Project

General

Profile

Actions
Copy link

Bug #15783

closed

NTP server broken

Added by Terje Rosenlund 16 days ago. Updated 15 days ago.

Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
Services
Target version:
-
Start date:
Due date:
% Done:

0%

Estimated time:
Release Notes:
Default
Affected Plus Version:
24.03
Affected Architecture:
SG-1100

Description

System Netgate 1100
Serial: NTG2309000948
Netgate Device ID: de164b1be6d099b1117e
BIOS Vendor: U-Boot
Version: 2018.03-devel-18.12.3-gc9aa92c-dirty
Release Date: Wed Oct 13 2021
Boot Environment
- Current: default
- Next: default
Version 24.03-RELEASE (arm64)
built on Wed Apr 24 19:38:00 CEST 2024
FreeBSD 15.0-CURRENT

The system is on the latest version.
Version information updated at Tue Oct 15 11:32:31 CEST 2024
CPU Type ARM Cortex-A53 r0p4
2 CPUs :
- CPU 0: ARM Cortex-A53 r0p4 affinity: 0
- CPU 1: ARM Cortex-A53 r0p4 affinity: 1
IPsec-MB Crypto: Yes (inactive)
SafeXcel Crypto: Yes (inactive)
Hardware crypto Inactive
Uptime 52 Days 18 Hours 17 Minutes 34 Seconds
Current date/time
Tue Oct 15 13:02:46 CEST 2024
DNS server(s)
127.0.0.1
::1
148.122.16.253
148.122.164.253
1.1.1.1
Last config change Fri Oct 11 20:42:05 CEST 2024
State table size
1% (583/95000) Show states
MBUF Usage
6% (3798/59719)
Load average
0.56, 0.42, 0.30
CPU usage
25%
Memory usage
37% of 957 MiB

Services / NTP / Settings
Enable NTP Server checked
All settings as default (0.no.pool.ntp.org - 3.no.pool.ntp.org, none Prefer, none No Select, Pool)

Test: Windows 11, controlpanel, Date/Time, Internet-clock, Change settings,
- Server: 10.20.30.1 (PfSense on Netgate), Update Now -> Timeout
- Server: 10.20.30.40 (Ubuntu), Update Now -> Ok

Firewall log on PfSense, LAN, UDP, all traffic between source and destination
- PfSense as NTP:
- Request logged
- No reply
- Ubuntu as NTP server:
- Request logged
- Reply logged

Wireshark on client shows the same

Conclusion: NTP client on PfSense is broken (No reply)

Actions
Copy link
 #1

Updated by Jim Pingle 15 days ago

  • Status changed from New to Rejected

I cannot reproduce any problem with the NTP client on 24.03 with a default install. It is properly synchronizing with upstream servers and a local client can query the service and obtain a proper NTP response. There is likely something in your configuration which is contributing to the problem, as some of the settings you mention are not defaults on current installations of pfSense software.

This site is not for support or diagnostic discussion.

For assistance in solving problems, please post on the Netgate Forum .

See Reporting Issues with pfSense Software for more information.

Actions
Copy link

Also available in: Atom PDF