Project

General

Profile

Actions
Copy link

Bug #2495

closed

pfsense doesn't seem to know what its WAN IP is

Added by Phil Lavin almost 12 years ago. Updated over 9 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
Interfaces
Target version:
2.2
Start date:
06/14/2012
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
All
Affected Architecture:

Description

Having upgraded from stable to 2.1-BETA0 (i386) (built on Mon Jun 11 03:04:03 EDT 2012), a strange issue has occurred. The WAN interface IP is configured as 31.24.0.195/26 and there's 3 IP aliases to this interface:

31.24.0.198/32
31.24.0.196/32
31.24.0.200/32

pfsense thinks the WAN interface IP is 31.24.0.196. This shows in a few different ways:

  • The IPSec Local IP is 31.24.0.196 - this causes ipsec to break.
  • None of the firewall rules permitting access to "WAN address" work - rather they allow access to 31.24.0.196 instead
  • I cannot edit the 31.24.0.196 IP alias as it says an alias cannot be the WAN address

Interestingly, changing the WAN IP subnet from /26 to /25 fixes this issue and pfsense correctly identifies its WAN IP. This is what I have put in place, presently, pending a better fix.

Files

Download all files
config-pfsense.localdomain-20130806121907.xml (18.7 KB) config-pfsense.localdomain-20130806121907.xml problematic config.xml Thomas Rieschl, 08/06/2013 05:35 AM
console_after.png (26.7 KB) console_after.png console output after adding the alias and rebooting Thomas Rieschl, 08/06/2013 05:35 AM
console_before.png (27.1 KB) console_before.png console output before adding the alias Thomas Rieschl, 08/06/2013 05:35 AM
ifconfig_after.png (92.9 KB) ifconfig_after.png ifconfig output after adding the alias and rebooting Thomas Rieschl, 08/06/2013 05:35 AM
ifconfig_after-add-before-reboot.png (92.8 KB) ifconfig_after-add-before-reboot.png ifconfig after adding the alias but before rebooting Thomas Rieschl, 08/06/2013 05:35 AM
ifconfig_after-refresh.png (92.4 KB) ifconfig_after-refresh.png ifconfig after save and apply on br0 infterface configuration Thomas Rieschl, 08/06/2013 05:35 AM
ifconfig_before.png (90.2 KB) ifconfig_before.png ifconfig before adding the alias Thomas Rieschl, 08/06/2013 05:35 AM
interfaces_after.png (46.6 KB) interfaces_after.png WebGUI Status-Interfaces after adding the alias and rebooting Thomas Rieschl, 08/06/2013 05:35 AM
interfaces_before.png (46.9 KB) interfaces_before.png WebGUI Status-Interfaces before adding the alias Thomas Rieschl, 08/06/2013 05:35 AM
Actions
Copy link

Also available in: Atom PDF