Project

General

Profile

Actions

Bug #7285

closed

Wrong state with old pppoe WAN IP address (Static Port)

Added by slu - about 7 years ago. Updated about 7 years ago.

Status:
Duplicate
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
02/20/2017
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.3.2
Affected Architecture:

Description

Firewall / NAT / Outbound -> Hybrid Outbound NAT rule generation.
Static port for Source/Destination udp/5060 interface VDSL (pppoe).

Unfortunately we get every 24h a new IP and this look like a problem with the static port.
For some reason the states (Diagnostics / States / States) hold the state with the old pppoe IP address in "Source (Original Source)".

Not sure this happens every time (timing issue?), but really often.

Actions #1

Updated by Kill Bill about 7 years ago

Duplicate of Bug #4674

Actions #2

Updated by Jim Pingle about 7 years ago

  • Status changed from New to Duplicate
Actions

Also available in: Atom PDF