pfSense » pfSense Plus

Chelsio T520-CR and T420-CR are unable to route speeds over 470mbps when updated to 23.01 code. Goes to full 1gb speed after reverting back to 22.05. WAN is on Intel i210-AT chip, LAN is on 10gb Chelsio on a DAC cable going into 10gb switch. Other devices on network are also running 10Gb.
Hardware:
Supermicro SYS-5019S-M (https://www.supermicro.com/en/products/system/1U/5019/SYS-5019S-M.cfm)
Intel(R) Xeon(R) CPU E3-1220 v5
Chelsio T520-CR

1gb wan on copper
10gb LAN on DAC (also running vlans router-on-a-stick on this interface)

Initial postings were on Netgate forums (https://forum.netgate.com/topic/177885/upgrade-to-23-01-wan-speed-halved/26?_=1679281728569)

I did test with putting in a Chelsio t420 card with similar results. Additionally throwing a 1gb sfp copper module in the Chelsio T520 and changing the WAN to it and was still having the same results.

10g to 10g test run at full speed. Just 10gb to 1gb are impacted, even when done from 10gb client to 1gb client on LAN (not going out the WAN).