pfSense

<?php

/*

	gmirror.inc

	Copyright (C) 2009-2014 Jim Pingle

	Redistribution and use in source and binary forms, with or without

	modification, are permitted provided that the following conditions are met:

	1. Redistributions of source code must retain the above copyright notice,

	this list of conditions and the following disclaimer.

	2. Redistributions in binary form must reproduce the above copyright

	notice, this list of conditions and the following disclaimer in the

	documentation and/or other materials provided with the distribution.

	THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,

	INClUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

	AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

	AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

	OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

	INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

	CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

	POSSIBILITY OF SUCH DAMAGE.

*/

global $balance_methods;

$balance_methods = array("load", "prefer", "round-robin", "split");

/* Create a status array for each mirror and its disk components. */

function gmirror_get_status() {

	$status = "";

	exec("/sbin/gmirror status -s", $status);

	$mirrors = array();

	/* Empty output = no mirrors found */

	if (count($status) > 0) {

		/* Loop through gmirror status output. */

		foreach ($status as $line) {

			/* Split the line by whitespace */

			$all = preg_split("/[\s\t]+/", trim($line), 3);

			if (count($all) == 3) {

				/* If there are three items on a line, it is mirror name, status, and component */

				$currentmirror = basename($all[0]);

				$mirrors[$currentmirror]['name'] = basename($all[0]);

				$mirrors[$currentmirror]['status'] = $all[1];

			}

		}

	}

}

/* Get only status word for a single mirror. */

function gmirror_get_status_single($mirror) {

	$status = "";

	$mirror_status = gmirror_get_status();

	return $mirror_status[$mirror]['status'];

}

/* Generate an HTML formatted status for mirrors and disks in a small format for the widget */

function gmirror_html_status() {

	$mirrors = gmirror_get_status();

	$output = "";

?>

</div>

<?php

		return;

?>

		<tr>

			<th>Name</td>

			<th>Status</td>

			<th>Component</td>

		</tr>

	</thead>

	<tbody>

<?php foreach ($mirrors as $mirror => $name): ?>

		<tr>

			<td rowspan="<?=count($name["components"])?>"><?=$name['name']?></td>

			<td rowspan="<?=count($name["components"])?>"><?=$name['status']?></td>

			<td><?=$name['components'][0]?></td>

		</tr>

<?php if (count($name["components"]) > 1): ?>

		<?php foreach (array_slice($name["components"], 1) as $component): ?>

			<tr>

				<td><?=$component?></td>

			</tr>

		<?php endforeach; ?>

	<?php endif; ?>

<?php endforeach;

/* List all disks in the system (potential gmirror targets) */

function gmirror_get_disks() {

	$disklist = "";

	/* Get a list of disks in a scriptable way, exclude optical drives */

	exec("/sbin/geom disk status -s | /usr/bin/grep -v '[[:blank:]]*cd[[:digit:]]*' | /usr/bin/awk '{print $1;}'", $disklist);

	return $disklist;

}

/* List all potential gmirror consumers */

function gmirror_get_unused_consumers() {

	$consumerlist = "";

	exec("/sbin/geom part status -s | /usr/bin/egrep -v '(mirror|diskid)' | /usr/bin/awk '{print $1, $3;}'", $consumerlist);

	$all_consumers = array();

	foreach ($consumerlist as $cl) {

		$parts = explode(" ", $cl);

		if (!is_consumer_used($d) && !in_array($d, $all_consumers)) {

			$all_consumers[] = $d;

		}

	}

}

/* List all existing geom mirrors */

function gmirror_get_mirrors() {

	$mirrorlist = "";

	exec("/sbin/gmirror list | /usr/bin/grep '^Geom name:' | /usr/bin/awk '{print $3;}'", $mirrorlist);

	return $mirrorlist;

}

/* List all consumers for a given mirror */

function gmirror_get_consumers_in_mirror($mirror) {

	$consumers = array();

	exec("/sbin/gmirror status -s " . escapeshellarg($mirror) . " | /usr/bin/awk '{print $3;}'", $consumers);

	return $consumers;

}

/* Test if a given consumer is a member of an existing mirror */

function is_consumer_in_mirror($consumer, $mirror) {

	$mirrorconsumers = gmirror_get_consumers_in_mirror($mirror);

	return in_array(basename($consumer), $mirrorconsumers);

}

/* Test if a mirror exists */

function is_valid_mirror($mirror) {

	$mirrors = gmirror_get_mirrors();

	return in_array($mirror, $mirrors);

}

/* Test if a disk is valid/exists */

function is_valid_disk($disk) {

	$adisks = gmirror_get_disks();

	return in_array(basename($disk), $adisks);

}

/* Test if a consumer is valid and in use in a mirror */

function is_consumer_used($consumer) {

	$found = false;

	$mirrors = gmirror_get_mirrors();

	foreach ($mirrors as $mirror) {

		$consumers = gmirror_get_consumers_in_mirror($mirror);

	return false;

}

/* Test if a consumer is valid and not in use */

function is_consumer_unused($consumer) {

	$consumers = gmirror_get_unused_consumers();

	return in_array($consumer, $consumers);

}

/* Test if a consumer is valid (either a disk or partition) */

function is_valid_consumer($consumer) {

	return (is_consumer_unused($consumer) || is_consumer_used($consumer));

}

/* Remove all disconnected drives from a mirror */

function gmirror_forget_disconnected($mirror) {

}

/* Insert another consumer into a mirror */

function gmirror_insert_consumer($mirror, $consumer) {

}

/* Remove consumer from a mirror and clear its metadata */

function gmirror_remove_consumer($mirror, $consumer) {

}

/* Wipe geom info from drive (if mirror is not running) */

function gmirror_clear_consumer($consumer) {

}

/* Find the balance method used by a given mirror */

function gmirror_get_mirror_balance($mirror) {

	exec("/sbin/gmirror list " . escapeshellarg($mirror) . " | /usr/bin/grep '^Balance:' | /usr/bin/awk '{print $2;}'", $balancemethod);

	return $balancemethod[0];

}

/* Change balance algorithm of the mirror */

function gmirror_configure_balance($mirror, $balancemethod) {

}

/* Force a mirror member to rebuild */

function gmirror_force_rebuild($mirror, $consumer) {

}

/* Show all metadata on the physical consumer */

function gmirror_get_consumer_metadata($consumer) {

	exec("/sbin/gmirror dump " . escapeshellarg($consumer), $output);

	return array_map('trim', $output);

}

/* Test if a consumer has metadata, indicating it is a member of a mirror (active or inactive) */

function gmirror_consumer_has_metadata($consumer) {

	return (count(gmirror_get_consumer_metadata($consumer)) > 0);

}

/* Find the mirror to which this consumer belongs */

function gmirror_get_consumer_metadata_mirror($consumer) {

	foreach ($metadata as $line) {

		if (substr($line, 0, 5) == "name:") {

			list ($key, $value) = explode(":", $line, 2);

			return trim($value);

		}

	}

}

/* Deactivate consumer, removing it from service in the mirror, but leave metadata intact */

function gmirror_deactivate_consumer($mirror, $consumer) {

}

/* Reactivate a deactivated consumer */

function gmirror_activate_consumer($mirror, $consumer) {

}

/* Find the size of the given mirror */

function gmirror_get_mirror_size($mirror) {

	exec("/sbin/gmirror list " . escapeshellarg($mirror) . " | /usr/bin/grep 'Mediasize:' | /usr/bin/head -n 1 | /usr/bin/awk '{print $2;}'", $mirrorsize);

	return $mirrorsize[0];

}

/* Return a list of all potential consumers on a disk with sizes. The geom part

	list output is a little odd, we can't get the output for just the disk, if the disk contains

	slices those get output also. */

function gmirror_get_all_unused_consumer_sizes_on_disk($disk) {

	exec("/sbin/geom part list " . escapeshellarg($disk) . " | /usr/bin/egrep '(Name:|Mediasize:)' | /usr/bin/cut -c4- | /usr/bin/sed -l -e 'N;s/\\nMediasize://;P;D;' | /usr/bin/cut -c7-", $output);

		exec("/sbin/geom disk list " . escapeshellarg($disk) . " | /usr/bin/egrep '(Name:|Mediasize:)' | /usr/bin/cut -c4- | /usr/bin/sed -l -e 'N;s/\\nMediasize://;P;D;' | /usr/bin/cut -c7-", $output);

	}

	foreach ($output as $line) {

		list($name, $size, $humansize) = explode(" ", $line, 3);

		$consumer = array();

		$consumer['name'] = $name;

		$consumer['size'] = $size;

		$consumer['humansize'] = $humansize;

		$disk_contents[] = $consumer;

	}

	return $disk_contents;

}

/* Get only the size for one specific potential consumer. */

function gmirror_get_unused_consumer_size($consumer) {

	$consumersizes = gmirror_get_all_unused_consumer_sizes_on_disk($consumer);

	foreach ($consumersizes as $csize) {

	return -1;

}