
11:54 PM Bug #1960 (Resolved): Typo in php script for update status
-
11:28 PM Bug #1888: Upgrade ISC dhcpd to v4.2.2
- ISC DHCP 4.2.3 was released on 19 Oct 2011
http://www.isc.org/software/dhcp -
10:34 PM Revision ea1cea05: Converting javascript code from prototype to jQuery
-
10:11 PM Bug #1976: problems with CP MAC pass-through
- #1958 details the same issue, closed it in favor of this one.
-
09:27 PM Bug #1976 (Resolved): problems with CP MAC pass-through
- There are issues with the MAC pass-through, replicable in the following scenarios (use the attached config as a start...
-
10:11 PM Bug #1958 (Closed): CP ipfw ruleset has two rules with the same number
- forgot this was here, opened #1976 instead which has the specific problem.
-
08:48 PM Revision c6023b4a: Show RTT and Loss on Status > Gateways, not just on the widget
-
08:47 PM Revision fc4fa6de: Show RTT and Loss on Status > Gateways, not just on the widget
-
06:21 PM Revision 8f096822: Don't run ldap_urlchange on page load if there is a custom port, otherwise it appears to ignore a custom LDAP port even when it's correct in the config.
-
06:20 PM Revision 230b3b1b: Don't run ldap_urlchange on page load if there is a custom port, otherwise it appears to ignore a custom LDAP port even when it's correct in the config.
-
07:32 AM Bug #1975 (Rejected): Weird Interface Names.
- Looks like a problem with your setup, I've got 2.0 amd64 installed in VirtualBox and it's fine.
Given the crashes ... -
04:09 AM Bug #1975 (Rejected): Weird Interface Names.
- Hello,
just installed the latest release 2.0 amd64 into virtualbox and got weird interface names.
I'm still inv...
10/23/2011
-
07:06 PM Bug #1974 (Resolved): Captive Portal RADIUS accounting bytes wrong
- As discussed here:
http://forum.pfsense.org/index.php/topic,39555.0.html
ipfw entrystats is returning wrong valu... - 01:22 AM Revision 79226d4f: fix text
- 01:21 AM Revision 9f07c343: fix text
10/22/2011
-
10:13 PM Revision e03ef9a0: Converting ajax code from prototype to jQuery
-
10:00 PM pfSense Packages Feature #1973 (Closed): Update siproxd to v0.8.1
- http://siproxd.sourceforge.net/index.php?op=changelog
> Release 0.8.1
> 10-Jul-2011
> This release fixes some bu... -
09:56 PM Bug #1336: PPTP VPN NAT on WAN or other external interface
- Test 2.0-Release This problem has been resolved.
Thank you pfsense team effort. -
07:02 PM Revision 78d84a88: Converting from prototype to jQuery status_*
-
07:01 PM Revision ef9773a5: Converting from prototype to jQuery
10/21/2011
-
10:11 PM pfSense Packages Bug #1749: Rules/ Categories update
- I am seeing this issue with 2.0 release, amd64. The process that autogenerates oinkmaster_nnnnnn_em0.conf is creating...
-
04:42 PM Bug #1968: webconfigurator dies
- well,I will try to unlock as suggested next time if it happens again.
Something I did not mention here, related to... -
03:20 PM Bug #1968: webconfigurator dies
- Probably the rate command is hanging on status_graph.php and if a command hangs like that, it hangs up fastcgi, which...
-
03:13 PM Bug #1968: webconfigurator dies
- ok,
new freeze of web interface WITHOUT modification.
This eliminates totally 'syntax error'
I made following in... -
03:05 PM Revision 2c73ba5f: Shorten the NEGATE rule label as these are too long
-
03:02 PM Feature #1972 (Resolved): Allow /31 networks to be configured
- http://svn.freebsd.org/changeset/base/226402
Needs to be allowed on the web interface. -
02:39 PM Bug #1971 (Rejected): carp sync username not honored
- Duplicate of #1736
-
02:33 PM Bug #1971 (Rejected): carp sync username not honored
- Carp sync appears to not use the @Remote System Username@ anymore, but always sends @admin@ as the username.
I had... -
01:44 PM Revision 64758836: Shorten the NEGATE rule label as these are too long
-
08:04 AM Bug #1970: IPsec stops routing after a while
- Might be related to #1351
Also this post to the ipsec-tools list sounds similar:
http://sourceforge.net/mailarchi...
10/20/2011
-
05:14 PM Bug #1969: IPsec refuses connection after first Cisco Client connection
- I believe this to be the same issue as bug 1970, except that somehow the Cisco client is not disconnecting properly (...
-
05:12 PM Bug #1970: IPsec stops routing after a while
- Attached are logfiles. First is a connection while racoon is in a hung state, followed by 4 pings to 8.8.8.8 (all ti...
-
05:05 AM Bug #1970 (Resolved): IPsec stops routing after a while
- Using the same setup as this bug:
http://redmine.pfsense.org/issues/1969
It appears that after a while with no cl... -
02:49 PM Bug #1968: webconfigurator dies
- no, no other addon, pure valilla pfsense 2.0 !
It is not my habit to spell www.something Www.something.
I have no... -
02:32 PM pfSense Packages Bug #1443: Squid errors on updating version
- This is now less of an issue as I have found that Squid will still run correctly. The error messages still appear, bu...
-
02:09 PM Bug #1402: When creating a QinQ it works until reboot.
- Hi,
I'm experiencing the same trouble with qinq.
*My platform* : Pfsense 2.0 amd64
*What I am trying to do* ... -
12:52 AM pfSense Packages Bug #1749: Rules/ Categories update
- I too have noticed this problem. Even though Snort will say "reapplying enabled/disabled rules" when doing an updated...
10/19/2011
-
11:20 PM Bug #1969 (Resolved): IPsec refuses connection after first Cisco Client connection
- Full details etc in thread
http://forum.pfsense.org/index.php/topic,41631.0.html
I have mobile IPsec set up, and... -
07:02 PM Bug #1968 (Feedback): webconfigurator dies
- it's not that simple. need the specific problem, this isn't adequate as a bug report. I suspect it's an installed pac...
-
06:31 PM Bug #1968 (Closed): webconfigurator dies
- --- /conf/backup/config-1319057958.xml 2011-10-19 23:18:58.000000000 +0200
+++ /conf/backup/config-1319057344.xml 20... -
06:43 PM Revision 976db9de: More typos/text fixes.
-
06:39 PM Revision f65555eb: More typos/text fixes.
-
05:59 PM Revision a499d560: Fix typo
-
05:59 PM Revision 7b230103: Fix typo
-
05:16 PM Revision 7492e6c3: Fix typo
-
05:16 PM Revision 08847295: Fix typo
-
06:55 AM Revision 1005d4bf: Add the OOM memory restructuring fix from Ticket #1758 into mainline for nanoBSD upgrades.
-
03:11 AM pfSense Packages Bug #1443: Squid errors on updating version
- I just checked and this is happening in the release version as well, in both VMware and on physical hardware.
10/18/2011
-
03:22 PM Bug #1856 (Closed): Removing a Phase 2 does not remove the SPD policy
- Failed to replicate on current code.
more /tmp/spd.conf.reload.1318965869.ob2B1v
spddelete -6 2001:470:d72c:0:0:... -
08:41 AM Revision 1e3c94dd: Modify code to remove memory usage to prevent a Out of Memory condition when upgrading the RRD database on a 128MB system.
- Ticket #1758
-
07:33 AM Revision 9dfd60db: Add a check to prevent this gateway code from triggering the address family check. This might not be all that is needed for Ticket #1949
-
05:54 AM Bug #1758 (Feedback): Upgrade fails to upgrade RRD data for traffic and packets
- Ok, so the code now triggers properly on a nanobsd system but it causes a Out of Memory situation on a 128MB system (...
-
03:36 AM Bug #1949 (Feedback): can not set gateway group on a filter rule.
- The fix seems to work as intended, I tried switching filter rules back and forth on protocol, gateways, groups and ad...
-
03:01 AM Bug #1950 (Feedback): "Bypass firewall rules for traffic on the same interface" doesn't work as intended
- The direct_networks table was never used but initially created for the purpose of negate policy based routing rules. ...
10/17/2011
-
05:10 PM pfSense Packages Bug #1966 (Resolved): 500 Error On Graph Request of LightSquid
- System
------
I have PfSense version 2.0 (built on Tue Sep 13 17:33:40 EDT 2011), installed Squid 2.7.9_4.2 and Lig... -
03:13 PM Revision 7cc56826: Add missing ?, fix uname display. Fixes #1960
-
03:12 PM Revision ebcd13ca: Add missing ?, fix uname display. Fixes #1960
-
02:57 PM Feature #1965 (Resolved): Support Multiple IPsec Peers
- In the future it would be nice to have IPsec allow connections to/from multiple peers for the same tunnel, for failov...
-
11:10 AM Bug #1960: Typo in php script for update status
- Applied in changeset commit:ebcd13cac1f5d83f7352016c9bc750adfd6e21fa.
-
11:10 AM Bug #1960 (Feedback): Typo in php script for update status
- Applied in changeset commit:7cc56826c8036cac40b95aab8e1c6349741e5e01.
-
11:10 AM Bug #1964: Changing MTU on pfSense 2.0 doesn't work
- The ticket system is not for troubleshooting or help - please keep it on the forum.
-
11:04 AM Bug #1964: Changing MTU on pfSense 2.0 doesn't work
- Why in pfsense 1.2.3 or in a linux-based firewall as Kerio Control it works and in pfSense 2.0 it doesn't work???
I'... -
11:00 AM Bug #1964: Changing MTU on pfSense 2.0 doesn't work
- Then your MTU is 1496. It changed as it was supposed to - which means the MTU change is not the problem, and you have...
-
10:59 AM Bug #1964: Changing MTU on pfSense 2.0 doesn't work
- Yes, I get the same ifconfig when I change MTU on the WebGUI, but it doesn't work, while if I do the same things in p...
-
10:52 AM Bug #1964 (Rejected): Changing MTU on pfSense 2.0 doesn't work
- Please keep the discussion on the forum until a bug is confirmed. Changing the MTU works fine.
[2.0-RELEASE][root@... -
10:35 AM Bug #1964 (Rejected): Changing MTU on pfSense 2.0 doesn't work
- I tried to change MTU on pfSense 2.0 into 1496 because of my internet connection needs. While i could get it working ...
-
02:08 AM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- Hafiz Rafiyev wrote:
> any progress abouts this bug?
Don't know. Was never contacted after my last comment nearl... -
01:56 AM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
I second that question! Is there something anyone needs, such as access to an online system that can reproduce ...-
01:36 AM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- any progress abouts this bug?
10/16/2011
- 08:05 PM Revision ebfc87d6: Converting from prototype to jQuery
- 08:05 PM Revision e3c1ea9b: converting from prototype to jQuery
-
05:54 PM Bug #1963 (Resolved): CP Voucher submission - 'Enter' button does not submit form in MSIE
- Please note that the default webpage generated by get_default_captive_portal_html() /etc/inc/captiveportal.inc with a...
-
08:35 AM Feature #1962 (Closed): disconnect specific pptpd interface from command line
- For pfsense usage in secured network ability to disconnect specific dialin user or interface is must.
if some one k... -
12:49 AM pfSense Packages Bug #1961 (Closed): Spoink and IP banning
- Hello,
this request follows this post on the Forum: http://forum.pfsense.org/index.php/topic,41895.0.html.
Su...
10/15/2011
-
07:26 PM Bug #1960 (Resolved): Typo in php script for update status
- Hi,
I've just been messing with the Dashboard and found a "bug" in the html source as shown in the picture added. -
02:09 PM Bug #1959: openssl does not accept ECC-certificates
- funny that it's possible to create a ecc-certificate using the older binary but it only works on the newer one ….
-
02:07 PM Bug #1959: openssl does not accept ECC-certificates
- related to this one #1851
-
02:06 PM Bug #1959 (Resolved): openssl does not accept ECC-certificates
- The default openssl-package will not work with ECC-certificates...
-
12:37 PM Bug #1851: ECC-Cert breaks the webconfigurator
- maybe testing using the php-function "openssl_pkey_get_details" and checking for return-level could sanitize uploadin...
-
12:04 PM Revision e1fd8311: Fixes #1948. Do not specify an interface for the Voip rules that intend a source ip.
-
12:04 PM Revision 8800783f: Fixes #1948. Do not specify an interface for the Voip rules that intend a source ip.
-
08:05 AM Bug #1948: VoIP Rule from shaper wizard doesn't work as the description implies
- Applied in changeset commit:8800783f5d513c7ff0cbb890d988f95ac9db4df9.
-
08:05 AM Bug #1948 (Feedback): VoIP Rule from shaper wizard doesn't work as the description implies
- Applied in changeset commit:e1fd8311bd36906e423c4c711dc3133078e8a464.
-
07:56 AM Feature #1901: Maintain IP range tables for popular Internet sites
- I do not like that since you cannot draw the line what is more important and what is to skip.
-
07:54 AM Bug #1944 (Closed): Typo in /etc/inc/voucher.inc
- Either was fixed from someone else or it was not an issue.
It is correct in code either way. -
07:46 AM Bug #1956 (Closed): Detect if logout was succesful
- I do not see any usefulness on this!
-
07:45 AM Bug #1957: Remove button-inside-hyperlink usage from web forms
- Patches accepted!
-
06:59 AM Bug #1958: CP ipfw ruleset has two rules with the same number
- notes from originator: ...
10/14/2011
-
08:03 PM Bug #1958 (Closed): CP ipfw ruleset has two rules with the same number
- Not at all sure if it's an issue or not (haven't used ipfw before), but I've noticed that on my system 'ipfw show' pr...
-
09:24 AM Bug #1957 (Resolved): Remove button-inside-hyperlink usage from web forms
- Having an <input type="button"> inside an <a href="..."> is technically a violation of HTML5. Also, it makes the butt...
-
05:20 AM Bug #1951 (Rejected): Auto generated reply-to rules not working
- no specific bug here, need to post things like this to the list or forum first as it's more likely a config issue as ...
-
04:03 AM Bug #1956 (Closed): Detect if logout was succesful
- Currently, a message "You have been disconnected." is shown regardless whether the user was logged in before or not. ...
10/13/2011
-
07:51 PM Revision cf37ec23: Remove the old direct_networks table which is not used throughout the filter code. Instead we now create a negate_networks table which contains both vpns, directly connected networks (static routes) which should never be tagged for policy routing which breaks traffic.
- This fixes Ticket #1950 and needs to be MFC to 2.0 for 2.0.1
-
06:47 PM Revision c066ea8a: Remove the old direct_networks table which is not used throughout the filter code. Instead we now create a negate_networks table which contains both vpns, directly connected networks (static routes) which should never be tagged for policy routing which breaks traffic.
- This fixes Ticket #1950 and needs to be MFC to 2.0 for 2.0.1
Conflicts:
etc/inc/filter.inc -
02:58 PM Revision f7dc7ce1: Add no nat/rdr rules for carp protocol so people do not screw their setups.
-
02:58 PM Revision 378b2987: Add no nat/rdr rules for carp protocol so people do not screw their setups.
-
12:28 PM Revision 7ad4b1f4: Move the old databases to the backup folder in conf
- Fixes ticket #1758
-
12:28 PM Revision eb5e790f: Restore the RRD backup before attempting a migration as this bites the nanobsd users.
- We immediately backup the new databases to a new rrd.tgz file. The old database will be moved to /root
Fix for ticket... -
12:15 PM Revision 8fa054b1: Move the old databases to the backup folder in conf
- Fixes ticket #1758
-
12:12 PM Revision e34cf1f6: Restore the RRD backup before attempting a migration as this bites the nanobsd users.
- We immediately backup the new databases to a new rrd.tgz file. The old database will be moved to /root
Fix for ticket... -
11:34 AM Bug #1951: Auto generated reply-to rules not working
- 6 Screenshots attached. The Floating and Interface Group rules were only enabled one at a time. They are both disable...
-
11:10 AM Bug #1951: Auto generated reply-to rules not working
- Without showing what you configured on the floating rules i cannot give you a real answer.
My first guess is that ... -
11:09 AM Bug #1954 (Feedback): Outbound manual nat rules could break CARP
- A fix has been put in for 2.0.1 to prevent nat from messing with carp packets.
-
11:07 AM Bug #1954 (Closed): Outbound manual nat rules could break CARP
- If user create manual outbound rules with source any it can break carp protocol.
Prevent this by adding protection n... -
11:07 AM Bug #1948: VoIP Rule from shaper wizard doesn't work as the description implies
- That is true actually.
I will try to put a reasonable fix soon.
For now just remove the interface that is auto-se... -
06:00 AM Bug #1758: Upgrade fails to upgrade RRD data for traffic and packets
- Just a FYI in case people want to upgrade their 1.2.3 databases on their 2.0 installs. Executing the following code o...
10/12/2011
-
07:43 PM Bug #1951 (Rejected): Auto generated reply-to rules not working
- In Multi-WAN setups, traffic seems to always leave the default gateway no matter what interface it entered on. For te...
-
05:05 PM Bug #1950 (Resolved): "Bypass firewall rules for traffic on the same interface" doesn't work as intended
- The rules from "Bypass firewall rules for traffic on the same interface" go at the end of the ruleset, and thus are n...
-
11:10 AM Bug #1949 (Resolved): can not set gateway group on a filter rule.
- When trying to set a gateway group on a filter rule in 2.1 the address family validation triggers. This needs an addi...
10/11/2011
-
09:31 PM Revision 3f57df75: Disable could not find gateway for FOO log message. It is not causing any trouble and is making folks feel like there is something wrong with their install when there really is no issues.
-
07:56 PM Revision ad700f39: Fix static routes editing and removal for both IPv4 and IPv6. Changing a route should clean up too.
- Fix ticket #1892
-
04:30 PM Bug #1948 (Resolved): VoIP Rule from shaper wizard doesn't work as the description implies
- When using the shaper wizard, the text description for VoIP prioritization by address isn't consistent with the resul...
-
03:37 PM Revision d8b989bc: Correct the updates path
-
04:54 AM Bug #1946 (New): /usr/local/www/services_captiveportal.php
- The description is wrong and the fix is wrong. Opening this because it appears committing a fix broke at least someth...
- 12:00 AM Revision df39dd8a: replacing prototype by jQuery on firewall_*
10/10/2011
-
08:05 PM pfSense Packages Bug #1765: Unable able to clear Snort Alerts
- I uninstalled and reinstall the snort package. Its still not clearing the log. I dont get a blank page anymore. Just ...
-
07:54 PM Revision 0491163b: Merge pull request #14 from bcyrill/master
- fix 1946
-
07:52 PM Revision 13a45484: fix Bug 1946
-
07:50 PM Revision 8d344afe: Merge pull request #13 from bcyrill/master
- Bug 1944
-
07:46 PM Revision 52bb3619: fix typo (Bug 1944)
-
07:18 PM Revision d568e38d: Fix multi instance cp items. Fixes #1946
-
07:15 PM Revision 164a1525: Fix multi instance cp items. Fixes #1946
-
06:46 PM Revision 943b7053: Revert "Add zone. Fixes #1945"
- This reverts commit 8a880cb97227c3cd41ed236d06e3188f97cea2ee.
-
06:44 PM Feature #1947 (New): Option to kill all states when creating a block rule
- When creating a block rule you have the option to close all states relevant to the rule.
-
06:41 PM Revision 8a880cb9: Add zone. Fixes #1945
-
06:41 PM Revision 5dd5ef52: Add zone. Fixes #1945
-
03:44 PM Bug #1676 (Feedback): dead IPv6 gateway causes kernel panics
- Word is that the move to FreeBSD 9 will solve some of the issues as the ipsec socketbuffer patch will be gone.
-
03:42 PM Bug #1892: Cannot static add static IPv6 route.
- Your "fix" is not correct approach, needs more work. We need to be able to set a larger mask in case of a new ipv6 en...
-
03:39 PM Bug #1758: Upgrade fails to upgrade RRD data for traffic and packets
- In config step x we run the following commands. The only things I can think of is that these have failed.
function... -
01:40 PM Bug #1758: Upgrade fails to upgrade RRD data for traffic and packets
- OK, I'm no expert on RRD, but have done a little more digging on this.
In 1.2.3, the Traffic and Packet RRDs were ... -
03:24 PM Bug #1946: /usr/local/www/services_captiveportal.php
- Please open a new ticket for subsequent issues and please be sure the line #'s correspond with the prior changes.
... -
03:22 PM Bug #1946: /usr/local/www/services_captiveportal.php
- Small error in commit (Revision 164a1525)
>lines 272 to 293
replace $config['captiveportal'] with $newcp
e.g. ... -
03:15 PM Bug #1946: /usr/local/www/services_captiveportal.php
- Applied in changeset commit:164a152577ccce56f896ea5ef020fcfbf60fe896.
-
03:15 PM Bug #1946 (Feedback): /usr/local/www/services_captiveportal.php
- Applied in changeset commit:d568e38d0275efebbe0c1969e26b31bdf125570e.
-
03:13 PM Bug #1946: /usr/local/www/services_captiveportal.php
- line 642
replace @second@ with @third@
line 661
replace @second@ with @fourth@ -
03:06 PM Bug #1946 (Closed): /usr/local/www/services_captiveportal.php
- /usr/local/www/services_captiveportal.php
lines 272 to 293
replace @$config['captiveportal']@ with @$newcp@
li... -
02:45 PM Bug #1945: Missing zone parameter
- Applied in changeset commit:943b7053835d0928c79af1bfe32fa6fc8d6d2b6a.
-
02:40 PM Bug #1945: Missing zone parameter
- Applied in changeset commit:5dd5ef52a5676415da4acef460dc2244d9eb8dbf.
-
02:40 PM Bug #1945 (Feedback): Missing zone parameter
- Applied in changeset commit:8a880cb97227c3cd41ed236d06e3188f97cea2ee.
-
02:32 PM Bug #1945 (Closed): Missing zone parameter
- line 336 in /usr/local/www/services_captiveportal_vouchers.php...
-
02:15 PM Bug #1944 (Closed): Typo in /etc/inc/voucher.inc
- line 667 in /etc/inc/voucher.inc...
-
12:04 PM Feature #1901: Maintain IP range tables for popular Internet sites
- Sure if you would want to "cover all the bases" you'd need to monitor DNS traffic and add IPs to the passthrough list...
-
10:00 AM Feature #1901: Maintain IP range tables for popular Internet sites
- The only option here is to create a transparent proxy for dns and hook that up with daemons as filterdns.
All other ... -
09:51 AM Bug #1928: Can't sync voucher database when carp peer is also active
- It is not meant to work that way!
The voucher sync will sync with the master or use it as its central database.
I... -
06:26 AM Bug #1943 (Closed): PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- (Copied from http://forum.pfsense.org/index.php/topic,40671.msg209656.html#msg209656)
Attached are four files. Her...
10/09/2011
-
05:15 PM pfSense Packages Bug #1942 (Resolved): snort_blocked.php loads blank
- Once snort has a large amount of blocked hosts the page doesn't load and a view source shows no html at all. This is ...
-
01:18 PM Todo #1568 (Resolved): Import the IPv6 patch that allows router advertisements with forwarding enabled
- Correct, it is not needed on FreeBSD9 where a alternative is already checked in by Bjoern.
The patch we use from m... -
12:31 PM Todo #1568 (Feedback): Import the IPv6 patch that allows router advertisements with forwarding enabled
- Probably not needed on 9.
-
12:46 PM Feature #1829 (Feedback): CARP with IPv6 support
- Patch is active for 9 for FreeBSD 8 base it needs to be included by hand on builds to not create issues with 2.0 builds.
- 08:56 AM Revision 573ae2d1: fix typo. redmine #1941
-
07:17 AM pfSense Packages Feature #1815: OpenVPN Client Export Additional Parameters
- I know, I added and submitted it on github :)
Thanks for closing the issue, I forgot about that! -
06:36 AM pfSense Packages Feature #1815 (Closed): OpenVPN Client Export Additional Parameters
- There is an advanced section there that allows this
-
06:57 AM pfSense Packages Bug #1873 (Closed): Layer 7 RDP
- the filters come from l7filter so it would need to be fixed there. They classify RDP as "OK: Probably works", but the...
-
06:31 AM pfSense Packages Bug #1873: Layer 7 RDP
- You are sure your rdp is not encrypted?
-
06:37 AM pfSense Packages Bug #1689 (Resolved): Home URL broken from package paths
- This has been solved for 2.0
-
06:34 AM pfSense Packages Bug #1765 (Feedback): Unable able to clear Snort Alerts
- This should be fixed since long now
-
06:33 AM pfSense Packages Bug #1753 (Resolved): Spoink integration
-
04:53 AM Bug #1941 (Resolved): Typo in voucher_save_db_to_config function
- fixed, thanks
10/08/2011
- 09:36 PM Revision 3f978888: converting from prototype to jQuery on interfaces_assign.php
-
07:04 PM Bug #1941: Typo in voucher_save_db_to_config function
- Category: Captive Portal
Affected version: 2.1-IPv6
Affected Architecture: All -
06:45 PM Bug #1941 (Resolved): Typo in voucher_save_db_to_config function
- line 660 in /etc/inc/voucher.inc...
-
12:27 PM Revision dbe67167: Fixes issue with l2tp interfaces and altq
-
12:26 PM Revision 041e3190: Fixes issue with l2tp interfaces and altq
-
11:45 AM Feature #1938: Filter messages broken into multiple syslog messages
- I don't know that I would call returning to the original functionality a "feature", this is a "bug" that broke the sy...
-
05:48 AM Feature #1938: Filter messages broken into multiple syslog messages
- Probably some daemon should be done that reads this and does not complain much.
Does not seem hard to merge the tcpd... -
04:40 AM Feature #1938 (Feedback): Filter messages broken into multiple syslog messages
- this is the default logging format and not sure it should be changed, leaving as feedback for thoughts from others. M...
-
07:14 AM Todo #1940 (New): Integrate rSyslogd
- Seems its a better alternative to syslog since it supports encryption and can secure communication.
http://www.freeb... -
05:51 AM Feature #1883: Diag > Limiter Info presentation enhancement
- I am working on this.
-
12:35 AM Bug #1939 (Closed): Atheros DCMA-82 w/ IBSS has kernel panic
- I'm trying to put together a Netgate ALIX kit for which I also picked up this wireless card that specifically states ...
10/07/2011
-
09:38 PM Feature #1938 (Resolved): Filter messages broken into multiple syslog messages
- The filter messages are being fragmented into multiple syslog message making filter log parsing difficult and unrelia...
-
02:35 PM Feature #1937 (New): Support for rule groupings
- I accidentally deleted the earlier one when I was trying to delete an incorrect comment.
would be nice to have su... -
09:31 AM Feature #1935 (New): Allow rule with max-src-conn-* options to make conditional use of "overload <virusprot>"
- Firewall: Rules: Advanced Options offers various options, to limit max number of connections per source IP and connec...
-
08:26 AM Todo #1934 (Resolved): Add input validation for interface addresses in GUI and console
- When entering an IP address for an interface in the GUI or the console, it would make sense to reject the input if th...
-
05:07 AM Feature #1933 (Resolved): Support for interface groups in NAT screens
- would be nice to have support for interface groups in the NAT screens
-
04:10 AM pfSense Packages Bug #1930 (Closed): Multiple package install failures on fresh 2.0 install
10/06/2011
-
07:42 PM Revision b8f855af: Add curly braces to fix code logic. See http://forum.pfsense.org/index.php/topic,40953.msg215068.html#msg215068
-
01:24 PM Revision 05ff388a: Allow multiple PBI packages in one tag space separated
-
12:55 PM Feature #1932 (Resolved): Captive Portal add RADIUS attributes for traffic quotas
- AFAIK pfsense NAS recognizes the WISPr RADIUS attributes such as
WISPr-Bandwidth-Max-Up
WISPr-Bandwidth-Max-Down
I... -
09:37 AM pfSense Packages Bug #1930: Multiple package install failures on fresh 2.0 install
- ahh success, whatever you did fixed it! -- all three packages installed correctly...thanks so much
-
09:32 AM pfSense Packages Bug #1930: Multiple package install failures on fresh 2.0 install
- http://files.chi.pfsense.org/mirror/downloads/pfSense-2.0-RELEASE-amd64.iso.gz
-
09:23 AM pfSense Packages Bug #1930: Multiple package install failures on fresh 2.0 install
- Think I found the issue - please try again
-
09:11 AM pfSense Packages Bug #1930: Multiple package install failures on fresh 2.0 install
- PBI's are only available in 2.1 which is not readily available outside of IPV6 testing.. Where did you download this...
-
08:36 AM pfSense Packages Bug #1930 (Closed): Multiple package install failures on fresh 2.0 install
- I have a fresh install of 2.0RELEASE_AMD64 on ESXi
I'm trying to install...
SquidGuard
lightsquid
openvpn cli... -
09:30 AM Bug #1931 (Closed): Status: Captive portal: Test Vouchers tab summary issue
- A minor issue with the Status: Captive portal: Test Vouchers tab
When all vouchers submitted for checking have tim... -
07:16 AM Bug #1928 (Resolved): Can't sync voucher database when carp peer is also active
- Hi,
When I try to sync the voucher database from the slave to the master I get a "Disallowing CARP sync loop" mess...
10/05/2011
-
06:40 PM Feature #1917: DHCP server support for multiple domains in search list
- Needs input validation in web interface as well, that doesn't suffice.
-
06:43 AM Feature #1917: DHCP server support for multiple domains in search list
- To solve this problem, I've written this patch:...
-
02:15 PM Revision 007e59d2: Include certs.inc before calling lookup_ca in auth.inc. Fixes #1927
-
02:15 PM Revision bb37807c: Standardize page titles for firewall log pages. Fixes #1920
-
02:15 PM Revision 099e764a: Include certs.inc before calling lookup_ca in auth.inc. Fixes #1927
-
10:15 AM Bug #1927: missing require in OpenVPN openvpn.auth-user.php template
- Applied in changeset commit:099e764a797146c0dc9810e8f99cd18789a8608e.
-
10:15 AM Bug #1927 (Feedback): missing require in OpenVPN openvpn.auth-user.php template
- Applied in changeset commit:007e59d2bf7d5be02e5cd34d3c1f5d2723ce5149.
-
10:00 AM Bug #1927 (Resolved): missing require in OpenVPN openvpn.auth-user.php template
- Hi,
I was unable to authenticate against LDAP using OpenVPN, and found that the openvpn.auth-user.php template app... -
10:15 AM Bug #1920 (Feedback): Incorrect title banner in 2 of 3 "Status: System Logs" Web Configurator pages.
- Applied in changeset commit:bb37807c45ca5286696e9f5bb3365ce1e529b207.
10/04/2011
-
07:17 AM Bug #1926 (Rejected): CARP in 2.0 only working with username 'admin'
- Duplicate of #1736
-
06:50 AM Bug #1926 (Rejected): CARP in 2.0 only working with username 'admin'
- We upgraded from 1.2.3 where the admin user was not called admin, but eg. 'username'.
'username' was set in 2.0 in...
10/02/2011
- 11:38 PM Revision 076b14b2: converting from prototype to jQuery on interfaces.php
- 08:33 PM Revision 8bb22d9c: Add full path to ssl files and silence warning
-
06:11 PM Feature #1924 (New): Ability of CP's allowed IP addresses to use aliases
- Enhance pfsense's Captive Portal "Allowed IP addresses" to enable the use of IP tables defined as Aliases. This featu...
- 05:08 PM Revision 2ee1cf7b: Use curl instead of dig
-
05:05 PM Bug #1923 (Rejected): RoutingGroups issue
- not likely a bug as all of that works, post to the forum or mailing list for help.
-
02:27 PM Bug #1923 (Rejected): RoutingGroups issue
- I am using routing groups to have my ppp/umts device as tier1 gateway and an Ethernet interface as backup gateway (ti...
10/01/2011
- 10:56 PM Revision 0f2bd251: Add some timeouts
- 09:15 PM Revision 8c87758e: Add fetching of Root name servers hints file to setup
- 09:12 PM Revision 958f144a: Add global for chroot environment
- 09:08 PM Revision 77ff55ea: Remove extra word config
- 09:06 PM Revision 2b6d9c41: Ensure unbound is owner of ssl files
- 08:52 PM Revision 0a3d62f7: Use the correct path for Unbound SSL keys
- 08:51 PM Revision c67d7be7: Use the correct config variable for config
- 08:41 PM Revision 011310aa: Update root anchor for DNSSEC validation
- 08:36 PM Revision 503425de: function shuffling and add missing ;
- 08:22 PM Revision e088c012: Write out Unbound configuration file
- 08:07 PM Revision a57399f4: Update comments and to do
- 08:06 PM Revision 4f9de9b5: Add Unbound read function for /etc/hosts
- 07:37 PM Revision f2265766: Swop dns xml tag for unbound
- 07:34 PM Revision 0a64e626: Make space for Unbound custom options
- 07:27 PM Revision 69508c47: Handle domain overrides and adjust config order
- 06:47 PM Revision 84612dd7: Add Unbound statistics
- 06:26 PM Revision 1485c2da: Add include fore remote control and change files .conf extension
- 06:19 PM Revision 29149246: Add static host entries to separate file and include in main config
- 05:54 PM Revision 5b24d645: Merge branch 'master' of github.com:bsdperimeter/pfsense
- 05:54 PM Revision e9dedc03: Various Unbound functions for configuration
-
05:52 PM Revision 5f471c95: Use the new daemon for status->queues until a proper chart javascript library is availble
- 03:08 AM Revision e237741a: Merge branch 'master' of github.com:bsdperimeter/pfsense
- 03:08 AM Revision df74eeb0: add ability to get root hints file
- 01:47 AM Revision 169f1574: Create symlinks for packages config files into the PBI directory
- 01:47 AM Revision 9b1b25ee: Fix pbi_info path
- 01:47 AM Revision a6410107: Remove line forgotten last commit
- 01:03 AM Revision 7e0d217d: Start for various Unbound functions
-
12:20 AM Revision 1e656ec4: Change the way syslogd is killed/restarted a bit. Fixes log related pages hanging when logs are reset (or saving syslog settings)
-
12:20 AM Revision 8de52525: Change the way syslogd is killed/restarted a bit. Fixes log related pages hanging when logs are reset (or saving syslog settings)
-
12:04 AM Revision b3e15d1b: Add missing s
-
12:04 AM Revision 48183867: Add missing s
09/30/2011
-
11:57 PM Revision 689eaa4d: Move hostapd to its own log and tab, so it stops spamming the system log.
-
11:57 PM Revision 44b3a75c: Move hostapd to its own log and tab, so it stops spamming the system log.
- 07:21 PM Revision a36a239a: Add Unbound chroot directory path
-
02:28 AM Revision 722112f3: Exclude relayd from main system log, it's really spammy, and is already in relayd.log
-
02:28 AM Revision 3a22174d: Exclude relayd from main system log, it's really spammy, and is already in relayd.log
-
12:15 AM Bug #1344: Replace prototype javascript code with jQuery
- Nice Pagify jQuery plugin https://github.com/cmpolis/Pagify
09/29/2011
-
08:14 PM Revision 747cc15a: Add some missing ;'s.
-
08:14 PM Revision 5e49a14a: Set a full path to remote package from git
-
07:14 PM Revision 146769ae: Show session detail in Virtual Server status
-
07:13 PM Revision ff160984: Show session detail in Virtual Server status
-
04:42 PM Feature #1922 (Closed): Add stge(4) driver
- The stge(4) driver isn't included, but works if loaded from a module.
See http://forum.pfsense.org/index.php/topic... -
02:58 PM Feature #1831: Captive portal IPv6 support
- For CP on IPv6 to work ipfw tables need to be tought about v6 addresses and
ipfw forward at layer2 needs to be coded... -
12:10 PM Feature #1921 (Rejected): Log pass-through mac captive portal
- this isn't possible as MAC passthrough has no session status by design, it's always allowed.
-
03:36 AM Feature #1921 (Rejected): Log pass-through mac captive portal
- It would be nice if the MAC and MAC Description of a computer that is allowed thru the Captive portal with his mac ad...
-
06:40 AM Bug #1910: Duplex description inconsistency
- Applied in changeset commit:6c1ebf813768d2f1952d729c7b43ccc22ffc96cc.
- 03:49 AM Revision 53107064: remove symlinks for PBI binaries
- 03:49 AM Revision 569aeae7: remove PBI even when packages depends on only one PBI package
- 03:49 AM Revision 43dad535: Create symlinks for bin and sbin directories on /usr/local/ after installing a PBI
-
03:02 AM Bug #1920 (Resolved): Incorrect title banner in 2 of 3 "Status: System Logs" Web Configurator pages.
- When using the Web Configurator to navigate to the Status -> System Logs -> Firewall tab, the title of the "Normal Vi...
-
02:28 AM Revision 9a4cfa0b: Try to send the xmlrpc errors to the system log
-
02:21 AM Bug #1918 (Rejected): update status
- that's not a general bug, it's some problem with your system. post to the forum or mailing list.
-
01:34 AM Bug #1918: update status
this appear on 2.0 release on jetway nc9c-550lf-
01:28 AM Bug #1918 (Rejected): update status
- Hi, after the check for update status in dashbord and in menu system > firmware > autoupdate i receive this error : F...
-
02:08 AM Bug #1919 (Resolved): Package re-install loop on console after upgrade - package reinstall take ages on serial console
- In fact, this is not an actual loop.... it's rather an innefiency in update_output_window() when $pkg_interface == "c...
-
01:19 AM Bug #1629: invalid state table entries after WAN IP change
- Hi, the same error in my installation. pfsense 2.0 rel running on jetway nc9c-550lf. I have static public ip, when th...
09/28/2011
-
11:48 PM Revision b3c106a0: Check that we have user password otherwise strange things happen if tehre is nothing stored in the config
-
11:48 PM Revision aa690c34: Correctly check if it is a valid object or not
-
11:48 PM Revision b015aa8c: Check that we have user password otherwise strange things happen if tehre is nothing stored in the config
-
11:47 PM Revision fe032a7e: Correctly check if it is a valid object or not
- 11:32 PM Revision b1b42a06: Combine is_subnet to check for both v4 and v6 subnets
- 11:26 PM Revision fdb9c1db: Add is_subnetv6 for checking of IPv6 subnets
-
10:40 PM Bug #1910 (Feedback): Duplex description inconsistency
- Applied in changeset commit:433e98427c6f66e3170b125c2541896cc073ff0e.
-
06:41 PM Revision 433e9842: Clarify text/settings for media selection. Fixes #1910
-
06:40 PM Revision 6c1ebf81: Clarify text/settings for media selection. Fixes #1910
-
03:40 PM Revision 240ffd2e: Add relayd to Status > Services and widget. Add capability to kill when restarting instead of a simple reload. Implements #1913
-
03:39 PM Revision d3534235: Add relayd to Status > Services and widget. Add capability to kill when restarting instead of a simple reload. Implements #1913
-
02:04 PM Bug #1912 (New): DHCP server domain search list needs input validation
- updated with actual problem. other part a feature in #1917
-
06:02 AM Bug #1912: DHCP server domain search list needs input validation
- If I put "services lan.stdenis lan.auber" in the field, I get a config.xml that contains:
<domain>intranet</dom... -
02:03 PM Feature #1917 (Resolved): DHCP server support for multiple domains in search list
- The DHCP server's search list only supports a single domain, should be extended to support multiple domains such as: ...
-
11:40 AM Feature #1913: Add relayd to Status > Services
- Applied in changeset commit:d353423564517a5038f57996769cb488ec802d7a.
-
11:40 AM Feature #1913 (Feedback): Add relayd to Status > Services
- Applied in changeset commit:240ffd2e7e748f0074d572756cd40bb272b29451.
- 04:57 AM Revision a5566aa8: install/remove packages using PBI
-
12:18 AM Bug #1916 (Resolved): LDAP Authentication ignores user naming attribute
- Using a User Naming Attribute other than CN does not appear to work. Additionally, LDAP authentication (both Diags--...
09/27/2011
-
11:36 PM Bug #1914: LDAP Authentication test wont use credentials
- After a little more testing, it looks like it still WILL use the credentials after the bind test. I did not give anon...
-
10:18 PM Bug #1914 (Closed): LDAP Authentication test wont use credentials
- Im running pfSense 2.0, with an LDAP server running on CentOS6 (iRedmail). Both are in virtual machines, on a connec...
-
11:05 PM Revision e3522ebf: Fixup relayd to handle DNS load balancing as well as standard TCP load balancing.
-
10:50 PM Bug #1915 (Resolved): LDAP "authentication containers" select button is inoperative.
- Steps to reproduce:
1) Create a new auth server of type LDAP.
2) Set all paremeters correctly, and save.
3) Edit ... - 10:39 PM Revision b7b4ab22: Merge branch 'jquery' of github.com:vcoque/pfsense into jquery
- Conflicts:
usr/local/www/index.php - 10:38 PM Revision 300e2c0b: convert javascript code to jQuery on system* files
- 10:31 PM Revision f63932ca: Use jQuery fadeout effect
-
10:31 PM Revision f910c29e: Convert prototype code to jQuery
-
10:31 PM Revision b1678e2d: Convert dashboard ajax code from Prototype to jQuery
-
10:31 PM Revision 9cd55a66: Add jQuery javascript library
-
09:50 PM Revision b7027bae: Adding pbi_ suite of tools
-
09:50 PM Revision af422d55: Adding pbi_create
-
09:13 PM Revision b6d74873: Fixup relayd to handle DNS load balancing as well as standard TCP load balancing.
-
07:06 PM Feature #1913 (Resolved): Add relayd to Status > Services
- Currently relayd does not show up under Status > Services. This makes it difficult to kill/restart relayd if a certai...
- 06:22 PM Revision 64f39f0b: Merge branch 'jquery' of github.com:vcoque/pfsense into jquery
-
06:22 PM Revision 0e7d1686: Convert prototype code to jQuery
-
06:22 PM Revision 81017bc0: Convert dashboard ajax code from Prototype to jQuery
-
06:22 PM Revision 0ce64219: Add jQuery javascript library
-
03:00 PM Bug #1912 (Feedback): DHCP server domain search list needs input validation
- that fills in what you have in that field, and works correctly. Need to see what your <dhcpd> config.xml contains.
-
11:09 AM Bug #1912 (Resolved): DHCP server domain search list needs input validation
- The domain search list box needs input validation to ensure a valid domain is entered there.
-
10:54 AM Bug #636: layer7 not work correctly
- We find it generally works, however adding just a few rules sends our CPU usage to 100%. We're still on one of the RC...
-
10:53 AM Feature #1911 (Closed): Interface Groups
- Interface groups are only usefull now to add firewall rules to multiple interfaces. Problem is that when you want to ...
-
10:18 AM Bug #1910: Duplex description inconsistency
- With "ifconfig -m" My Broadcom, Intel and Realtek chipsets call it "Autoselect" so I think the text can be changed to...
-
10:13 AM Bug #1910: Duplex description inconsistency
- The default is to not set a value, so the OS handles it automatically.
Autonegotiate forces the NIC to autonegotia... -
10:06 AM Bug #1910 (Resolved): Duplex description inconsistency
- In interface configuration when choosing Duplex settings, the help text states:
"Here you can explicitly set speed a... -
08:51 AM pfSense Packages Bug #1880: snort package 2.9 v2
- here is another snort example of what i found earlier with active x missing i guess it's something with the config? i...
-
08:47 AM Feature #1904: DHCP server doesn't allow arbitrary config blocks
- Thank you for updating the ticket -- any comments on whether this feature is under consideration? Maybe even a sim...
Also available in: Atom