pfSense

Hi

the bus gas been noticed on on latest pfsense+ 22.05, I have an ipsec tunnel between 2 routers: using ipv4 addresses as tunnel end point ips

my pfsense is in the cloud and installed on the remote VPS, I can access it via public ip (accessed via trusted IPs that have been addedin the fw rules on pfsense ) the other end is my home and I am connecting from home.

I noticed that every time when I access it (pfsnse) the IP I am coming from is always ipv6, being curious I disabled ipv6 stack from my network card and could not log in at all via ipv4.

Opened it from the other pc via ipv6, did packet capture: when I try to connect from my pc (same IP v4 as as the remote tunnel end from the pfsense perspective) I see 0 attempts in the logs:

These are the only logs I was able to see, there is no port 443 https logs at all, just port 500 for ipsec

19:09:12.395810 IP 109.107.xxx.xxx.500 (this is the pfsense side) > 121.99.xxx.xxx.500: UDP, length 80 (this is me from home pc)
19:09:12.702034 IP 121.99.xxx.xxx.500 > 109.107.xxx.xxx.500: UDP, length 80

======================================================

disabled ipsec tunnel on the pfsense, was immediately able to connect from pc on ipv4 to the remote pfsense, then reenabled ipsec and immediately lost ipv4 management of Pfsense

19:10:35.879707 IP 121.99.xxx.xxx.58635 > 109.107.xxx.xxx.443: tcp 0
19:10:35.879853 IP 109.107.xxx.xxx.443 > 121.99.xxx.xxx.58635: tcp 0

https://forum.netgate.com/topic/173480/bug-found-ipsec-vpn-ipv4-and-web-management-do-not-work-together?_=1657971319399

can that be replicated?
thank you