Actions
Bug #8282
closedEnabling CODELQ on virtual interface VLAN crashes appliance
Status:
Resolved
Priority:
Normal
Assignee:
-
Category:
Traffic Shaper (Limiters)
Target version:
-
Start date:
01/15/2018
Due date:
% Done:
0%
Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.4.2
Affected Architecture:
Description
I was working to reduce buffer bloat on a client's SG-4860 and I enabled CODELQ on a virtual interface for one of the VLAN's. Shortly after this the appliance crashed while performing a speed test until I could go onsite and reboot it with the WAN & LAN cable's disconnected and then once it was booted I connected the LAN so I could remove the CODELQ changes.
Crash log: [https://pastebin.com/raw/gjmhnDdU]
Updated by Jim Pingle over 4 years ago
- Category changed from Traffic Shaper (ALTQ) to Traffic Shaper (Limiters)
- Status changed from New to Resolved
Old report and no recent recurrences. Lots of things in this area have changed, so most likely it's either fixed no longer relevant.
If you still have issues, post on the forum with more detail about your setup.
Actions