Project

General

Profile

Actions

Bug #4414

closed

pfsense on amd64 Thinclient Futro S550 // 2.1.5 // 2.2

Added by tom stern over 10 years ago. Updated about 10 years ago.

Status:
Rejected
Priority:
Very Low
Assignee:
Category:
Upgrade
Target version:
-
Start date:
02/12/2015
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.2
Affected Architecture:
amd64

Description

Hello@All

on my labs firewalls (Thinclient Futro S550 /amd64/1GB/CF-Card-4G)

--2.1.5 will only boot "headless" without keyb/vga if set loader.conf to:
boot_verbose="1" ##must set cause to disable keyboard check ##
comconsole_speed="9600"
hw.usb.no_pf="1

Bios-Settings:
- VGA-Shared-RAM-Fixed-to-32MB/ACPI-to-Bios/and USB/LPT/Sound off!

NO boot on 2.2 after update, no with/without "verbose mode"

The Kernel sucks after boot-loader.
with
" / " stopping slash - rotation modules load.

No warm reboot! only cold reset boots up on 2.1.5, on 2.2 no boot!!

Linux: cat /proc/cpuinfo :
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 108
model name : Mobile AMD Sempron(tm) Processor 2100+
stepping : 2
cpu MHz : 999.905
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse3 6 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow up extd_ apicid pni cx16 lahf_lm extapic cr8_legacy 3dnowprefetch
bogomips : 2000.13
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps


Files

dmesg.txt (21.5 KB) dmesg.txt tom stern, 02/12/2015 01:19 PM
dmesg-bsd-10.txt (22 KB) dmesg-bsd-10.txt tom stern, 02/13/2015 02:47 AM
Actions #1

Updated by tom stern over 10 years ago

dmesg.txt added

Actions #2

Updated by Jeremy Porter over 10 years ago

  • Priority changed from High to Very Low

This is not a supported platform.
Try booting stock freebsd 10.1 off a USB stick.
Also post the full verbose kernel log. You may need to get that from the serial port.

Actions #3

Updated by Chris Buechler over 10 years ago

  • Status changed from New to Rejected

hardware-specific problem, replicate on stock FreeBSD 10.1 and report upstream.

Actions #4

Updated by tom stern over 10 years ago

Hello Chris,

thanks for your reply
i added a dmesg dump of 2.1.5

I hope you find the bug.

thanks Tom
www_linuxonlinehelp_de

Actions #5

Updated by Chris Buechler about 10 years ago

  • Target version deleted (2.2.1)
Actions

Also available in: Atom PDF