Bug #8074
closed
Captive Portal RADIUS WISPr-Bandwith-Up value used incorrectly creating Limited rules
0%
Description
Since pfSense 2.4.0 and the re-write of Captive Portal, the RADIUS WISPr-Bandwidth-Up value is being used incorrectly when setting up limiter bandwidth values.
The following is an example of the WISPr-Bandwidth-Up values and the limited bandwidth created;
262144000 -> 26.144Mbps
26214400 -> 26.214Kbps
2621440 -> 2.62Kbps
262144 -> 262bps
WISPr-Bandwidth-Up should be bits per second. So a value of 262144 should be 26.214Kbps NOT 262bps.
This causes uses upload bandwidth to be severely limited and unusable.
Updated by Richard Gate over 6 years ago
Sorry should have set the Affected Version to 2.4.0
Updated by Richard Gate over 6 years ago
Some more info.
I also get this problem in version 2.4.1
I've been looking at the code in /etc/inc/captiveportal.inc in function poral_allow() around line 2303 where pfSense_ipfw_pipe() is usded.
If I put som logging in there the value for $bw_up is correct at 262.
If I hard code the bandwidth, it works ok.
So change - $_gb = @pfSense_ipfw_pipe("pipe {$bw_up_pipeno} config bw {$bw_up}Kbit/s queue 100 buckets 16");
to - $_gb = @pfSense_ipfw_pipe("pipe {$bw_up_pipeno} config bw 262Kbit/s queue 100 buckets 16");
Updated by Jim Pingle over 6 years ago
- Status changed from New to Duplicate
I didn't notice this one, but the description was not quite right. The real bug is in #8097 and there is a fix in 2.4.2 for it now.
Updated by Richard Gate over 6 years ago
Thanks, yes I must have typed that too fast, fingers going faster than brain :-)