Bug #10193
closed
PPPoE wrong default route
0%
Description
I'm running newest stable pfSense 2.4.4 in KVM virt (pcie passed through NICs, should be identical to physical/baremetal) and I experience a wrong default route interface selection on every cold boot.
Strangely enough, once rebooted from pfSense itself the route gets fixed.
This is the wrong default route:
default 10.0.0.1UGS lagg0
And this is what it should be:
default 10.0.0.1 UGS pppoe0
Thus need to apply this every single time (or reboot from the webui/cli):
route del -net default
route add default 10.0.0.1
It appears that it selects the LAN interface (lagg0) instead of the WAN (pppoe0). I did even set explicitly the default gateway to be the pppoe one.
This issue may or may not be related to this other one: https://redmine.pfsense.org/issues/9192 , as I only experience it on cold boots. It does resolve with another reboot (from cli/webui) and it doesn't come up again if the pppoe is reconnected.
Updated by Jim Pingle over 5 years ago
- Category set to Interfaces
- Status changed from New to Rejected
- Priority changed from Urgent to Normal
Please post on the forum to discuss and diagnose the issue. It is more likely you have a configuration issue here and not a bug, since this doesn't appear to be happening to others. If an actionable bug can be identified, then an issue with more specific details can be opened.