|
Copyright (c) 1992-2016 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
FreeBSD is a registered trademark of The FreeBSD Foundation.
|
|
FreeBSD 11.0-RELEASE-p6 #82 1de2b093b6d(RELENG_2_4): Wed Jan 25 09:55:45 CST 2017
|
|
root@buildbot2.netgate.com:/builder/ce/tmp/obj/builder/ce/tmp/FreeBSD-src/sys/pfSense amd64
|
|
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
|
|
VT(vga): resolution 640x480
|
|
CPU: Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz (3392.23-MHz K8-class CPU)
|
|
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
|
|
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
|
|
AMD Features2=0x21<LAHF,ABM>
|
|
Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
|
|
XSAVE Features=0x1<XSAVEOPT>
|
|
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
|
|
TSC: P-state invariant, performance statistics
|
|
real memory = 17179869184 (16384 MB)
|
|
avail memory = 16560259072 (15793 MB)
|
|
Event timer "LAPIC" quality 600
|
|
ACPI APIC Table: <ALASKA A M I>
|
|
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
|
|
FreeBSD/SMP: 1 package(s) x 4 core(s)
|
|
ioapic0 <Version 2.0> irqs 0-23 on motherboard
|
|
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
|
|
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80675440, 0) error 1
|
|
random: entropy device external interface
|
|
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
|
|
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806754f0, 0) error 1
|
|
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
|
|
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806755a0, 0) error 1
|
|
wlan: mac acl policy registered
|
|
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
|
|
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8069e9d0, 0) error 1
|
|
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
|
|
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8069ea80, 0) error 1
|
|
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
|
|
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8069eb30, 0) error 1
|
|
kbd1 at kbdmux0
|
|
netmap: loaded module
|
|
module_register_init: MOD_LOAD (vesa, 0xffffffff8122a980, 0) error 19
|
|
random: registering fast source Intel Secure Key RNG
|
|
random: fast provider: "Intel Secure Key RNG"
|
|
vtvga0: <VT VGA driver> on motherboard
|
|
cryptosoft0: <software crypto> on motherboard
|
|
padlock0: No ACE support.
|
|
acpi0: <ALASKA A M I> on motherboard
|
|
acpi0: Power Button (fixed)
|
|
cpu0: <ACPI CPU> on acpi0
|
|
cpu1: <ACPI CPU> on acpi0
|
|
cpu2: <ACPI CPU> on acpi0
|
|
cpu3: <ACPI CPU> on acpi0
|
|
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
Timecounter "HPET" frequency 14318180 Hz quality 950
|
|
Event timer "HPET" frequency 14318180 Hz quality 550
|
|
Event timer "HPET1" frequency 14318180 Hz quality 440
|
|
Event timer "HPET2" frequency 14318180 Hz quality 440
|
|
Event timer "HPET3" frequency 14318180 Hz quality 440
|
|
Event timer "HPET4" frequency 14318180 Hz quality 440
|
|
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
|
|
atrtc0: Warning: Couldn't map I/O.
|
|
Event timer "RTC" frequency 32768 Hz quality 0
|
|
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
|
|
Timecounter "i8254" frequency 1193182 Hz quality 0
|
|
Event timer "i8254" frequency 1193182 Hz quality 100
|
|
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
|
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
pci0: <ACPI PCI bus> on pcib0
|
|
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
|
|
pci1: <ACPI PCI bus> on pcib1
|
|
pcib2: <ACPI PCI-PCI bridge> mem 0xdf500000-0xdf53ffff irq 16 at device 0.0 on pci1
|
|
pci2: <ACPI PCI bus> on pcib2
|
|
pcib3: <PCI-PCI bridge> irq 16 at device 8.0 on pci2
|
|
pci3: <PCI bus> on pcib3
|
|
pcib4: <PCI-PCI bridge> irq 17 at device 9.0 on pci2
|
|
pci4: <PCI bus> on pcib4
|
|
pcib5: <PCI-PCI bridge> irq 16 at device 16.0 on pci2
|
|
pci5: <PCI bus> on pcib5
|
|
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe020-0xe03f mem 0xdf420000-0xdf43ffff,0xdf000000-0xdf3fffff,0xdf4c4000-0xdf4c7fff irq 16 at device 0.0 on pci5
|
|
igb0: Using MSIX interrupts with 2 vectors
|
|
igb0: Ethernet address: 00:1b:21:78:ff:42
|
|
igb0: netmap queues/slots: TX 1/1024, RX 1/1024
|
|
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xdf400000-0xdf41ffff,0xde800000-0xdebfffff,0xdf4c0000-0xdf4c3fff irq 17 at device 0.1 on pci5
|
|
igb1: Using MSIX interrupts with 2 vectors
|
|
igb1: Ethernet address: 00:1b:21:78:ff:43
|
|
igb1: netmap queues/slots: TX 1/1024, RX 1/1024
|
|
pcib6: <PCI-PCI bridge> irq 17 at device 17.0 on pci2
|
|
pci6: <PCI bus> on pcib6
|
|
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xde100000-0xde10ffff irq 16 at device 20.0 on pci0
|
|
xhci0: 32 bytes context size, 64-bit DMA
|
|
xhci0: Port routing mask set to 0xffffffff
|
|
usbus0 on xhci0
|
|
pci0: <simple comms> at device 22.0 (no driver attached)
|
|
pci0: <simple comms> at device 22.1 (no driver attached)
|
|
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xde114000-0xde1143ff irq 20 at device 26.0 on pci0
|
|
usbus1: EHCI version 1.0
|
|
usbus1 on ehci0
|
|
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
|
|
pcib7: [GIANT-LOCKED]
|
|
pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
|
|
pci7: <ACPI PCI bus> on pcib8
|
|
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci7
|
|
pci8: <ACPI PCI bus> on pcib9
|
|
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xdc000000-0xddffffff,0xde000000-0xde01ffff irq 18 at device 0.0 on pci8
|
|
vgapci0: Boot video device
|
|
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
|
|
pci9: <ACPI PCI bus> on pcib10
|
|
pcib11: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci9
|
|
pci10: <ACPI PCI bus> on pcib11
|
|
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
|
|
pci11: <ACPI PCI bus> on pcib12
|
|
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0xdfa00000-0xdfa7ffff,0xdfa80000-0xdfa83fff irq 16 at device 0.0 on pci11
|
|
igb2: Using MSIX interrupts with 2 vectors
|
|
igb2: Ethernet address: 38:2c:4a:c8:31:09
|
|
igb2: netmap queues/slots: TX 1/1024, RX 1/1024
|
|
pcib13: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
|
|
pci12: <ACPI PCI bus> on pcib13
|
|
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xb000-0xb01f mem 0xdf900000-0xdf97ffff,0xdf980000-0xdf983fff irq 17 at device 0.0 on pci12
|
|
igb3: Using MSIX interrupts with 2 vectors
|
|
igb3: Ethernet address: 38:2c:4a:c8:31:0a
|
|
igb3: netmap queues/slots: TX 1/1024, RX 1/1024
|
|
pcib14: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
|
|
pci13: <ACPI PCI bus> on pcib14
|
|
igb4: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa000-0xa01f mem 0xdf800000-0xdf87ffff,0xdf880000-0xdf883fff irq 18 at device 0.0 on pci13
|
|
igb4: Using MSIX interrupts with 2 vectors
|
|
igb4: Ethernet address: 38:2c:4a:c8:31:0b
|
|
igb4: netmap queues/slots: TX 1/1024, RX 1/1024
|
|
pcib15: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
|
|
pci14: <ACPI PCI bus> on pcib15
|
|
igb5: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x9000-0x901f mem 0xdf700000-0xdf77ffff,0xdf780000-0xdf783fff irq 19 at device 0.0 on pci14
|
|
igb5: Using MSIX interrupts with 2 vectors
|
|
igb5: Ethernet address: 38:2c:4a:c8:31:0c
|
|
igb5: netmap queues/slots: TX 1/1024, RX 1/1024
|
|
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xde113000-0xde1133ff irq 23 at device 29.0 on pci0
|
|
usbus2: EHCI version 1.0
|
|
usbus2 on ehci1
|
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
|
isa0: <ISA bus> on isab0
|
|
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xde112000-0xde1127ff irq 19 at device 31.2 on pci0
|
|
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
|
|
ahcich0: <AHCI channel> at channel 0 on ahci0
|
|
ahcich1: <AHCI channel> at channel 1 on ahci0
|
|
ahcich2: <AHCI channel> at channel 2 on ahci0
|
|
ahcich3: <AHCI channel> at channel 3 on ahci0
|
|
ahcich4: <AHCI channel> at channel 4 on ahci0
|
|
ahcich5: <AHCI channel> at channel 5 on ahci0
|
|
ahciem0: <AHCI enclosure management bridge> on ahci0
|
|
acpi_button0: <Power Button> on acpi0
|
|
acpi_tz0: <Thermal Zone> on acpi0
|
|
acpi_tz1: <Thermal Zone> on acpi0
|
|
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
|
|
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
|
|
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
|
|
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
|
|
ppbus0: <Parallel port bus> on ppc1
|
|
lpt0: <Printer> on ppbus0
|
|
lpt0: Interrupt-driven port
|
|
ppi0: <Parallel I/O> on ppbus0
|
|
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
|
|
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
|
|
atkbd0: <AT Keyboard> irq 1 on atkbdc0
|
|
kbd0 at atkbd0
|
|
atkbd0: [GIANT-LOCKED]
|
|
ppc0: cannot reserve I/O port range
|
|
est0: <Enhanced SpeedStep Frequency Control> on cpu0
|
|
est1: <Enhanced SpeedStep Frequency Control> on cpu1
|
|
est2: <Enhanced SpeedStep Frequency Control> on cpu2
|
|
est3: <Enhanced SpeedStep Frequency Control> on cpu3
|
|
Timecounters tick every 1.000 msec
|
|
nvme cam probe device init
|
|
usbus0: 5.0Gbps Super Speed USB v3.0
|
|
usbus1: 480Mbps High Speed USB v2.0
|
|
usbus2: 480Mbps High Speed USB v2.0
|
|
ugen0.1: <0x8086> at usbus0
|
|
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
|
|
ugen1.1: <Intel> at usbus1
|
|
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
|
|
ugen2.1: <Intel> at usbus2
|
|
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
|
|
uhub2: 2 ports with 2 removable, self powered
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
uhub0: 21 ports with 21 removable, self powered
|
|
ugen0.2: <American Megatrends Inc.> at usbus0
|
|
uhub3: <7-port Hub> on usbus0
|
|
ugen2.2: <vendor 0x8087> at usbus2
|
|
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
|
|
ugen1.2: <vendor 0x8087> at usbus1
|
|
uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
|
|
uhub4: 6 ports with 6 removable, self powered
|
|
uhub5: 6 ports with 6 removable, self powered
|
|
uhub3: 5 ports with 5 removable, self powered
|
|
ugen0.3: <American Megatrends Inc.> at usbus0
|
|
ukbd0: <Keyboard Interface> on usbus0
|
|
kbd2 at ukbd0
|
|
ugen0.4: <American Megatrends Inc.> at usbus0
|
|
umass0: <Virtual Cdrom> on usbus0
|
|
ugen0.5: <American Megatrends Inc.> at usbus0
|
|
umass1: <Virtual Floppy> on usbus0
|
|
ugen0.6: <American Megatrends Inc.> at usbus0
|
|
umass2: <Virtual HardDisk> on usbus0
|
|
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
|
|
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
|
|
ses0: SEMB SES Device
|
|
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
|
|
ada0: <KINGSTON SV300S37A60G 603ABBF0> ATA8-ACS SATA 3.x device
|
|
ada0: Serial Number 50026B775502EC6E
|
|
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
|
|
ada0: Command Queueing enabled
|
|
ada0: 57241MB (117231408 512 byte sectors)
|
|
da0 at umass-sim1 bus 1 scbus8 target 0 lun 0
|
|
da0: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device
|
|
SMP: AP CPU #2 Launched!
|
|
SMP: AP CPU #3 Launched!
|
|
SMP: AP CPU #1 Launched!
|
|
da0: Serial Number AAAABBBBCCCC2
|
|
da0: 40.000MB/s transfers
|
|
da0: Attempt to query device size failed: NOT READY, Medium not present
|
|
da0: quirks=0x2<NO_6_BYTE>
|
|
da1 at umass-sim2 bus 2 scbus9 target 0 lun 0
|
|
da1: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device
|
|
da1: Serial Number AAAABBBBCCCC3
|
|
da1: 40.000MB/s transfers
|
|
da1: Attempt to query device size failed: NOT READY, Medium not present
|
|
da1: quirks=0x2<NO_6_BYTE>
|
|
cd0 at umass-sim0 bus 0 scbus7 target 0 lun 0
|
|
cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device
|
|
cd0: Serial Number AAAABBBBCCCC1
|
|
cd0: 40.000MB/s transfers
|
|
cd0: Attempt to query device size failed: NOT READY, Medium not present
|
|
cd0: quirks=0x10<10_BYTE_ONLY>
|
|
Timecounter "TSC-low" frequency 1696112502 Hz quality 1000
|
|
Trying to mount root from ufs:/dev/ufsid/56205ab2f758c632 [rw]...
|
|
random: unblocking device.
|
|
padlock0: No ACE support.
|
|
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
|
|
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
|
|
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
|
|
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
|
|
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
|
|
vlan0: changing name to 'igb2_vlan10'
|
|
igb2: link state changed to UP
|
|
igb2_vlan10: link state changed to UP
|
|
vlan1: changing name to 'igb3_vlan1'
|
|
vlan2: changing name to 'igb4_vlan13'
|
|
vlan3: changing name to 'igb5_vlan15'
|
|
vlan4: changing name to 'igb1_vlan25'
|
|
vlan5: changing name to 'igb0_vlan50'
|
|
tun1: changing name to 'ovpns1'
|
|
ovpns1: link state changed to UP
|
|
pflog0: promiscuous mode enabled
|
|
igb1: link state changed to UP
|
|
igb1_vlan25: link state changed to UP
|
|
igb0: link state changed to UP
|
|
igb0_vlan50: link state changed to UP
|
|
igb3: link state changed to UP
|
|
igb3_vlan1: link state changed to UP
|
|
igb4: link state changed to UP
|
|
igb4_vlan13: link state changed to UP
|
|
igb5: link state changed to UP
|
|
igb5_vlan15: link state changed to UP
|