Project

General

Profile

Actions

Bug #236

closed

DHCP Server IP Range Validation

Added by Tyler Simpkin almost 12 years ago. Updated almost 12 years ago.

Status:
Closed
Priority:
High
Assignee:
-
Category:
DHCP (IPv4)
Target version:
Start date:
12/19/2009
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.0
Affected Architecture:

Description

When LAN subnet is changed from default, it seems impossible to select a valid IP address range for the DHCP server.

Errors out with the following:

The following input errors were detected:
  • The specified range lies outside of the current subnet.

and

The DHCP Server can only be enabled on interfaces configured with static IP addresses.

The interfaces not configured with static ip will not be shown.

"Available Range" displays the correct values.....

Actions #1

Updated by Scott Ullrich almost 12 years ago

I am having trouble reproducing this. Could you please elaborate on how to reproduce (include the range you where trying to use and the IP address of the interface in question)

Actions #2

Updated by Scott Ullrich almost 12 years ago

  • Status changed from New to Feedback
Actions #3

Updated by Tyler Simpkin almost 12 years ago

Must have been a bad snapshot. Recent (today's) snapshots function normally.

Actions #4

Updated by Chris Buechler almost 12 years ago

  • Status changed from Feedback to Closed
Actions

Also available in: Atom PDF