Actions
Bug #9017
closed
Policy based Routing is not working
Status:
Not a Bug
Priority:
Normal
Assignee:
-
Category:
Gateways
Target version:
-
Start date:
10/05/2018
Due date:
% Done:
0%
Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
Affected Architecture:
Description
I have following setup on my firewall.
2 internet gateways
WGW1 and WGW2
2 Vlans
Vlan 10 and Vlan 20
Created a Group gateway where WGW1 is Tier 1 and WGw2 is Tier 2.
Created another where WGW2 is Tier 1 and WGw1 is Tier 2.
Assigned to individual VLAN through forwarding rules. But it is not working. All the traffic still goes to Default gateway. It does failover but Vlan 10 and Vlan 20 does not respective gateways.
It was working in older release. I tested it in 2.4.3
Updated by Jim Pingle over 6 years ago
- Status changed from New to Not a Bug
Policy routing is working fine here. Most likely you have a problem with your configuration or rules. Please post on the forum for assistance with resolving your issue.
Actions