pfSense

<?php

/*

	services_ntpd.php

*/

/* ====================================================================

 *	Copyright (c)  2004-2015  Electric Sheep Fencing, LLC. All rights reserved.

 *	Copyright (c)  2004, 2005 Scott Ullrich

 *	Copyright (c)  2013 Dagorlad

 *

 *	Redistribution and use in source and binary forms, with or without modification,

 *	are permitted provided that the following conditions are met:

 *

 *	1. Redistributions of source code must retain the above copyright notice,

 *		this list of conditions and the following disclaimer.

 *

 *	2. Redistributions in binary form must reproduce the above copyright

 *		notice, this list of conditions and the following disclaimer in

 *		the documentation and/or other materials provided with the

 *		distribution.

 *

 *	3. All advertising materials mentioning features or use of this software

 *		must display the following acknowledgment:

 *		"This product includes software developed by the pfSense Project

 *		 for use in the pfSense software distribution. (http://www.pfsense.org/).

 *

 *	4. The names "pfSense" and "pfSense Project" must not be used to

 *		 endorse or promote products derived from this software without

 *		 prior written permission. For written permission, please contact

 *		 coreteam@pfsense.org.

 *

 *	5. Products derived from this software may not be called "pfSense"

 *		nor may "pfSense" appear in their names without prior written

 *		permission of the Electric Sheep Fencing, LLC.

 *

 *	6. Redistributions of any form whatsoever must retain the following

 *		acknowledgment:

 *

 *	"This product includes software developed by the pfSense Project

 *	for use in the pfSense software distribution (http://www.pfsense.org/).

 *

 *	THIS SOFTWARE IS PROVIDED BY THE pfSense PROJECT ``AS IS'' AND ANY

 *	EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

 *	IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

 *	PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE pfSense PROJECT OR

 *	ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

 *	SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

 *	NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

 *	LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

 *	HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

 *	STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

 *	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED

 *	OF THE POSSIBILITY OF SUCH DAMAGE.

 *

 *	====================================================================

 *

 */

/*

	pfSense_MODULE: ntpd

*/

##|+PRIV

##|*IDENT=page-services-ntpd

##|*NAME=Services: NTP

##|*DESCR=Allow access to the 'Services: NTP' page.

##|*MATCH=services_ntpd.php*

##|-PRIV

define(NUMTIMESERVERS, 10);		// The maximum number of configurable time servers

require("guiconfig.inc");

require_once('rrd.inc');

require_once("shaper.inc");

if (!is_array($config['ntpd'])) {

	$config['ntpd'] = array();

}

if (empty($config['ntpd']['interface'])) {

	if (is_array($config['installedpackages']['openntpd']) && is_array($config['installedpackages']['openntpd']['config']) &&

		is_array($config['installedpackages']['openntpd']['config'][0]) && !empty($config['installedpackages']['openntpd']['config'][0]['interface'])) {

		$pconfig['interface'] = explode(",", $config['installedpackages']['openntpd']['config'][0]['interface']);

		unset($config['installedpackages']['openntpd']);

		write_config("Upgraded settings from openttpd");

	} else {

		$pconfig['interface'] = array();

	}

} else {

	$pconfig['interface'] = explode(",", $config['ntpd']['interface']);

}

if ($_POST) {

	unset($input_errors);

	$pconfig = $_POST;

	if (!$input_errors) {

		if (is_array($_POST['interface'])) {

			$config['ntpd']['interface'] = implode(",", $_POST['interface']);

		} elseif (isset($config['ntpd']['interface'])) {

			unset($config['ntpd']['interface']);

		}

		if (!empty($_POST['gpsport']) && file_exists('/dev/'.$_POST['gpsport'])) {

			$config['ntpd']['gpsport'] = $_POST['gpsport'];

		} elseif (isset($config['ntpd']['gpsport'])) {

			unset($config['ntpd']['gpsport']);

		}

		unset($config['ntpd']['prefer']);

		unset($config['ntpd']['noselect']);

		$timeservers = '';

		for ($i = 0; $i < 10; $i++) {

			$tserver = trim($_POST["server{$i}"]);

			if (!empty($tserver)) {

				$timeservers .= "{$tserver} ";

				if (!empty($_POST["servprefer{$i}"])) {

					$config['ntpd']['prefer'] .= "{$tserver} ";

				}

				if (!empty($_POST["servselect{$i}"])) {

					$config['ntpd']['noselect'] .= "{$tserver} ";

				}

			}

		}

		if (trim($timeservers) == "") {

			$timeservers = "pool.ntp.org";

		}

		$config['system']['timeservers'] = trim($timeservers);

		if (!empty($_POST['ntporphan']) && ($_POST['ntporphan'] < 17) && ($_POST['ntporphan'] != '12')) {

			$config['ntpd']['orphan'] = $_POST['ntporphan'];

		} elseif (isset($config['ntpd']['orphan'])) {

			unset($config['ntpd']['orphan']);

		}

		if (!empty($_POST['logpeer'])) {

			$config['ntpd']['logpeer'] = $_POST['logpeer'];

		} elseif (isset($config['ntpd']['logpeer'])) {

			unset($config['ntpd']['logpeer']);

		}

		if (!empty($_POST['logsys'])) {

			$config['ntpd']['logsys'] = $_POST['logsys'];

		} elseif (isset($config['ntpd']['logsys'])) {

			unset($config['ntpd']['logsys']);

		}

		if (!empty($_POST['clockstats'])) {

			$config['ntpd']['clockstats'] = $_POST['clockstats'];

		} elseif (isset($config['ntpd']['clockstats'])) {

			unset($config['ntpd']['clockstats']);

		}

		if (!empty($_POST['loopstats'])) {

			$config['ntpd']['loopstats'] = $_POST['loopstats'];

		} elseif (isset($config['ntpd']['loopstats'])) {

			unset($config['ntpd']['loopstats']);

		}

		if (!empty($_POST['peerstats'])) {

			$config['ntpd']['peerstats'] = $_POST['peerstats'];

		} elseif (isset($config['ntpd']['peerstats'])) {

			unset($config['ntpd']['peerstats']);

		}

		if (empty($_POST['kod'])) {

			$config['ntpd']['kod'] = 'on';

		} elseif (isset($config['ntpd']['kod'])) {

			unset($config['ntpd']['kod']);

		}

		if (empty($_POST['nomodify'])) {

			$config['ntpd']['nomodify'] = 'on';

		} elseif (isset($config['ntpd']['nomodify'])) {

			unset($config['ntpd']['nomodify']);

		}

		if (!empty($_POST['noquery'])) {

			$config['ntpd']['noquery'] = $_POST['noquery'];

		} elseif (isset($config['ntpd']['noquery'])) {

			unset($config['ntpd']['noquery']);

		}

		if (!empty($_POST['noserve'])) {

			$config['ntpd']['noserve'] = $_POST['noserve'];

		} elseif (isset($config['ntpd']['noserve'])) {

			unset($config['ntpd']['noserve']);

		}

		if (empty($_POST['nopeer'])) {

			$config['ntpd']['nopeer'] = 'on';

		} elseif (isset($config['ntpd']['nopeer'])) {

			unset($config['ntpd']['nopeer']);

		}

		if (empty($_POST['notrap'])) {

			$config['ntpd']['notrap'] = 'on';

		} elseif (isset($config['ntpd']['notrap'])) {

			unset($config['ntpd']['notrap']);

		}

		if ((empty($_POST['statsgraph'])) == (isset($config['ntpd']['statsgraph']))) {

			$enable_rrd_graphing = true;

		}

		if (!empty($_POST['statsgraph'])) {

			$config['ntpd']['statsgraph'] = $_POST['statsgraph'];

		} elseif (isset($config['ntpd']['statsgraph'])) {

			unset($config['ntpd']['statsgraph']);

		}

		if (isset($enable_rrd_graphing)) {

			enable_rrd_graphing();

		}

		if (!empty($_POST['leaptxt'])) {

			$config['ntpd']['leapsec'] = base64_encode($_POST['leaptxt']);

		} elseif (isset($config['ntpd']['leapsec'])) {

			unset($config['ntpd']['leapsec']);

		}

		if (is_uploaded_file($_FILES['leapfile']['tmp_name'])) {

			$config['ntpd']['leapsec'] = base64_encode(file_get_contents($_FILES['leapfile']['tmp_name']));

		}

		write_config("Updated NTP Server Settings");

		$retval = 0;

		$retval = system_ntp_configure();

		$savemsg = get_std_save_message($retval);

	}

}

function build_interface_list() {

	global $pconfig;

	$iflist = array('options' => array(), 'selected' => array());

	$interfaces = get_configured_interface_with_descr();

	$carplist = get_configured_carp_interface_list();

	foreach ($carplist as $cif => $carpip) {

		$interfaces[$cif] = $carpip . " (" . get_vip_descr($carpip) .")";

	}

	$aliaslist = get_configured_ip_aliases_list();

	foreach ($aliaslist as $aliasip => $aliasif) {

		$interfaces[$aliasip] = $aliasip." (".get_vip_descr($aliasip).")";

	}

	$size = (count($interfaces) < 10) ? count($interfaces) : 10;

	foreach ($interfaces as $iface => $ifacename) {

		if (!is_ipaddr(get_interface_ip($iface)) && !is_ipaddr($iface)) {

			continue;

		}

		$iflist['options'][$iface] = $ifacename;

		if (in_array($iface, $pconfig['interface'])) {

			array_push($iflist['selected'], $iface);

		}

	}

	return($iflist);

}

$closehead = false;

$pconfig = &$config['ntpd'];

if (empty($pconfig['interface'])) {

	$pconfig['interface'] = array();

} else {

	$pconfig['interface'] = explode(",", $pconfig['interface']);

}

$pgtitle = array(gettext("Services"), gettext("NTP"));

$shortcut_section = "ntp";

include("head.inc");

if ($input_errors)

	print_input_errors($input_errors);

if ($savemsg)

	print_info_box($savemsg, 'success');

$tab_array = array();

$tab_array[] = array(gettext("NTP"), true, "services_ntpd.php");

$tab_array[] = array(gettext("Serial GPS"), false, "services_ntpd_gps.php");

$tab_array[] = array(gettext("PPS"), false, "services_ntpd_pps.php");

display_top_tabs($tab_array);

require_once('classes/Form.class.php');

$form = new Form;

$section = new Form_Section('NTP server configuration');

$iflist = build_interface_list();

$section->addInput(new Form_Select(

	'interface',

	'Interface',

	$iflist['selected'],

	$iflist['options'],

	true

))->setHelp('Interfaces without an IP address will not be shown.' . '<br />' .

			'Selecting no interfaces will listen on all interfaces with a wildcard.' . '<br />' .

			'Selecting all interfaces will explicitly listen on only the interfaces/IPs specified.');

$maxrows = 3;

$timeservers = explode( ' ', $config['system']['timeservers']);

for ($counter=0; $counter < $maxrows; $counter++) {

	$group = new Form_Group($counter == 0 ? 'Time servers':'');

	$group->addClass('repeatable');

	$group->add(new Form_Input(

		'server' . $counter,

		null,

		'text',

		$timeservers[$counter],

		['placeholder' => 'Hostname']

	 ))->setWidth(3);

	 $group->add(new Form_Checkbox(

		'servprefer' . $counter,

		null,

		null,

		isset($config['ntpd']['prefer']) && isset($timeservers[$counter]) && substr_count($config['ntpd']['prefer'], $timeservers[$counter])

	 ))->sethelp('Prefer');

	 $group->add(new Form_Checkbox(

		'servselect' . $counter,

		null,

		null,

		isset($config['ntpd']['noselect']) && isset($timeservers[$counter]) && substr_count($config['ntpd']['noselect'], $timeservers[$counter])

	 ))->sethelp('No Select');

	$group->add(new Form_Button(

		'deleterow' . $counter,

		'Delete'

	))->removeClass('btn-primary')->addClass('btn-warning');

	 $section->add($group);

}

$section->addInput(new Form_Button(

	'addrow',

	'Add'

))->removeClass('btn-primary')->addClass('btn-success');

$section->addInput(new Form_StaticText(

	null,

	$btnaddrow

))->setHelp('For best results three to five servers should be configured here.' . '<br />' .

			'The prefer option indicates that NTP should favor the use of this server more than all others.' . '<br />' .

			'The noselect option indicates that NTP should not use this server for time, but stats for this server will be collected and displayed.');

$section->addInput(new Form_Input(

	'ntporphan',

	'Orphan mode',

	'text',

	$pconfig['ntporphan']

))->setHelp('Orphan mode allows the system clock to be used when no other clocks are available. ' .

			'The number here specifies the stratum reported during orphan mode and should normally be set to a number high enough ' .

			'to insure that any other servers available to clients are preferred over this server. (default: 12).');

$section->addInput(new Form_Checkbox(

	'statsgraph',

	'NTP Graphs',

	'Enable RRD graphs of NTP statistics (default: disabled).',

	$pconfig['statsgraph']

));

$section->addInput(new Form_Checkbox(

	'logpeer',

	'Syslog logging',

	'Enable logging of peer messages (default: disabled).',

	$pconfig['logpeer']

));

$section->addInput(new Form_Checkbox(

	'logsys',

	null,

	'Enable logging of system messages (default: disabled).',

	$pconfig['logsys']

))->setHelp('These options enable additional messages from NTP to be written to the System Log ' .

			'<a href="diag_logs_ntpd.php">' . 'Status > System Logs > NTP' . '</a>');

// Statistics logging section

$btnadvstats = new Form_Button(

	'btnadvstats',

	'Advanced'

);

$btnadvstats->removeClass('btn-primary')->addClass('btn-default btn-sm');

$section->addInput(new Form_StaticText(

	'Statistics logging',

	$btnadvstats

))->setHelp('Warning: These options will create persistent daily log files in /var/log/ntp.');

$section->addInput(new Form_Checkbox(

	'clockstats',

	null,

	'Enable logging of reference clock statistics (default: disabled).',

	$pconfig['clockstats']

));

$section->addInput(new Form_Checkbox(

	'loopstats',

	null,

	'Enable logging of clock discipline statistics (default: disabled).',

	$pconfig['loopstats']

));

$section->addInput(new Form_Checkbox(

	'peerstats',

	null,

	'Enable logging of NTP peer statistics (default: disabled).',

	$pconfig['peerstats']

));

// Access restrictions section

$btnadvrestr = new Form_Button(

	'btnadvrestr',

	'Advanced'

);

$btnadvrestr->removeClass('btn-primary')->addClass('btn-default btn-sm');

$section->addInput(new Form_StaticText(

	'Access Restrictions',

	$btnadvrestr

))->setHelp('These options control access to NTP from the WAN.');

$section->addInput(new Form_Checkbox(

	'kod',

	null,

	'Enable Kiss-o\'-death packets (default: enabled).',

	$pconfig['kod']

));

$section->addInput(new Form_Checkbox(

	'nomodify',

	null,

	'Deny state modifications (i.e. run time configuration) by ntpq and ntpdc (default: enabled).',

	$pconfig['nomodify']

));

$section->addInput(new Form_Checkbox(

	'noquery',

	null,

	'Disable ntpq and ntpdc queries (default: disabled).',

	$pconfig['noquery']

));

$section->addInput(new Form_Checkbox(

	'noserve',

	null,

	'Disable all except ntpq and ntpdc queries (default: disabled).',

	$pconfig['noserve']

));

$section->addInput(new Form_Checkbox(

	'nopeer',

	null,

	'Deny packets that attempt a peer association (default: enabled).',

	$pconfig['nopeer']

));

$section->addInput(new Form_Checkbox(

	'notrap',

	null,

	'Deny mode 6 control message trap service (default: enabled).',

	$pconfig['notrap']

))->addClass('advrestrictions');

// Leap seconds section

$btnleap = new Form_Button(

	'btnleap',

	'Advanced'

);

$btnleap->removeClass('btn-primary')->addClass('btn-default btn-sm');

$section->addInput(new Form_StaticText(

	'Leap seconds',

	$btnleap

))->setHelp('A leap second file allows NTP to advertize an upcoming leap second addition or subtraction. ' .

			'Normally this is only useful if this server is a stratum 1 time server. ');

$section->addInput(new Form_Textarea(

	'leaptext',

	null,

	base64_decode(chunk_split($pconfig['leapsec']))

))->setHelp('Enter Leap second configuration as text OR select a file to upload');

$section->addInput(new Form_Input(

	'leapfile',

	null,

	'file'

))->addClass('btn-default');

$form->add($section);

print($form);

?>

<script>

//<![CDATA[

events.push(function(){

	function setMasks() {

		// Find all ipaddress masks and make dynamic based on address family of input

		$('span.pfIpMask + select').each(function (idx, select){

			var input = $(select).prevAll('input[type=text]');

			input.on('change', function(e){

				var isV6 = (input.val().indexOf(':') != -1), min = 0, max = 128;

				if (!isV6)

					max = 32;

				if (input.val() == "")

					return;

				while (select.options.length > max)

					select.remove(0);

				if (select.options.length < max)

				{

					for (var i=select.options.length; i<=max; i++)

						select.options.add(new Option(i, i), 0);

				}

			});

			// Fire immediately

			input.change();

		});

	}

	// Complicated function to move all help text associated with this input id to the same id

	// on the row above. That way if you delete the last row, you don't lose the help

	function moveHelpText(id) {

		$('#' + id).parent('div').parent('div').find('input').each(function() {	 // For each <span></span>

			var fromId = this.id;

			var toId = decrStringInt(fromId);

			var helpSpan;

			if(!$(this).hasClass('pfIpMask') && !$(this).hasClass('btn')) {

				helpSpan = $('#' + fromId).parent('div').parent('div').find('span:last').clone();

				if($(helpSpan).hasClass('help-block')) {

					if($('#' + decrStringInt(fromId)).parent('div').hasClass('input-group'))

						$('#' + decrStringInt(fromId)).parent('div').after(helpSpan);

					else

						$('#' + decrStringInt(fromId)).after(helpSpan);

				}

			}

		});

	}

	// Increment the number at the end of the string

	function bumpStringInt( str )	{

	  var data = str.match(/(\D*)(\d+)(\D*)/), newStr = "";

	  if( data )

		newStr = data[ 1 ] + ( Number( data[ 2 ] ) + 1 ) + data[ 3 ];

	  return newStr || str;

	}

	// Decrement the number at the end of the string

	function decrStringInt( str )	{

	  var data = str.match(/(\D*)(\d+)(\D*)/), newStr = "";

	  if( data )

		newStr = data[ 1 ] + ( Number( data[ 2 ] ) - 1 ) + data[ 3 ];

	  return newStr || str;

	}

	// Called after a delete so that there are no gaps in the numbering. Most of the time the config system doesn't care about

	// gaps, but I do :)

	function renumber() {

		var idx = 0;

		$('.repeatable').each(function() {

			$(this).find('input').each(function() {

				$(this).prop("id", this.id.replace(/\d+$/, "") + idx);

				$(this).prop("name", this.name.replace(/\d+$/, "") + idx);

			});

			$(this).find('select').each(function() {

				$(this).prop("id", this.id.replace(/\d+$/, "") + idx);

				$(this).prop("name", this.name.replace(/\d+$/, "") + idx);

			});

			$(this).find('label').attr('for', $(this).find('label').attr('for').replace(/\d+$/, "") + idx);

			idx++;

		});

	}

	function delete_row(row) {

		$('#' + row).parent('div').parent('div').remove();

		renumber();

	}

	function add_row() {

		// Find the lst repeatable group

		var lastRepeatableGroup = $('.repeatable:last');

		// Clone it

		var newGroup = lastRepeatableGroup.clone(true);

		// Increment the suffix number for each input elemnt in the new group

		$(newGroup).find('input').each(function() {

			$(this).prop("id", bumpStringInt(this.id));

			$(this).prop("name", bumpStringInt(this.name));

			if(!$(this).is('[id^=delete]'))

				$(this).val('');

		});

		// Do the same for selectors

		$(newGroup).find('select').each(function() {

			$(this).prop("id", bumpStringInt(this.id));

			$(this).prop("name", bumpStringInt(this.name));

			// If this selector lists mask bits, we need it to be reset to all 128 options

			// and no items selected, so that automatic v4/v6 selection still works

			if($(this).is('[id^=address_subnet]')) {

				$(this).empty();

				for(idx=128; idx>0; idx--) {

					$(this).append($('<option>', {

						value: idx,

						text: idx

					}));

				}

			}

		});

		// And for "for" tags

		$(newGroup).find('label').attr('for', bumpStringInt($(newGroup).find('label').attr('for')));

		$(newGroup).find('label').text(""); // Clear the label. We only want it on the very first row

		// Insert the updated/cloned row

		$(lastRepeatableGroup).after(newGroup);

/*

		// Delete any help text from the group we have cloned

		$(lastRepeatableGroup).find('.help-block').each(function() {

			$(this).remove();

		});

*/

		setMasks();

		$('[id^=address]').autocomplete({

			source: addressarray

		});

	}

	// These are action buttons, not submit buttons

	$('[id^=addrow]').prop('type','button');

	$('[id^=delete]').prop('type','button');

	// on click . .

	$('[id^=addrow]').click(function() {

		add_row();

	});

	$('[id^=delete]').click(function(event) {

		if($('.repeatable').length > 1) {

	//		moveHelpText(event.target.id);

			delete_row(event.target.id);

		}

		else

			alert('<?php echo gettext("You may not delete the last one!")?>');

	});

	// Make the ‘clear’ button a plain button, not a submit button

	$('#btnadvstats').prop('type','button');

	// On click, show the controls in the stats section

	$("#btnadvstats").click(function() {

		hideCheckbox('clockstats', false);

		hideCheckbox('loopstats', false);

		hideCheckbox('peerstats', false);

	});

	// Make the ‘clear’ button a plain button, not a submit button

	$('#btnadvrestr').prop('type','button');

	// On click, show the controls in the restrictions section

	$("#btnadvrestr").click(function() {

		hideCheckbox('nomodify', false);

		hideCheckbox('noquery', false);

		hideCheckbox('noserve', false);

		hideCheckbox('nopeer', false);

		hideCheckbox('notrap', false);

	});

	// Make the ‘btnleap’ button a plain button, not a submit button

	$('#btnleap').prop('type','button');

	// On click, show the controls in the leap seconds section

	$("#btnleap").click(function() {

		hideInput('leaptext', false);

		hideInput('leapfile', false);

	});

	// Set intial states

	hideCheckbox('clockstats', true);

	hideCheckbox('loopstats', true);

	hideCheckbox('peerstats', true);

	hideCheckbox('kod', true);

	hideCheckbox('nomodify', true);

	hideCheckbox('noquery', true);

	hideCheckbox('noserve', true);

	hideCheckbox('nopeer', true);

	hideCheckbox('notrap', true);

	hideInput('leaptext', true);

	hideInput('leapfile', true);

});

//]]>

</script>

<?php include("foot.inc");