Some hardware is taking too long to set ACCEPT_RTADV on the Interface, this results in RTSOLD exiting and this not sending RS to start the process. Apart from adding a delay to the start of RTSOLD which did improve but not totally fix the issue the other change is to prevent the call to -ACCEPT_RTADV if the interface is using DHCP6.
-ACCEPT_RTADV in the case of wancfg['dhcp6usev4iface'] || $wancfg['ipaddr']==='ppp'
Cleaning up dhcp6c kill calls.
ppp-ipv6 Changed to call kill_dhcp6client_process() to make sure the lock files are also cleared.
Interfaces.php Changed to call kill_dhcp6client_process() to make sure the lock files are also cleared.
Added by Martin Wasley over 8 years ago
WAN flap loss of IPv6
Some hardware is taking too long to set ACCEPT_RTADV on the Interface,
this results in RTSOLD exiting and this not sending RS to start the
process. Apart from adding a delay to the start of RTSOLD which did
improve but not totally fix the issue the other change is to prevent the
call to -ACCEPT_RTADV if the interface is using DHCP6.
-ACCEPT_RTADV in the case of wancfg['dhcp6usev4iface'] || $wancfg['ipaddr']==='ppp'
Cleaning up dhcp6c kill calls.
ppp-ipv6
Changed to call kill_dhcp6client_process() to make
sure the lock files are also cleared.
Interfaces.php
Changed to call kill_dhcp6client_process() to make
sure the lock files are also cleared.